Maximum TIRE(Rubber) fitment thread - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Z33dori · 12-05-2007, 12:49 AM

wow that would have been F-'d up if this were closed....

back on topic...

does anyone have a pics with 240 pushing 315s...is this even possible on a S Chassis

Prok0 · 12-05-2007, 01:12 AM

Quote:

Originally Posted by Z33dori

does anyone have a pics with 240 pushing 315s...is this even possible on a S Chassis

315 bfg drag radials, stock fender.

Subzeroqc · 12-05-2007, 05:15 PM

Quote:

Originally Posted by Prok0

315 bfg drag radials, stock fender.

wheel specs plz? I was looking to fit some 305's back there but need advice on offset for stock fenders.

Prok0 · 12-05-2007, 07:02 PM

Just to clarify, that isnt my car, although I know the guy who owned it at the time..

Wheel specs, not really sure other then they are 17x10 mas italy wheels made for a stang.. So offsets probably in the +20 to +30 range.

And the fender was rolled.

godzillarb · 12-06-2007, 04:25 AM

Quote:

Originally Posted by Prok0

Just to clarify, that isnt my car, although I know the guy who owned it at the time..

Wheel specs, not really sure other then they are 17x10 mas italy wheels made for a stang.. So offsets probably in the +20 to +30 range.

And the fender was rolled.

IIRC they're +27 with 305s, not 315s.

bigblak06 · 02-29-2008, 08:57 AM

15x10 -38 offset

Z33dori · 02-29-2008, 12:37 PM

Quote:

Originally Posted by bigblak06

15x10 -38 offset

wtf those look like 19s

SILVIA_KIDs14.5 · 02-24-2009, 08:08 AM

Quote:

Originally Posted by Prok0

315 bfg drag radials, stock fender.

more info like rim size width ect

cdlong · 12-05-2007, 04:45 PM

Quote:

Originally Posted by a_ahmed

^Uhm its already been done have you even seen my first post... even on an s13... 295 front and 315 rear...

flares make anything possible. if Prok0 ran flares he could fit 355s or something obnoxious. it's impressive because it's on a virtually stock body.

posdrift240 · 12-06-2007, 06:03 AM

Quote:

Originally Posted by Z33dori

wow that would have been F-'d up if this were closed....

back on topic...

does anyone have a pics with 240 pushing 315s...is this even possible on a S Chassis

isnt 315's about 11.50" - 12.00" wide? I don't have 315's but I am Running 11.50 M:T drag Radials!! I am running a 35mm offset.

[email protected] · 03-14-2010, 04:45 PM

because pan

12-05-2007, 12:49 AM	#1
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 35 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	wow that would have been F-'d up if this were closed.... back on topic... does anyone have a pics with 240 pushing 315s...is this even possible on a S Chassis __________________

12-05-2007, 07:02 PM	#4
Prok0 Zilvia Junkie Join Date: Apr 2003 Location: FL Age: 37 Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	Just to clarify, that isnt my car, although I know the guy who owned it at the time.. Wheel specs, not really sure other then they are 17x10 mas italy wheels made for a stang.. So offsets probably in the +20 to +30 range. And the fender was rolled. __________________ Sales @ Enjuku email:[email protected] phone:352-241-8399

02-29-2008, 08:57 AM	#6
bigblak06 Join Date: Sep 2006 Location: riverside Age: 36 Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	check these out 15x10 -38 offset

03-14-2010, 04:45 PM	#11
[email protected] Leaky Injector Join Date: Apr 2009 Location: ONTARIO,CA Age: 34 Posts: 140 Trader Rating: (9) Feedback Score: 9 reviews	because pan Last edited by [email protected]; 03-14-2010 at 09:50 PM..