CT 400+whp Rb25 setup Garrett 3076R , 550CC Injectors, Syko RB25 swap elbow - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TeamMayhem · 10-14-2011, 09:24 AM

Hey guys, Im selling some parts i picked up with attentions of going RB25 again but i am going RB26. I baught them off a guy in long island. He had the setup on his car only making 401whp, as you know this turbo is capable of 500+ with better responce and spool up time than a 35r. He said he only put 4000 miles on the setup in his s14. I already sold the Power fc that came with the setup. This will bolt on to your stock log manifold. $1500 as a package. Seporate prices below. Reasonable offers accepted.

I prefer contact via text, call or PM. Your choice. 860-908-2668
I will check PM's and posts daily. -Ryan

In the pictures you can see the precision tag and see the part numbers. Its a Garrett 3076R Ball Bearing T3 flange .86 ex housing 4" intlet 2.5" outlet. I will include the braided oil and coolent lines that are AN fittings. (not shown in pictures) you will only have to use your stock oil drain. $1450 new $SOLD

Injectors are Deatchworks 550cc injectors in the rail. $350(nismo fpr not included)

Syko swap elbow W/second o2 bung, i have a plug if you need it. SOLD in US

10-14-2011, 09:24 AM	#1
TeamMayhem Join Date: Feb 2009 Location: USA Age: 35 Posts: 30 Trader Rating: (5) Feedback Score: 5 reviews	400+whp Rb25 setup Garrett 3076R , 550CC Injectors, Syko RB25 swap elbow Hey guys, Im selling some parts i picked up with attentions of going RB25 again but i am going RB26. I baught them off a guy in long island. He had the setup on his car only making 401whp, as you know this turbo is capable of 500+ with better responce and spool up time than a 35r. He said he only put 4000 miles on the setup in his s14. I already sold the Power fc that came with the setup. This will bolt on to your stock log manifold. $1500 as a package. Seporate prices below. Reasonable offers accepted. I prefer contact via text, call or PM. Your choice. 860-908-2668 I will check PM's and posts daily. -Ryan In the pictures you can see the precision tag and see the part numbers. Its a Garrett 3076R Ball Bearing T3 flange .86 ex housing 4" intlet 2.5" outlet. I will include the braided oil and coolent lines that are AN fittings. (not shown in pictures) you will only have to use your stock oil drain. $1450 new $SOLD Injectors are Deatchworks 550cc injectors in the rail. $350(nismo fpr not included) Syko swap elbow W/second o2 bung, i have a plug if you need it. SOLD in US Last edited by TeamMayhem; 01-04-2012 at 04:05 PM..