|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
10-03-2014, 02:48 PM | #1 |
Join Date: Nov 2013
Location: kentucky
Age: 34
Posts: 11
Trader Rating: (0)
Feedback Score: 0 reviews
|
S13 Chassis Harness and S.M.J. Pinout
Hello Zilvia,
I've been working on my chassis harness and have put together a good bit of info to help me stay organized... Hope someone else might find it useful. My coupe does not have A.B.S., and as I understand that is the biggest differences in the chassis harness for the s13. I am also not running fog lights, ac, or the A.S.C.D. All the info was pulled from the 1989 F.S.M. PLUGS NOT LISTED E5 - REAR WASHER MOTOR E6 - FRONT WASHER MOTOR E7 - FLUID LEVEL SWITCH E12 - INHIBITOR SWITCH E13 - REVOLUTION SENSOR E14 - INHIBITOR SWITCH E15 - TO SOLENOID VALVE SUB-HARNESS E43 – Dropping resistor E44 – Compressor E46 – A.I.V. control solenoid valve E51 – To engine room harness (E28(FOG HARNESS)) E52 – Front fog lamp R.H. E53 – Front fog lamp L.H. E54 – Front wheel sensor L.H. E56 – Actuator E58 – A.S.C.D. actuator E106 – Key lock solenoid E114 – To E.F.I. harness (F3) E115 – To E.F.I. harness (F4) E116 – To E.F.I. harness (F5) E117 – A/T control unit E118 – A.S.C.D. control unit Pinout for the S.M.J. (E101) Plugs and Pinouts Wire Colors and Wire routs Fuse box labels Again I hope this helps. Zilvia has been a huge help on my build and I'm hoping to give back a little. Any questions or corrections, lemme know. Thanks guys! |
Sponsored Links |
Bookmarks |
Tags |
pinout, s13, s13 chassis harness, smj |
|
|