Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[brainfood]

Bersaglio's so hot! I kinda wish I kept mine.

[Sileighty_DRFT89]

I think I'm finally worthy to be on here



front: mb battles 18 x 9.5 +7
effective with 5 and 3 mil slip on spacers in front
rear: mb battles 18 x 9.5 + 5
effective with 10 mil spacer

tires: 215/40/18 wanlis all around

[slow_sr20]

how were you able to correct the rear camber on the m???

[HyperTek]

wow that M30 is gonna be hot! good idea on the bodykit mods

[FIlthy 24O]

that m30 is looking mean j so what i like see what the power plant stay looking like

[jackb77]

Originally Posted by jjjjjjjjjjjjjjjjjjjjjjjjj

not a 240 but similar

stock body rear before spacers and the pull. just hammered the inner lip flat.
18x12 (0) 265-35 no spacer




pulled fronts 18x10.5(-7) and 15mm(-22) spacer 235-40





pulled rears 18x12 (0) with 30mm spacer





car finally back on the ground. still needs to go lower but, i just wanna drive it already!!!

What wheels?????

[forum04pl]

Originally Posted by jackb77

What wheels?????

work bersaglio's

[jjjjjjjjjjjjjjjjjjjjjjjjj]

***EDIT*** here's the link to my build http://forums.f31club.com/phpBB3/vie...p=29340#p29340 not the greatest but just working with what i got.

haha damn thanks for all the nice comments guys!!! i thought i was gonna get alot more heat for pulling my fenders that much with all that camber and fatty spacers.

Originally Posted by kalypso123

what is that

haha, yups its an 1992 infiniti m30

Originally Posted by slow_sr20

how were you able to correct the rear camber on the m???

haha no correction, just spacers to bring the wheels flush. these cars camber the load so making it look good is the easy part. actually trying to hook up and get traction is another thing. there are a couple of things you could do to correct camber though.

if you wanted to build a more competitive set-up. check out F31CLUB.COM and browse around the tech section. i think a couple of guys have done the s13 rear subframe swap. also since the stock rear suspension is the same as the z31 some of the f31 guys have adapted some of the z31 tricks to work on our cars. that info can be found here. z31.com | Suspension | Rear camber adjustment

i have done neither as all i care about is whore fitment and looking good sideways. there are no comps or even any legal places in hawaii so until i get to the mainland camber is my best friend.

Originally Posted by jackb77

What wheels?????

yups they are work/hart bersaglios in 18x10.5 (-7) and 18x12 (0) with the 15 and 30mil spacers its an effective -22 front and -30 rear.

i might be selling them soon to get the wheels that i really want and dont need spacers with. im looking into getting some 18x10.5 -25 hi disc(5in) and 19x12.5 -34 slo disc(7in) dont wanna give it away yet since i havent seen too many people in the us with these.

Originally Posted by FIlthy 24O

that m30 is looking mean j so what i like see what the power plant stay looking like

haha right on man!!! still trying to figure out which stand-alone to go with then ill throw on all my parts. its all hacked to shit in there right no. but, if you really wanna, here you go.



oh yeah and for all the people asking for more pix of the car please check out the members rides section in f31club.com so i dont whore out this thread too much. ill be starting a new build thread since i just found my camera and my sn on there is just "j"

thanks again for all the comments guys

[marveluz]

took the coils of the s13 on the background. so much for the daily.



undriveable as is. tires too tall, need to remove liner, relocate harness and maybe raise it .5 inch? need to try on s13 coils on rear but i doubt its long enough w/o having to add preload. anyone tried S13 coils on s14 rear?

[robtech]

raise .5"?????

BLASPHEMY!!!

you need to go lower

[Slammed180]

Originally Posted by marveluz

.................

What are your wheel specs?
look like 18x10's?

[marveluz]

Originally Posted by Slammed180

What are your wheel specs?
look like 18x10's?

9.5s +11 i think they're O disks

[leonb2004]

17x9 +0 Hotwheels SixtyEights
No Spacers
235/40/17 tires (Go not show, sorry)
50mm Rear
30mm Front
-3 Degrees Front Camber
-1 Rear.

Rear sits perfect, the fronts bulge a bit, overall, not bad. Maybe a good setup for somebody wanting something more track oriented.

[WangonwWarrior]

Originally Posted by leonb2004

17x9 +0 Hotwheels SixtyEights
No Spacers
235/40/17 tires (Go not show, sorry)
50mm Rear
30mm Front
-3 Degrees Front Camber
-1 Rear.

Rear sits perfect, the fronts bulge a bit, overall, not bad. Maybe a good setup for somebody wanting something more track oriented.

Where in alabama are you?

[WangonwWarrior]

Originally Posted by AutoTune

Any questions?

Yeah, when are you going to wash it?

[Slammed180]

Ok I'm looking for opinions on a wheel set-up.
I'm running 18x11 -16 in the back of my S13.
I have 20mm Origin front fenders, and my wheel wells are getting tubbed out right now.
my question is, what would look better stance wise, as well as handle better?
I'm thinking of 3 wheel options
18x9.5 -14
18x10 +5
18x10 -7

Really having a hard time narrowing down what would look best on the car.

[rhd_sw20]

whats this doing in here

15 x 8.5, - something???

[Slide~or~die]

hey guys, looking for a little help....
i have a set of works that r 18x9.5 +3 18x10.5-10
could you guys give me and idea of what kind of fenders ill need+ spacer and any other tips!
i was thinking 20mm in the front and 30 or 50mm cnt come to a choice....i think 50mm would be to much, i also think a 30mm would allow for better fitment with the works and latr on other wheels....

lmk what u guys think plz, trying to get this done before 2010...

[revat619]

Originally Posted by Slide~or~die

hey guys, looking for a little help....
i have a set of works that r 18x9.5 +3 18x10.5-10
could you guys give me and idea of what kind of fenders ill need+ spacer and any other tips!
i was thinking 20mm in the front and 30 or 50mm cnt come to a choice....i think 50mm would be to much, i also think a 30mm would allow for better fitment with the works and latr on other wheels....

lmk what u guys think plz, trying to get this done before 2010...

S13 or S14?
How much camber do you want to run?
What tire size do you want to run?

[greddyguy]

Originally Posted by AutoTune

I love seeing peole with rare jdm aero in us as much as the next guy but am I the only one who thinks thinks the combo w/ the koguchi power fenders and the uras gt kit looks like a total train wreck? I recall another member on here having the Koguchi power fenders and a diff kit and it matched much better. I think it was a hatch.

imo, the thing is a wreck. its a nice car, but something is off. needs moar lower. the camber looks like its set at 0 all around

[kuppler8]

i need a hand went to get some 205/50 mounted on my 15x10's today and my tire guy got them to seat on the wheel, but they couldnt take anything over 8 psi before it started puching the tire up and almost lift the beed off the wheel. any suggestions, i dont really wanna run another size if i dont half too

[240sxdriftin]

18x10 +22 all around

fronts 20mm spacer effective offset +2 with 225/40/18 feddys and 30mm wide fenders
rears 38mm spacer effective offset -16 with 235/40/18 feddys and 30mm overs

[AutoTune]

Originally Posted by greddyguy

imo, the thing is a wreck. its a nice car, but something is off. needs moar lower. the camber looks like its set at 0 all around

I don't think it's the wheel fitment. Maybe painted and a diff set of wheels It maybe more toward my taste but as of now it just does not look good to me. But it's his car.

[Leo-kun]

Hey guys, I've searched around this site but couldnt find the answer I needed. So my question is, what size spacer do you need to make R33 wheels fit flush on stock S13 fenders? I know they are 17x9 +30. Also how about a clean stretch on R33's? Nothing over the top. would I run something like a 195/40/17?

[FaLKoN240]

Originally Posted by driftgodleo

Hey guys, I've searched around this site but couldnt find the answer I needed. So my question is, what size spacer do you need to make R33 wheels fit flush on stock S13 fenders? I know they are 17x9 +30. Also how about a clean stretch on R33's? Nothing over the top. would I run something like a 195/40/17?

...they don't even make that size tire...

You'd need some special order shit for that.

[Leo-kun]

Originally Posted by FaLKoN240

...they don't even make that size tire...

You'd need some special order shit for that.

Thats why I need help.

[FaLKoN240]

Originally Posted by driftgodleo

Thats why I need help.

Just get a 215/40/17 and 15 or 20mm spacers.

[Om1kron]

Originally Posted by brainfood

Bersaglio's so hot! I kinda wish I kept mine.

Me too dick, you know how many times I had to listen to GSXRJordan tell me how deep his dishes were when he was at my house?

A MILLION TIMES!!!

[Zaku II]

Love me I have s13 parts also.

Im not to sure if i can post here yet, but here goes.

front 15x6 -30 - complete 180sx front suspension.
Rears are 15x10+0

I know, I know front+rear needs more low. Solid Axle is weak =(

[IMG][IMG][/IMG][/IMG]

[IMG][IMG][/IMG][/IMG]

[backroadtouge]

Originally Posted by driftgodleo

Thats why I need help.

195/40-17?
actually tire rack has yokohama s. drive at $84 each in that size...
pirelli and continentals in that size are 20-40 bucks more