Can S13 crossmembers shift side to side? One of my wheels are sticking out

[s13q]

Urgh, got an annoying problem.

One wheel looks like its got a spacer on it, sticks out further out.

I changed the LCAs and no difference. I checked the steering arms, coils, caster and all is fine.

Some alignment guy told me he needs to "adjust the crossmember" and knock it a bit to the other side to even things out.

Any ideas?

[Moore]

The cross member just line's up to studs. There's clearance but not enough to make a noticeable look like one side would have a spacer on. Car ever been in an accident?

[Bleakley]

Front or Rear? Pictures?
Offset/size of rims different?

[fliprayzin240sx]

S13s are notorious for that. Could have been wrecked before and frame is tweaked.

[driftminds13]

Also, if your chassis harness (under driver fender) has been relocated up more to accommodate big wheels/tires and lowness your fender will bulge out more than the pass side making it look like one wheel is sunken in more.

Could also be a tweak in the front end like ^he said.

[Signition]

Originally Posted by driftminds13

Also, if your chassis harness (under driver fender) has been relocated up more to accommodate big wheels/tires and lowness your fender will bulge out more than the pass side making it look like one wheel is sunken in more.

Could also be a tweak in the front end like ^he said.

Exactly what happened to my fenders when i tucked the harness up.

[s13q]

Hey guys.

I did have a minor accident and I think you guys are right!

The front of the guard was hit so I think its been kinked in making the wheel more sunken in.

Its weird I never noticed until you guys mentioned it. I have a spare guard at home that needs painting but man those fenders are sooo flimsy lol.

Thanks for your input lads!

[gazingelec]

good info,S13s are notorious for that. Could have been wrecked before and frame is tweaked.thanks