|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
04-12-2005, 10:22 PM | #1 |
Zilvia Member
|
z31 slave cylinder
I was cruising around another forum (midwest240sx.com) and saw that someone is using a z31 slave cylinder on their ka transmission. I've searched these forums and have found no topics on it. Apparently it is the same as the nismo slave cylinder. Anyways, has anyone had experience with this and were the results different from the stock 240 slave cylinder?
|
Sponsored Links |
04-12-2005, 11:51 PM | #2 |
I used it, didn't feel any difference really, but it works. Actually, the little bleed nozzle on it is on the top rather than on the bottom like on the 240sx slave, it's harder to bleed and a little harder to install.
I'll just stick w/ 240 slave from now on. |
|
04-13-2005, 07:53 AM | #3 |
Zilvia Junkie
|
I heard that it is the same as the Nismo one and put it on my sr tranny... Wasn't really difficult to bleed...wasn't difficult to install - and that was the first time I even knew what a slave cylinder was =P
I had to replace mine anyway - why not just go w/ the one that may be better? |
Bookmarks |
|
|