#@%^&@$ Tow truck driver.. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SlidewayzS14 · 08-16-2007, 01:16 PM

So the guy bend my inner tie rod on my passenger side. Should i replace both sides or is it ok to do just the one side? If the inner is bent, do i have to replace the outter? the outter is the tie rod end correct?

MavericStephenc · 08-16-2007, 01:22 PM

i would replace both, one would think outers should be fine, this is a good excuse to upgrade hehe

!Zar! · 08-16-2007, 01:29 PM

How did the tow truck driver bend your tierod?

Just go to splparts.com and pick up their inner and outter tierod setup.

EDacIouSX · 08-16-2007, 01:30 PM

yea get new inner and outer tierods. from spl or some reputable company preferably.

lazierhobo · 08-16-2007, 02:35 PM

then send the bill to the tow truck driver!!

markapple0507 · 05-24-2009, 11:54 PM

but the really question is whether to buy stock, as in its oem and has worked fine and will work fine, or go all out and make sure it'll handle all your lowering and drift angle needs and get spl.. check it out, its expensive but i'm pretty much in the same position and debating with i should go stock or spl all the way?

Nezahualcoyotl · 05-24-2009, 11:57 PM

wtf? you serious?

DrtyRat · 05-25-2009, 07:53 AM

Nice bump, on a 2yr old thread

08-16-2007, 01:16 PM	#1
SlidewayzS14 Leaky Injector Join Date: Jun 2007 Location: Kelowna, British Columbia Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	#@%^&@$ Tow truck driver.. So the guy bend my inner tie rod on my passenger side. Should i replace both sides or is it ok to do just the one side? If the inner is bent, do i have to replace the outter? the outter is the tie rod end correct?

08-16-2007, 01:29 PM	#3
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	How did the tow truck driver bend your tierod? Just go to splparts.com and pick up their inner and outter tierod setup. __________________

08-16-2007, 01:22 PM	#2
MavericStephenc Zilvia Addict Join Date: Aug 2006 Location: salem mass. Age: 36 Posts: 830 Trader Rating: (0) Feedback Score: 0 reviews	i would replace both, one would think outers should be fine, this is a good excuse to upgrade hehe

08-16-2007, 01:30 PM	#4
EDacIouSX Post Whore! Join Date: Nov 2004 Location: Los Angeles Age: 38 Posts: 4,565 Trader Rating: (53) Rides Gallery: EDacIouSX Feedback Score: 53 reviews	yea get new inner and outer tierods. from spl or some reputable company preferably.

08-16-2007, 02:35 PM	#5
lazierhobo Zilvia Member Join Date: Sep 2006 Location: upstate NY Posts: 228 Trader Rating: (0) Feedback Score: 0 reviews	then send the bill to the tow truck driver!!

05-24-2009, 11:54 PM	#6
markapple0507 Zilvia Member Join Date: Jan 2009 Location: El Paso, Tx Age: 33 Posts: 189 Trader Rating: (4) Feedback Score: 4 reviews	but the really question is whether to buy stock, as in its oem and has worked fine and will work fine, or go all out and make sure it'll handle all your lowering and drift angle needs and get spl.. check it out, its expensive but i'm pretty much in the same position and debating with i should go stock or spl all the way?

05-24-2009, 11:57 PM	#7
Nezahualcoyotl Zilvia Addict Join Date: Oct 2006 Location: Santa Ana, California Age: 36 Posts: 769 Trader Rating: (16) Feedback Score: 16 reviews	wtf? you serious?