wastegate vacuum to hotpipe or outlet pipe - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Po_31 · 10-05-2012, 02:14 AM

first of all i have a sr20det

I would like to know if anyone has actually installed a hose fitting or something else into their hotpipe as a means for the vacuum to the wastegate? i seen some people on different forums drill a 1/8 npt to the turbo outlet pipe instead, would either one of these work which would you choose
thanks

s14boy · 10-05-2012, 02:30 AM

just get a t-hose barb connector and cut on of your vac lines and run it from their. its simple no need to drill anything.

compactfean · 10-05-2012, 10:15 AM

I don't know why.everyone thinks its ok to t off a vacuum line. internal waste gates aren't supposed to see vacuum and is clearly shown in vacuum diagrams. weld in a nipple to the hotpipe, that's how I have mine setup.

Po_31 · 10-05-2012, 10:55 AM

Quote:

Originally Posted by compactfean

I don't know why.everyone thinks its ok to t off a vacuum line. internal waste gates aren't supposed to see vacuum and is clearly shown in vacuum diagrams. weld in a nipple to the hotpipe, that's how I have mine setup.

thanks alot
just making sure i did right the first time

waxball88 · 10-05-2012, 02:13 PM

Quote:

Originally Posted by compactfean

I don't know why.everyone thinks its ok to t off a vacuum line. internal waste gates aren't supposed to see vacuum and is clearly shown in vacuum diagrams. weld in a nipple to the hotpipe, that's how I have mine setup.

This
If you want to run it to the manifold just run a one way check valve. Wastegates need a BOOST source.
Hotpipe/compressor housing

silviaNC · 10-06-2012, 09:54 PM

sorry to get in the thread but this is how I have mine set-up. do I need to change anything on it?

I'm using option 2. is it right?

*wangan_cruiser* · 10-07-2012, 01:32 AM

i drilled a hole one of the couplers on my hotpipe then used this for my actuator

Turbo Quick Tap Fitting for Boost Source

works great. the closer the line to the actuator the faster it responds

10-05-2012, 02:14 AM	#1
Po_31 Nissanaholic! Join Date: Jan 2011 Location: houston Posts: 2,476 Trader Rating: (28) Feedback Score: 28 reviews	wastegate vacuum to hotpipe or outlet pipe first of all i have a sr20det I would like to know if anyone has actually installed a hose fitting or something else into their hotpipe as a means for the vacuum to the wastegate? i seen some people on different forums drill a 1/8 npt to the turbo outlet pipe instead, would either one of these work which would you choose thanks

10-05-2012, 02:30 AM	#2
s14boy Zilvia FREAK! Join Date: Oct 2010 Location: chicago Posts: 1,077 Trader Rating: (26) Feedback Score: 26 reviews	just get a t-hose barb connector and cut on of your vac lines and run it from their. its simple no need to drill anything.

10-05-2012, 10:15 AM	#3
compactfean Leaky Injector Join Date: Dec 2009 Location: reno Age: 38 Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	I don't know why.everyone thinks its ok to t off a vacuum line. internal waste gates aren't supposed to see vacuum and is clearly shown in vacuum diagrams. weld in a nipple to the hotpipe, that's how I have mine setup.

10-06-2012, 09:54 PM	#6
silviaNC Zilvia Addict Join Date: Feb 2012 Location: North Carolina Age: 40 Posts: 937 Trader Rating: (17) Feedback Score: 17 reviews	sorry to get in the thread but this is how I have mine set-up. do I need to change anything on it? I'm using option 2. is it right?

10-07-2012, 01:32 AM	#7
wangan_cruiser kouki man Join Date: Apr 2006 Location: downtown oakland,ca Age: 39 Posts: 3,535 Trader Rating: (36) Feedback Score: 36 reviews	i drilled a hole one of the couplers on my hotpipe then used this for my actuator Turbo Quick Tap Fitting for Boost Source works great. the closer the line to the actuator the faster it responds