Sr20det ARP Main Stud Triming question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

95s14h · 02-05-2012, 01:19 PM

Hey guys im currently building my s15 sr and have seen that two of the arp main studs need to be service to clear the upper oil pan. My question is if anyone has any measurements of approximetly how much needs to be taken off of them?

harrypotter · 02-05-2012, 02:25 PM

I have never used ARP and never will. You should not have to trim new parts! Total bs, but good luck!

jr_ss · 02-05-2012, 03:45 PM

Quote:

Originally Posted by harrypotter

I have never used ARP and never will. You should not have to trim new parts! Total bs, but good luck!

That's a completely BS line... ARP makes great items, so what if you have to mill an 1/8" off two studs. Yeah it sucks but it's not the end of the world.

OP, and 1/8" should give you the clearance you seek.

95s14h · 02-05-2012, 09:21 PM

Quote:

Originally Posted by jr_ss

That's a completely BS line... ARP makes great items, so what if you have to mill an 1/8" off two studs. Yeah it sucks but it's not the end of the world.

OP, and 1/8" should give you the clearance you seek.

Thank You sir!

harrypotter · 02-05-2012, 09:55 PM

Quote:

Originally Posted by jr_ss

That's a completely BS line... ARP makes great items, so what if you have to mill an 1/8" off two studs. Yeah it sucks but it's not the end of the world.

OP, and 1/8" should give you the clearance you seek.

Yeah so great you have to modify new items to work, solid!

jr_ss · 02-05-2012, 10:41 PM

Quote:

Originally Posted by harrypotter

Yeah so great you have to modify new items to work, solid!

They were designed to work on the FWD SR's, they just so happen to work with every SR motor. FWD SR's have a different upper sump pan that don't need additional clearance to run the ARP mains. If you don't want to mill the studs, drill holes in the upper pan and have plate welded over the holes. That'll give you the clearance needed as well. Like I said, not the end of the world.

Pinggg · 02-06-2012, 07:43 AM

anybody have picture of the studs trimmed? and also which ones? sorry

harrypotter · 02-06-2012, 08:40 AM

Quote:

Originally Posted by Pinggg

anybody have picture of the studs trimmed? and also which ones? sorry

http://zilvia.net/f/engine-tech/3983...-wtf-pics.html

See also:
http://zilvia.net/f/tech-talk/103688...-disaster.html

Notch_Javi · 08-04-2023, 12:53 AM

Thread still alive ??

kanyedian · 08-04-2023, 10:27 AM

Quote:

Originally Posted by notch_javi

thread still alive ??

n0pe
<__<

*anti tyler* · 08-04-2023, 09:32 PM

Quote:

Originally Posted by Notch_Javi

Thread still alive ??

idk, can you tell?

02-05-2012, 01:19 PM	#1
95s14h Join Date: Nov 2010 Location: Houston Tx Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	Sr20det ARP Main Stud Triming question Hey guys im currently building my s15 sr and have seen that two of the arp main studs need to be service to clear the upper oil pan. My question is if anyone has any measurements of approximetly how much needs to be taken off of them?

02-05-2012, 02:25 PM	#2
harrypotter Zilvia Addict Join Date: Jun 2010 Location: Panama City FL Posts: 622 Trader Rating: (19) Feedback Score: 19 reviews	I have never used ARP and never will. You should not have to trim new parts! Total bs, but good luck! __________________

02-06-2012, 07:43 AM	#7
Pinggg Zilvia FREAK! Join Date: Dec 2010 Location: Coconut Creek, Florida Age: 30 Posts: 1,255 Trader Rating: (22) Feedback Score: 22 reviews	anybody have picture of the studs trimmed? and also which ones? sorry

08-04-2023, 12:53 AM	#9
Notch_Javi Join Date: May 2020 Location: Florida Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Thread still alive ??