|
Chat General Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
12-08-2012, 12:44 PM | #1 |
Zilvia Addict
|
Jdm s14 Kouki wing install question
Hey guys. Just picked up an oem kouki wing. Came with 2 bolts (one on each side)
The 2 bolts line up perfect on the holes from the se wing. I need to cover the other 2 up. But do I just 3m double Side tape the rest? Or how did you guys do it? Thanks In advance |
Sponsored Links |
12-09-2012, 11:34 AM | #4 |
Zilvia Addict
|
|
12-09-2012, 12:56 PM | #6 |
Zilvia Addict
|
I used double sided tape on the front bottom portion of the kouki wing. Then used two nuts for the two bolts. I tightened the nuts pretty good. Haven't had any problems yet.
|
12-09-2012, 03:56 PM | #8 |
Zilvia Addict
|
Okay thanks guys.
I only have one bolt on each side. Which lines perfect with the holes from the se wing. I was just trying to make sure the double side tape would do the job too.. I don't want almost $300 bucks flying out on the free way! Lol |
12-09-2012, 05:41 PM | #9 | |
Future Moderator
Join Date: Jun 2007
Location: Places
Age: 36
Posts: 12,900
Trader Rating: (17)
Feedback Score: 17 reviews
|
Use the holes and double tape.
__________________
Quote:
|
|
12-10-2012, 02:52 AM | #12 |
Leaky Injector
Join Date: Sep 2010
Location: San jose
Age: 34
Posts: 103
Trader Rating: (1)
Feedback Score: 1 reviews
|
yessir, 3m does wonders. i had one bolt on each side as well...double sided taped that bietch and it held for a few years no problem....i actually used 3m double sided tape to mount my front plate on my dmax bumper before i wanted to drill holes...i kid you not, even through rain season it stuck on for 6 months...lool
|
12-10-2012, 03:13 AM | #13 | |
Post Whore!
Join Date: Nov 2004
Location: Los Angeles
Age: 38
Posts: 4,565
Trader Rating: (53)
Feedback Score: 53 reviews
|
Quote:
|
|
11-09-2013, 12:56 PM | #14 |
Join Date: Apr 2012
Location: Long Beach CA
Age: 32
Posts: 35
Trader Rating: (0)
Feedback Score: 0 reviews
|
how many pounds 3m double sided tape am i supposed to use? i bought 3m scotch double sided tape from home depot that holds up to 20 pounds and the tape is still coming off
|
11-09-2013, 01:20 PM | #15 |
Post Whore!
Join Date: Aug 2002
Location: Fremont, CA
Posts: 4,937
Trader Rating: (12)
Feedback Score: 12 reviews
|
make sure to clean the mounting surfaces well (top of trunk and bottom of wing) before applying tape. if it's full of dirt, it will just stick to the dirt and not the wing/trunk.
|
11-11-2013, 05:44 AM | #16 |
Leaky Injector
Join Date: Nov 2011
Location: London
Age: 34
Posts: 143
Trader Rating: (1)
Feedback Score: 1 reviews
|
Heres what i did dude. drilled holes and used some 3m tape! still on perfect!
The first step was to make a template of the base plate: Then placed the templates on the boot measuring both sides to make sure if would fit perfectly in the middle. Uploaded with ImageShack.us and then the drilling began, started off by doing 8mm holes then 10mm...took a bit of fiddling around but managed to get it sitting perfectly on the boot. Secured it using 2 bolts and covered the base plates with some double-sided sticky tape. Here is the finished result which I am very pleased with and love the wing |
Bookmarks |
|
|