|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
|
Thread Tools | Display Modes |
|
03-22-2019, 12:45 AM | #1 |
Zilvia FREAK!
Join Date: Sep 2011
Location: DTFullerton
Age: 33
Posts: 1,103
Trader Rating: (20)
Feedback Score: 20 reviews
|
What intake manifold is it? If it’s a greddy you will need to use a “series 2 “ fuel rail and injectors, the harness will need to be reworked for the “series 2” injectors you can use a q45 throttle body and again rewire to run the TPS on that tb. You will need the series 2 iacv also since that’s what it requires if you you have an neo 6 intake manifold it has a different iacv but they make a billet adapter so you don’t have to purchase another iacv and you can use the new 6 one.
Wiring specialties makes a harness to your liking and you can tell them what injectors you plan on using and what sensor plugs you will and will not have Oil cooler warmer sensor? Do you mean the oil cooler thermostat or the oil temp sensor Yes the evap can be deleted, BUT gas fumes need a vent. It’s pretty easy and there are many more detailed responds online deep in the infinite abyss that is zilvia
__________________
GO DUCKS!!!!!!!!! |
Sponsored Links |
Bookmarks |
Tags |
plumbing, rb25, s14, swap, wiring |
|
|