Am I retarded? Rb25 into s13 nightmares

[slideslidegnarslide]

So quick back story. I had this set up in an s14. Now im putting it into an s13

rb25

r33 mounts

r33 subframe

25 transmission.

sooooo

i dropped the motor in and the trans crossmember sits to far back(The member is about 2 inches further back than the holes in the chassis) . it will not line up with the holes in the chassis.

I have tried a manual ka and an auto ka

i bought the auto ka one of a guy here who swore to me it was the crossmember i needed.

can any one shed some light on this?

i can supply pictures if this is too confusing. But the motor sits in the bay the way it should. I just dont get it.

What do i need. Or should i just build a trans member and forget about it.(thats very doable) I just want to make sure something isnt wrong.

[slideslidegnarslide]

This is my retardation. You can even see the A stamp in the picture. I was told the auto guy would work. but i knew it wouldn't by the pictures the guy sent me. but he assured me it was the right one.

oh well. what do i need? or just build one and move on?

[PrimeDirective]

You need adapter blocks. Syko makes them. I'm not sure how you had it in your S14 with out them...

[slideslidegnarslide]

i do have them! thats what im forgetting. sorry the car has been apart for 2 years. I will see if it works then update. thanks man.

[fliprayzin240sx]

Another thing that works too is an auto R33 transmission mount bracket. Thats what a couple of guys I know, used in Japan.

[slideslidegnarslide]

I got it I forgot I had the extenders from the mount kit. Haha it's just been a long time sing this cars been together