Tps ... Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

assk.88 · 10-14-2011, 05:26 PM

can you adjust the tps while the throttle body is off the car ?

thanks

ultimateirving · 10-14-2011, 06:24 PM

Quote:

Originally Posted by assk.88

can you adjust the tps while the throttle body is off the car ?

thanks

yeah but u need to plug it into the harnesss to get the proper voltage readings. You also need to make sure when u install the TB that the throttle linkage cable is not pulling on it. Ideally u want to adj with it on the car so it stays put. But u can set it without technically being installed.

assk.88 · 10-14-2011, 06:28 PM

awesome ... thanks ... and it should be at .5 and wot 4.5 ... do you happen to know what plug goes where ... theres a black and a brown plug

thanks

ultimateirving · 10-14-2011, 06:33 PM

in my sr, only one plug fits, i think its brown? yeah .45 -.50 is within spec.

assk.88 · 10-14-2011, 07:02 PM

thanks ... so i was replacing my knock sensor too and just got it off and noticed one wire was cut plugging into the knock sensor ... err guess im gonna have to try and find a pig tail tom ...

10-14-2011, 05:26 PM	#1
assk.88 Join Date: Aug 2011 Location: Greenville, SC Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	Tps ... Help can you adjust the tps while the throttle body is off the car ? thanks

10-14-2011, 06:33 PM	#4
ultimateirving Zilvia FREAK! Join Date: Nov 2010 Location: arizona Age: 36 Posts: 1,521 Trader Rating: (1) Feedback Score: 1 reviews	in my sr, only one plug fits, i think its brown? yeah .45 -.50 is within spec. __________________ Z32 with lq4 swap Desert Street Scene \|\| Dssevents.com

10-14-2011, 06:28 PM	#3
assk.88 Join Date: Aug 2011 Location: Greenville, SC Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	awesome ... thanks ... and it should be at .5 and wot 4.5 ... do you happen to know what plug goes where ... theres a black and a brown plug thanks

10-14-2011, 07:02 PM	#5
assk.88 Join Date: Aug 2011 Location: Greenville, SC Posts: 21 Trader Rating: (0) Feedback Score: 0 reviews	thanks ... so i was replacing my knock sensor too and just got it off and noticed one wire was cut plugging into the knock sensor ... err guess im gonna have to try and find a pig tail tom ...