WA Complete turn key built RB25 swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

PovertyDrifter · 04-19-2015, 12:43 PM

Long story short I had some idiot plow into me on the wrong side of the road while pulling out of my driveway. LR quarter panel got munched pretty good and insurance claimed total loss.

This is not for the complete car just for the engine trans ECU ETC to bolt into your S13. Every thing is still in the car and drivable. I have no plans on removing anything until someone has driven in it with me and is ready to buy. I am not going to ship or part anything out.

Series 2 R33 rb25det engine/transmission
AEM EMS series 2 rb25 tuned at 19lbs of boost
Wiring specialties rb25 s13 harness
Map sensor
Walboro fuel pump
ISIS intake
Custom intercooler and piping
Billet Precision 6266 turbo
CXracing turbo manifold
ARP Head studs
Nissan OEM exhaust manifold studs
Custom built 3" Stainless steel down pipe
Custom built Screamer Pipe
Deatchworks 740cc injectors
Turbonetics Wastegate
Genuine TIAL blow off valve
ACT 6 Puck clutch
Redline light weight shock proof gear oil
Redline 15-50 engine oil
ISIS short throw
ACT 6 Puck
1 piece drive line
Mounts

If you have questions about anything else that might go with it just ask. Asking $10,000

I might have some of the factory parts that I can include but will have to go through my storage to verify. Injectors and stuff like that.

04-19-2015, 12:43 PM	#1
PovertyDrifter Join Date: Aug 2013 Location: Spokane, WA Age: 38 Posts: 43 Trader Rating: (2) Feedback Score: 2 reviews	Complete turn key built RB25 swap Long story short I had some idiot plow into me on the wrong side of the road while pulling out of my driveway. LR quarter panel got munched pretty good and insurance claimed total loss. This is not for the complete car just for the engine trans ECU ETC to bolt into your S13. Every thing is still in the car and drivable. I have no plans on removing anything until someone has driven in it with me and is ready to buy. I am not going to ship or part anything out. Series 2 R33 rb25det engine/transmission AEM EMS series 2 rb25 tuned at 19lbs of boost Wiring specialties rb25 s13 harness Map sensor Walboro fuel pump ISIS intake Custom intercooler and piping Billet Precision 6266 turbo CXracing turbo manifold ARP Head studs Nissan OEM exhaust manifold studs Custom built 3" Stainless steel down pipe Custom built Screamer Pipe Deatchworks 740cc injectors Turbonetics Wastegate Genuine TIAL blow off valve ACT 6 Puck clutch Redline light weight shock proof gear oil Redline 15-50 engine oil ISIS short throw ACT 6 Puck 1 piece drive line Mounts If you have questions about anything else that might go with it just ask. Asking $10,000 I might have some of the factory parts that I can include but will have to go through my storage to verify. Injectors and stuff like that.