Small Questions Thread (SEARCH FIRST! Use this instead of making NEW threads)

[Nissanshawn]

I was told I can download different tunes for my APEXi Power FC on Zilvia but i'm not searching the right keywords or something. It will not include FC in the search so it ends up searching all post that has the word Power or Apexi. I also searched with the words: tune, map, maps, sr20det, standalone, stand, alone, help, air/fuel, air, fuel and a couple other words. I just didnt see any downloadable maps. Can you please help me find these?

[justcallmecuz]

Anyone know if you can get this connector anywhere?

[dmragecm]

Anyone know where I can buy an aftermarket head unit that has the volume knob on the right side? Sounds kind of silly but the car is rhd and oem has it on the right. I know most aftermarket head units have remote controls too but I like subtle details like that plus it's an easier reach.

[04BlueBeach]

I'm wanting to do a small rebuild on My KA24DE including Gaskets, Rings, and bearings. My cars burning and leaking lots of oil and I'm pretty sure its burning because of a ring. My question is, would it be recommended to replace anything else? Also what are some reliable brands? I'm not wanting to do a Full rebuild because I don't have a lot of money and I'm just trying to get her running right again. Sorry in advance if its already answered because I know it probably has!

[DriftingBrandon]

Question: Can you post a private thread or draft thread? I want to start making my build thread. I don't want to publish it yet, considering I'm 1% complete.

[livelovesole]

Originally Posted by livelovesole

What size nut do I buy for an oem type x bumper where it connects to the fender? Bumper came with with no nuts and my current pignose only has about 5 and i want to do this properly. Thanks.

Help a brother out with this !

[Grocery Cart]

Does anyone know the size of the four hoses for the PCV tube that connects to the underside of each intake runner on the upper portion of the manifold? Part number is 11826-S13003. I'm at work right now and would like to get everything I need before taking the intake off to save a trip.

[juhd]

whats the difference between a stock s13 and s14 SR turbo manifold?

[acslater9]

Hey guys I have a 97' 240sx and today I started up the car getting it all warmed up. So I decided to turn on my lights. Worked fine but 5 minutes later headlights and taillights when out. Lows beams do not work for some reason but high beams do work, as well as my brake lights. Also my turn signals work as well. It is very weird.

I do not think it's the headlight bulb because my entire headlight unit is brand new from Nissan.

Any help is appreciated, thank you.

Any suggestions.

[trentjsd]

Has anyone seen or used the frontline tuning rocket bunny s13 kit for the coupe? If so how was the fitment?
website-http://finelinetuning.bigcartel.com/product/rocket-bunny-s13-kit-coupe-replica

[dorkidori_s13]

Originally Posted by livelovesole

Help a brother out with this !

take one of the OEM nuts over to Lowes or HomeDepot with you, go to their nuts and bolts aisle and go find one that matches. its a 10mm machine thread nut.

[zfortune]

Will 18x8.5 +38 fit on stock s13? Well I have tein h-tech springs but other than that it's all stock.

[ryandriftingfat]

Anyone have the link to the site that allowed you to do the 3d mockups of like S13's, R32's, A31's, etc?

I thought it was like xracer or vracer or something, but I can't remember.

[XMcEvilson]

is this the right thing I need?:

http://www.amazon.com/Infiniti-Nissa.../dp/B008MAOX7Q

[acslater9]

zilvia.net/f/showthread.php?t=594502

[chiboy002]

does the ka24de altima lower timing cover fit the s13 ka24de?

i want to change oil pumps/covers with beck&arnley and they only have altima ones... oem is discontinued.

i know upper cover and valve cover dont fit but what about lower?

[iStayBroke]

Originally Posted by ryandriftingfat

Anyone have the link to the site that allowed you to do the 3d mockups of like S13's, R32's, A31's, etc?

I thought it was like xracer or vracer or something, but I can't remember.

http://3dtuning.stuner.net/

[teh smithers]

Removing the valve cover on my S14 SR. The nut in the back right corner is too tight, causing the whole stud to spin. I know these studs are fragile (I already snapped one). Any bright ideas on how I can get the nut off?

[OutlawLui]

Help
I need to replace this An fitting. Its leaking coolant on my s13 stock red top. its like the ones that come with the isis turbo lines.


Is this a 6an female to some kind of npt male?

[Kaiba]

What's the difference between an OEM gtr grill vs. an aftermarket?

[I'm Redline]

Originally Posted by teh smithers

Removing the valve cover on my S14 SR. The nut in the back right corner is too tight, causing the whole stud to spin. I know these studs are fragile (I already snapped one). Any bright ideas on how I can get the nut off?

Try in this order:

Marvel Mystery Oil
Kroil

Note the names of these two products that penetrate old hardware or clean your tools for storage.

These ARE NOT WD40 and PB Blaster(These SUCK, don't pay for them...PB Blaster is garbage, WD40 is for cleaning tar and brake dust off your car)

[xGoggles88x]

Question: I would like for people who had purchase and install the maverick motorsport dual caliper set for there s13. I'm having issues with two bolts that are not fitting due to hitting the rear spindles. Do I have to grind down those parts on the spindle the make them fit or am I doing something wrong? Any help or installation guides would be appreciate.

[az_240]

^Hit up username george. He's the one that sells those.

[dmragecm]

Can anyone please identify what that black box is? Can it be removed with a straight tube?

[Too Fawty]

I need to find this part number! Please help. I've been searching but no results nor can I find it on the Nissan parts catalog. Its the switch cover to the right of the rear windshield wiper switches.

[krazy13]

Oh car gods please help. I am driving my s13 stock ride height with tokico blue shocks with oem springs no other mods except an aem cold air intake. I turn on a long sweeping interchange on my way to school and suddenly my car jerk over steers into the turn. I just replaced the tie rod end and got it an alignment but the problem persists. Suggestions? Have I missed something? I already have an isis alignment kit on the way to help things in the back as I have a bent lca but I don't think that would cause this issue.

[krazy13]

Too Fawty... Look up body electrical section switch (251) part number 25910 safety hazard switch. That help?

[I'm Redline]

Originally Posted by krazy13

Oh car gods please help. I am driving my s13 stock ride height with tokico blue shocks with oem springs no other mods except an aem cold air intake. I turn on a long sweeping interchange on my way to school and suddenly my car jerk over steers into the turn. I just replaced the tie rod end and got it an alignment but the problem persists. Suggestions? Have I missed something? I already have an isis alignment kit on the way to help things in the back as I have a bent lca but I don't think that would cause this issue.

Check the condition of your steering stops. These are tabs that stop the steering angle from going beyond the stock specs(these get heated and moved for drifting), check ALL your front steering and suspension hardware. That bent LCA, at a certain speed may just say it's stepping out...slow down

When you get your control arm kit, mount it all up, and set lines in your garage to get a cursory alignment(one line down each side, center of the wheel for toe, two lines per wheel at either edge to adjust camber, before you drive to the alignment shop

[240PETER]

Do i need to have my ka24de block machined if i rebuilding with new pistons?

[VNG704]

Originally Posted by 240PETER

Do i need to have my ka24de block machined if i rebuilding with new pistons?

Short answer, yes!