|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
|
03-03-2018, 06:12 PM | #1 |
Zilvia Junkie
Join Date: Nov 2012
Location: wisconsin
Age: 32
Posts: 448
Trader Rating: (7)
Feedback Score: 7 reviews
|
tie rod spacers & Villains tie rod ends
Anyone have any insight on the quality of villains parts? mainly the inner tie rods and outer tie rod ends?
trying to get more angle and don't know if I should go with villains inners, megan inner, isr inners (all three have built in spacers for more angle) or just go with rack spacers
__________________
The Game you lose haha |
Sponsored Links |
03-03-2018, 06:36 PM | #2 | |
Zilvia Junkie
Join Date: Nov 2016
Location: Los Angeles
Age: 33
Posts: 489
Trader Rating: (3)
Feedback Score: 3 reviews
|
Quote:
Can’t say I’ve had any experience with villains tie rods, but I am currently running isr inner and outer with the spacer and they have held up quiet well. Tracked a few times. I’ve extended my LCA and the inners have decent length for adjustment. But I believe if you have crazy extended LCA you prob wanna go with maxima inners if I’m not mistaken Sent from my iPhone using Tapatalk |
|
03-03-2018, 11:31 PM | #3 |
Zilvia FREAK!
Join Date: Jun 2010
Location: Toronto, ON
Age: 36
Posts: 1,182
Trader Rating: (0)
Feedback Score: 0 reviews
|
I agree that built-in spacers are better than the rings.
Of those 3 brands, I'd probably choose Megan. I had a set of their TC Rods, and the joints on them were perfect even after 5 years of dailying and tracking. So I'd assume the joint on their inner (only part that can really wear out) is of the same quality. Have you considered a bolt-on rack spacer? That would give you the extra travel without sacrificing thread engagement. I ran one for that exact reason before upgrading to knuckles. |
03-05-2018, 07:51 AM | #4 |
Zilvia Junkie
Join Date: Nov 2012
Location: wisconsin
Age: 32
Posts: 448
Trader Rating: (7)
Feedback Score: 7 reviews
|
Ive got an S13 and everyones saying im going to have to cut the new tie rods since stock is 11inches and the aftermarket rods with spacers are 13 inches
__________________
The Game you lose haha |
Bookmarks |
|
|