CA Fastrax DIY Alignment Tool - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NINJASPY · 05-24-2011, 11:12 AM

solddddddd

Mitsubayati · 05-24-2011, 11:30 AM

Are there instructions for its use?

NINJASPY · 05-24-2011, 11:33 AM

yes I have the instructions, or look on you tube.

Coolwhip · 05-24-2011, 12:47 PM

great tool to have, we use one at the track all the time... free bump!

240sxvaj · 05-24-2011, 01:30 PM

I wanna see if this thing is accurate.......

NINJASPY · 05-24-2011, 01:49 PM

its accurate if you use the tool correctly, mount it on the wheel the same way on each wheel, AND have a flat ground which to zero in the gauge. If you are looking to get perfect alignment to the .1 degree, then you should go to a computerized alignment shop. There is a reason why hunter machines cost 20+k.

If you are at the track and need to adjust alignment and have them equal on both sides, then this tool will work.

IE, its a good way to add or take out camber/toe and have them equalized on both sides.

Even alignment shops get it wrong. Most (99%+) do alignment with you outside of the car, 150-200lbs sitting in the drivers seat will mess up the alignment, no matter how you look at it.

You are welcome to come test it out if you want to see how accurate it is. Or just look on youtube.

NMs14.5kouki · 05-24-2011, 01:51 PM

how much for it shipped to 87144?

stinky_180 · 05-24-2011, 02:12 PM

I own and use this exact same tool and it works well! Best results if your on a FLAT and EQUAL surface.

!Zar! · 05-24-2011, 02:31 PM

Mmm, nice price and nice to have...

GSXRJJordan · 05-24-2011, 02:36 PM

I'll take it. Sending you PM now.

05-24-2011, 11:12 AM	#1
NINJASPY Zilvia FREAK! Join Date: Oct 2007 Location: So-cal Los Angeles 626 Age: 43 Posts: 1,009 Trader Rating: (13) Feedback Score: 13 reviews	Fastrax DIY Alignment Tool solddddddd Last edited by NINJASPY; 05-24-2011 at 10:57 PM..

05-24-2011, 11:30 AM	#2
Mitsubayati Zilvia FREAK! Join Date: Aug 2007 Location: The Dro Posts: 1,424 Trader Rating: (18) Feedback Score: 18 reviews	Are there instructions for its use? __________________

05-24-2011, 12:47 PM	#4
Coolwhip Zilvia Junkie Join Date: Oct 2003 Location: Florida Posts: 497 Trader Rating: (1) Feedback Score: 1 reviews	great tool to have, we use one at the track all the time... free bump! __________________ Raw Brokerage - New & Used RB20/RB25/RB26/RB30 Parts Ricky @ RawBrokerage.com

05-24-2011, 02:12 PM	#8
stinky_180 Nissanaholic! Join Date: May 2004 Location: Pale Blue Dot Age: 39 Posts: 2,064 Trader Rating: (26) Feedback Score: 26 reviews	I own and use this exact same tool and it works well! Best results if your on a FLAT and EQUAL surface. __________________ SoCal RallyX Coverage and MTB Ride Reports WheelsDirty

05-24-2011, 02:31 PM	#9
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	Mmm, nice price and nice to have... __________________

05-24-2011, 11:33 AM	#3
NINJASPY Zilvia FREAK! Join Date: Oct 2007 Location: So-cal Los Angeles 626 Age: 43 Posts: 1,009 Trader Rating: (13) Feedback Score: 13 reviews	yes I have the instructions, or look on you tube.

05-24-2011, 01:30 PM	#5
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 34 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	I wanna see if this thing is accurate.......

05-24-2011, 01:49 PM	#6
NINJASPY Zilvia FREAK! Join Date: Oct 2007 Location: So-cal Los Angeles 626 Age: 43 Posts: 1,009 Trader Rating: (13) Feedback Score: 13 reviews	its accurate if you use the tool correctly, mount it on the wheel the same way on each wheel, AND have a flat ground which to zero in the gauge. If you are looking to get perfect alignment to the .1 degree, then you should go to a computerized alignment shop. There is a reason why hunter machines cost 20+k. If you are at the track and need to adjust alignment and have them equal on both sides, then this tool will work. IE, its a good way to add or take out camber/toe and have them equalized on both sides. Even alignment shops get it wrong. Most (99%+) do alignment with you outside of the car, 150-200lbs sitting in the drivers seat will mess up the alignment, no matter how you look at it. You are welcome to come test it out if you want to see how accurate it is. Or just look on youtube.

05-24-2011, 01:51 PM	#7
NMs14.5kouki Zilvia Addict Join Date: Apr 2009 Location: Everywhere Age: 35 Posts: 654 Trader Rating: (38) Feedback Score: 38 reviews	how much for it shipped to 87144?

05-24-2011, 02:36 PM	#10
GSXRJJordan Post Whore! Join Date: May 2006 Location: San Diego, CA Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	I'll take it. Sending you PM now. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com