RS-Enthalpy DYNO-TUNING for $400!! WA STATE

[AJZax]

JULY 18th DYNO-TUNING

MESSAGE ME IF YOU'RE INTERESTED. I'll get you squared away with Martin and we can get to tuning asap!

RS-Enthalpy is flying from Florida to dyno-tune our cars. Dynotuning is going to be $400 base cost. Key features:
- $400 includes ECU AND dyno-tuning!
- Nissan&Infiniti Engine Management : SR, KA, VQ, VG, VH, CA, VK VR etc.!
-RB25s and RB20s are only $299 (I don't know why lol they just are)
- modified rev-cut to prevent lean condition on rev limiter
- 2 step launch control (optional)
- optional dual-mapping (multi-tune) --- additional $50
- Any fuel type. Pump, E85, race gas etc.
- RS-Enthalpy ECU is about as flexible as a Power-FC; believe it or not.

It'll be in Port Orchard, Washington. JULY 18th!!! I just need everyone coming to message me so I can coordinate the best day for everyone. Drivers, shop, and Enthalpy. OR you can call me at (360)-471-7757. Please call asap.

50% deposits required by the 5th of july.

Everyone who attends will have their car in the promo video shooting for the shop and for RS-Enthalpy promotional videos!
Media coverage credit of:
-Penumbra Productions
-ZMercy Films

EVENT PAGE: http://ajdrift.com/event/rs-enthalpy...nce=fcb4d159a7

[jamg]

this is a really good deal, if it comes with the ECU.

[Bambi]

Originally Posted by jamg

this is a really good deal, if it comes with the ECU.

Which it does so it is!

[TheRealSy90]

Awh I need my Enthalpy ecu tuned

[seagrasser]

subscribed for more info

[AJZax]

Dyno date had to be pushed back. I'm coordinating the event, and school finals are this week and rushing to get car done for april 7th open drift to try and get 5/8ths teched and pro-am fd lisence and coordinating with new sponsors etc. So plates over-flowing right now. Dyno date may be april 4th or the week after. Not positive yet. Sorry :/ I'll update as soon as dyno-date is solid again. It was solid, it's my fault it isn't now, ran into snags on my build. :/

Please inquire soon though if you're interested. If you already have the ECU, the dyno-tune will only be $150 I believe. I'll have to check with RS-Enthalpy. (same price as re-flash, just it'll be a dyno-tune flash )

And yes, dyno tune and ECU combo package!

Please inquire soon as we'll get you your rom-tune shipped to you first so you can test your setup so dyno-tuning goes smoother and there's less stuff and time consumption per car on dyno-tuning day. Please P.M. me if you're seriously interested!

Also if you need to pick up parts or upgrade injectors, hit up PassingLanePerformance and they'll hook you up. Tell them Aaron Mansfield sent you. Injectors, FiveO injectors are actually fine. I'll be running them for my build.

[khai01]

any update on the tuning date yet?

[AJZax]

Please message me and let me know ASAP if you're interested in this deal! We need to know how many ECUs to bring from Florida and how much dyno-time to allocate etc. We'll probably start dyno-tuning as early as it's legal to be loud.

As of now, Puget-Sound-Auto updated as APRIL 12th as their available date to hose a dyno-tuning event at their facility.
A driver is trying to get it pushed to APRIL 15th (we'll see what happens, I'm doing my best to accomodate everyone, but I also have to work with the companies and the media guys and all the drivers so it's tough)

RS-Enthalpy can install and tune their RS-Enthalpy ECUs, or they can dynotune
-AEM stand alone ECUs
-Apexi Power FC
-Nistune
-SAFC (I'd suggest replacing or adding the enthalpy ecu as SAFC is pretty limited)


$40 to get on the dyno and just do some pulls to see what your car puts down. (i tried to get it cheaper but facility owners want at least $40 a car for pulls)

[Johannes]

Don't pass on to this great deal fellow Northwest people! Dyno date has been moved to April 12th!

As AJZax said, $400 for ROM tuned ECU + Dyno tune!
$350 for Nistune re-tune!

[voiddweller]

Martin tuned my car two weeks ago and was able to produce 241whp with my stock T25 on 7lbs of boost. Amazing!

Here are my engine mods. E62 ROM Tuned ECU:

S13 Blacktop SR20DET
Rebuilt OEM T25
Greddy S13 VSPL FMIC
Enjuku WAI
DeatschWerks 550cc Fuel Injectors
S13 Koyo Racing Radiator
JWT Flywheel, Clutch and Pressure Plate
GReddy Water, Alternator and PS Pulleys (PS was disconnected for runs)
Driveshaft Shop Aluminum Driveshaft

He is worth every cent and a great guy. Sign up if you are on the fence. You will not be disappointed.

[idahotuner]

seriously, fuck, i need to trailer my car over and see if the den tune could help me out

[Johannes]

Originally Posted by idahotuner

seriously, fuck, i need to trailer my car over and see if the den tune could help me out

Rent one from U-haul for a day! Is the car non-running because you need a tune?

[gostrider]

I will be bringing my car to tampa on a uhaul when i get my injectors and maf installed..

[AJZax]

Dyno-tuning is over!

HOWEVER! Due to interest we are pooling people for another dyno-tuning session in july-august time frame. Please contact me so I can answer any questions and put you in touch with RS-Enthalpy and get you all squared away! The more people we get comitted the better, as then we can garuntee him coming up. We'll have to charge roughly $450 for dyno-tuning as the shop is charging us for dyno-use.

We had a stock s13 SR (red top) (FMIC and turbo-back) hit 260whp. stock pump, injectors and turbo(t25)!

[AJZax]

If you want RS-Enthalpy dyno-tuning from Martin himself up here in WA state, just message me! We'll get you squared away! Interest is even higher this time!

TIMEFRAME is in the air, have to coordinate between dyno-shop, enthalpy, and all the drivers. lol
Target: Mid-july ish (not pro-am round 4/pro rd 5, I'm going to that lol)

Notable outputs on the dyno as of last session:
---Stock SR - t25, 370cc injectors, cxracing fmic, and unknown turbo-back with muffler 260whp (forgot psi)
---Stock bottom SR - ISIS 3871, beat up ebay fmic, turbo back (with muffler) , poncams, 550cc inj, 298whp 14psi (plenty more to go)
---Stock bottom KA24DE (NA) - stage 2 BC cams, ebay exhaust and intake 155whp


Price is $400 if you don't have enthalpy ECU, that includes dyno-tuning.
HOWEVER, we have to pay the shop to per car for using their dyno. It's $80 a car. I'm TRYING to get it lowered... :/
Still $480 is normally what you pay for a dyno-tune from a local shop with less than half the experience of martin lol, and it includes the ECU in the price. He also dyno-tunes AEM, vipec, power-fc, nistune etc.

If you have any questions, I can probably answer them. If for some reason I can't... then I will put you in touch with martin, who will definitely be able to

ALSO If you are getting an enthalpy dyno-tune with us, and you have to get a couple more parts and you're tight on budget, let me know and I'll see what I can do about getting you a hook up from passing-lane-performance or enjuku racing.

See you all there!

[AJZax]

RS-ENTHALPY DYNO TUNING

JULY 18th

Puget Sound Auto Repair, Port Orchard, WA.

$60- $80 hook up fee, depending on head count.

Please call me asap to setup your 50% deposit by the 5th of July.
We need this to cover our costs of doing this.
3604717757
I'll immediately put you in touch with martin (owner/tuner of RS-Enthalpy) to get you squared away.

Thanks!

[l2u4k0assx]

This kind of awesome stuff always happens when I am not around. I wont be back till Octish.

[white_lightning240]

I was told that they might be in Portland in December? Is that correct? Will re flashing be available? Thank you

[AJZax]

As far as I know martin from RS-Enthalpy does not have any scheduled tuning in portland.

We are doing another October 10th, same location.

Please like my facebook to get a hold of me: facebook.com/ajdrift
And message me on there. I don't check my P.M.s here often enough.

Please contact me asap if you want to get onboard for this one, so I can allot dyno-time for you.

[AJZax]

One more bump!
October 10th!
Dyno tuning!
Another session also coming in december!
Get on board asap before we run out of dyno time-slots!

Hit me up ASAP!

[AJZax]

dynotuning tomorrow!
you we can still get like one person in. just add me on facebook and contact me. or contact me through my website.

www.facebook.com/ajdrift
www.ajdrift.com

December is going to be the next session, however it's pretty much full.