240sx z32 brake swap, need help please

[afishysilvia]

Use R33 brake cables, SS lines for calipers.
Some even make the Z32 stock lines work with some modifications.

Not sure for S13 but my S14 knuckles worked just fine, didn’t need z32 knuckles

Your bible:

https://importnut.net/300zxbrakeswap.htm

[Loganoski]

Originally Posted by afishysilvia

Use R33 brake cables, SS lines for calipers.
Some even make the Z32 stock lines work with some modifications.

Not sure for S13 but my S14 knuckles worked just fine, didn’t need z32 knuckles

Your bible:

https://importnut.net/300zxbrakeswap.htm

thanks for the help, and ive read over that swap link just confused me alittle, they removed the knuckles but ive seen people who didn't so i may just be confused with it all

[afishysilvia]

Originally Posted by Loganoski

thanks for the help, and ive read over that swap link just confused me alittle, they removed the knuckles but ive seen people who didn't so i may just be confused with it all

I’ve seen it both ways, if you have the right tools you can turn the axles and have access to the bolts that hold the hubs. Don’t confuse knuckles with the hubs. I never removed the knuckles, but you will need to unbolt the hubs to install the adapters and z32 dust shields.

[Loganoski]

Originally Posted by afishysilvia

I’ve seen it both ways, if you have the right tools you can turn the axles and have access to the bolts that hold the hubs. Don’t confuse knuckles with the hubs. I never removed the knuckles, but you will need to unbolt the hubs to install the adapters and z32 dust shields.

The hub seems easy to change, there’s just some YouTube vids where they fully takeout the knuckle and Even cut a part of it off for clesrance I just never knew why