R32 GTR Rust to Riches - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rik boellen · 12-11-2016, 01:10 PM

Love your build!

Please put the nismo decals one spoke further
The valve must be down and than the 2nd spoke on the right
Ps. The stamped jil and Via are in correct way between the valve
Pps. You need the gold and blue decals if you order new one's

Best regards

I can sent you pictures from mine if you like to

hvp014 · 12-14-2016, 08:05 AM

Quote:

Originally Posted by rik boellen

Love your build!

Please put the nismo decals one spoke further
The valve must be down and than the 2nd spoke on the right
Ps. The stamped jil and Via are in correct way between the valve
Pps. You need the gold and blue decals if you order new one's

Best regards

I can sent you pictures from mine if you like to

Thanks for the very astute observations, I ordered over sized decals when I had the wheels refinished and enjoy the larger look and color. They're not cleared over so its a simple peel and restick but I not too picky there.

hvp014 · 12-28-2016, 12:16 AM

Small update, got around to installing my new door seals I've had sitting around. Not too difficult and one more thing in making the car last.

Also the completed under hood shot.

And a little video, sorry for the shaky cam. Need a camera mount.

hvp014 · 01-16-2017, 02:51 AM

Small update

Got a chance to install the Nismo wheel studs (+20mm) and threw the LMGT1's back on after a good cleaning.

Was able to wrap the down and screamer pipe in wrap and blanket the turbine to help with under-hood heat.

And finally got the car back from detailing, and was able to work out the fine scratches.

Before and after!

Up next would be an alignment and some good driving.

12-11-2016, 01:10 PM	#1
rik boellen Leaky Injector Join Date: Dec 2010 Location: the netherlands Age: 43 Posts: 115 Trader Rating: (1) Feedback Score: 1 reviews	Love your build! Please put the nismo decals one spoke further The valve must be down and than the 2nd spoke on the right Ps. The stamped jil and Via are in correct way between the valve Pps. You need the gold and blue decals if you order new one's Best regards I can sent you pictures from mine if you like to

12-28-2016, 12:16 AM	#3
hvp014 Leaky Injector Join Date: Aug 2012 Location: Okinawa, Japan Age: 35 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	Small update, got around to installing my new door seals I've had sitting around. Not too difficult and one more thing in making the car last. Also the completed under hood shot. And a little video, sorry for the shaky cam. Need a camera mount.

01-16-2017, 02:51 AM	#4
hvp014 Leaky Injector Join Date: Aug 2012 Location: Okinawa, Japan Age: 35 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	Small update Got a chance to install the Nismo wheel studs (+20mm) and threw the LMGT1's back on after a good cleaning. Was able to wrap the down and screamer pipe in wrap and blanket the turbine to help with under-hood heat. And finally got the car back from detailing, and was able to work out the fine scratches. Before and after! Up next would be an alignment and some good driving.