Nardi classic won't fit my nrg quick release - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jrod12 · 08-12-2014, 08:59 PM

Recently bought a slim hub and quick release from
NRg and I bought a nardi classic 340mm black steering wheel for my 1990 240sx hatch when I got all my stuff mounted and ready to go I whent to bolt on my classic and noticed only one hole would line up at a time is there a adapter or something else like mounting it to the hub

eek · 08-12-2014, 09:02 PM

You sure you lined up the hub correctly? Did you try rotating the quick release so its straight? Should have no issues lining up a NRG QR and Nardi wheel.

KoukiMonsta · 08-12-2014, 09:08 PM

nardi and nrg definitely go together

now fake ass nardi might just be another story..

slowvia · 08-12-2014, 09:30 PM

I had a similar issue. My Nardi wouldn't bolt onto my NRG hub. I found out that the hub I had had the bolt pattern for a Momo wheel. I found an adapter on eBay for cheap that fixed the issue.

eek · 08-12-2014, 10:17 PM

If its a NRG 2.0 or higher quick release it will fit ANY 6 bolt pattern steering wheel. That is why there are soo many holes on the quick release. If you are running JUST the NRG hub, then you will need an adapter since the NRG hub only accepts Momo pcd spacing.

HyperTek · 08-12-2014, 11:09 PM

nrg slim works
http://cdn.mkimg.carview.co.jp/minka...6873c0e347.jpg

wild7driftboy · 08-13-2014, 12:07 AM

The quick release was a 5 hole the steering wheel is a 6hole

slowvia · 08-22-2014, 09:57 PM

Quote:

Originally Posted by HyperTek

nrg slim works
http://cdn.mkimg.carview.co.jp/minka...6873c0e347.jpg

Must be a new thing. Mine did not fit. I even emailed them to ask and they told me I'd need a quick release or an adapter. But the adaptor only ran me about $4 or $5.

08-12-2014, 08:59 PM	#1
Jrod12 Leaky Injector Join Date: Oct 2011 Location: Cali Posts: 92 Trader Rating: (1) Feedback Score: 1 reviews	Nardi classic won't fit my nrg quick release Recently bought a slim hub and quick release from NRg and I bought a nardi classic 340mm black steering wheel for my 1990 240sx hatch when I got all my stuff mounted and ready to go I whent to bolt on my classic and noticed only one hole would line up at a time is there a adapter or something else like mounting it to the hub

08-12-2014, 11:09 PM	#6
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,224 Trader Rating: (3) Feedback Score: 3 reviews	nrg slim works http://cdn.mkimg.carview.co.jp/minka...6873c0e347.jpg __________________ Keep it Classy

08-13-2014, 12:07 AM	#7
wild7driftboy Zilvia Addict Join Date: Jul 2007 Location: Hanford/Fresno Posts: 812 Trader Rating: (4) Feedback Score: 4 reviews	The quick release was a 5 hole the steering wheel is a 6hole __________________

08-12-2014, 09:02 PM	#2
eek Zilvia FREAK! Join Date: Feb 2004 Location: California Age: 43 Posts: 1,025 Trader Rating: (29) Feedback Score: 29 reviews	You sure you lined up the hub correctly? Did you try rotating the quick release so its straight? Should have no issues lining up a NRG QR and Nardi wheel.

08-12-2014, 09:08 PM	#3
KoukiMonsta Nissanaholic! Join Date: Mar 2009 Location: NC Posts: 1,969 Trader Rating: (23) Feedback Score: 23 reviews	nardi and nrg definitely go together now fake ass nardi might just be another story..

08-12-2014, 09:30 PM	#4
slowvia Zilvia Junkie Join Date: Jun 2008 Location: OR Posts: 381 Trader Rating: (3) Feedback Score: 3 reviews	I had a similar issue. My Nardi wouldn't bolt onto my NRG hub. I found out that the hub I had had the bolt pattern for a Momo wheel. I found an adapter on eBay for cheap that fixed the issue.

08-12-2014, 10:17 PM	#5
eek Zilvia FREAK! Join Date: Feb 2004 Location: California Age: 43 Posts: 1,025 Trader Rating: (29) Feedback Score: 29 reviews	If its a NRG 2.0 or higher quick release it will fit ANY 6 bolt pattern steering wheel. That is why there are soo many holes on the quick release. If you are running JUST the NRG hub, then you will need an adapter since the NRG hub only accepts Momo pcd spacing.