Installing rear quarter windows on zenki - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jisatsu · 02-16-2016, 04:20 PM

How hard is this as a DIY

LoSt180 · 02-17-2016, 10:55 AM

It's glued in. So you'd have to have a good razor-blade tool to cut it out, then have the proper adhesive to glue the new one back in.

If you've replaced a windshield, then this could be an easy DIY, if not it might be better to have a glass shop do it.

mixeds14 · 02-20-2016, 08:39 AM

The windows have some plastic guide pins glued on them from the factory also. Unless they were cut when the windows were removed. So lining them should be that hard.. just lined the pin with the hole in the body and adjust a bit and your golden

jisatsu · 02-23-2016, 11:50 AM

took it to shop. all done!

02-16-2016, 04:20 PM	#1
jisatsu Join Date: Feb 2010 Location: NC Age: 42 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	Installing rear quarter windows on zenki How hard is this as a DIY

02-17-2016, 10:55 AM	#2
LoSt180 Zilvia FREAK! Join Date: May 2013 Location: MD Posts: 1,049 Trader Rating: (18) Feedback Score: 18 reviews	It's glued in. So you'd have to have a good razor-blade tool to cut it out, then have the proper adhesive to glue the new one back in. If you've replaced a windshield, then this could be an easy DIY, if not it might be better to have a glass shop do it.

02-20-2016, 08:39 AM	#3
mixeds14 Leaky Injector Join Date: Jan 2010 Location: nc Posts: 71 Trader Rating: (2) Feedback Score: 2 reviews	The windows have some plastic guide pins glued on them from the factory also. Unless they were cut when the windows were removed. So lining them should be that hard.. just lined the pin with the hole in the body and adjust a bit and your golden

02-23-2016, 11:50 AM	#4
jisatsu Join Date: Feb 2010 Location: NC Age: 42 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	took it to shop. all done!