Xo2 Racing Turbo Blankets T3/T4/T6 BLOW OUT!!!!!

[xo2racing]

We have only 3 different size turbo blankets and a limited amount of them so act fast!



PM ME or Call Us @ 626-582-8566 Ask for ABE and Mention Zilvia for this Price!

The Specs are as follows:

- 1" Ceramic Insulation Rated at 2000 Degrees F.
- Stainless Steel Knitted Wire Mesh Inner Liner.
- Stainless Steel Capstan Rivets.
- Stainless Steel Lacing Wire Fastening system


When ordering be sure to put the Part # for the different sizes as follows:

Part # EW-TBT3: Fits any T25, T28, T3 Like Garrett GT25, GT28, GT30, GT32, GT35, GT37

These are $55 for pick-up & $66 Shipped




Part # EW-TBT4:Fits any T3, T4 Like Garrett GT30, GT32, GT35, GT37, GT40, GT42, GT47, GT55

These are $60 for pick-up & $70 Shipped




Part # EW-TBT6: Fits any T5 or T6 turbochargers. Like Garrett GT42, GT45, GT47, GT50, GT55, GT60

These are $70 for pick-up & $80 Shipped

[ross.cottrill]

what will fit a t4 twinscroll .94 ar?please pm me,thanx..

[Chue240sx]

any black ones? I'm assuming the part # EW-TBT4 should fit my holset hy35 with a 9cm exhaust housing. let me know.

[Nimso]

Originally Posted by Chue240sx

any black ones? I'm assuming the part # EW-TBT4 should fit my holset hy35 with a 9cm exhaust housing. let me know.

i have the exact same question, black and the fitment of the holset hy35

thanks!

[Buriantsu]

Cheaper than eBay not bad.

[mikeroy420]

I'm interested in the EW-TBT3 if it fits my GT2871R. If so, can you pm a price shipped to Nova Scotia Canada, B0J 1H0.

Thanks

[stricnynel0s]

i have one for a t4 and it does not fit my hx35 right i think i need one for a t3 but placement of turbo is odd, wastegate runner hits part of blanket

[xo2racing]

Originally Posted by Chue240sx

any black ones? I'm assuming the part # EW-TBT4 should fit my holset hy35 with a 9cm exhaust housing. let me know.

I only have grey, sorry guys.

And as for fitment, the turbos i listed above are the ones i actually test fitted them on.

If your turbo is similar to the ones i posted then it should fit with no problem.

I don't want to tell someone that it would fit their specific turbo when i don't know 100%.


So its up to you to make the decision whether this is for you or not, just to avoid any problems in the future i don't want to tell people which one to get.


On a side note: i have only 6 left EW-TBT3. So these are going fast!

[xo2racing]

Bump! Bump!!!!!