Fender Roller............ Anybody Got One ??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

WoolyS14DET · 07-19-2010, 02:15 PM

Just like it says.....................

anybody around Long Island close to the city (i work in the city) have a fender roller that they are willing to let me use,borrow,or rent ???

Let me know

Yasko · 07-30-2010, 06:14 PM

I'm in need of one also. I'm thinking about buying one and a heat gun. Then once I'm done, I'll start renting it to people. Still not sure if I want to go through with it though.

fckillerbee · 07-30-2010, 06:28 PM

Quote:

Originally Posted by Yasko

I'm in need of one also. I'm thinking about buying one and a heat gun. Then once I'm done, I'll start renting it to people. Still not sure if I want to go through with it though.

buy a baseball bat...and a jack.....done.

Yasko · 07-30-2010, 06:59 PM

vvvvvvvvvv

bermeo240 · 07-31-2010, 09:53 AM

i used a bat.without jacking up my car and rolled my car slowly....came out good....

WoolyS14DET · 08-09-2010, 10:38 AM

Unlike you clowns I actually care about my paint. LOL if you have seen my car then you will agree !!!

240sx123$ · 08-09-2010, 10:56 AM

I care about my paint a lot too. But a fender roller has proven to be difficult to obtain, and I couldnt wait any longer to roll them, as my tire would be shredded by now if i didnt. Doing it with a baseball bat is VERY doable without damaging any paint that will be seen. The paint on the actual lip that youre rolling will be damaged, but only from the bat rolling and scraping along it. Once its rolled you wont be able to see it. Im running a 255 on an 18" +22 wheel on an s14, so I didnt really need an aggressive roll to get it to clear. I didnt bend the lip all the way up to the inside of the fender though, just rolled it enough to make clearance. Id say I rolled it (from level) to about 2/3 of the way up, which was enough to clear my tires. Just take your time, and use a bat with softer wood. I used a kiddy t-ball bat, as the diameter on full sized bats were too large.

240sx123$ · 08-09-2010, 10:59 AM

Oh, and you can do most of the rolling early on without any heat. Its once the angle of the metal becomes very acute that the paint starts to crack. So if you dont need ALL of the clearance, dont roll it all the way. Just roll it as far as it needs to go to clear. If you need to roll it completely flush, id get a roller and heat gun.

stunnaben · 08-09-2010, 11:00 AM

buy one from PBM, 220 shipped....

91cupcake240 · 08-09-2010, 11:04 AM

I need someone to roll my fenders in the 805! So if anyones near by pm me

Sent from my T-Mobile G1 using Tapatalk

WoolyS14DET · 08-09-2010, 05:25 PM

Its all about being flush so with that being said I think that I will continue to look for a fender roller and if I have no luck then I will buy one. 240sx123$ thanks for the great tips.

bermeo240 · 08-09-2010, 05:29 PM

i rolled my fenders with a bat cause i absolutely had to.....or my tire would have been sliced....but yeah ur car is really clean....but here....180 doesnt seem bad and he is in ny...
http://zilvia.net/f/sale-items/33512...ue-wrench.html

WoolyS14DET · 08-09-2010, 05:32 PM

Quote:

Originally Posted by bermeo240

i rolled my fenders with a bat cause i absolutely had to.....or my tire would have been sliced....but yeah ur car is really clean....but here....180 doesnt seem bad and he is in ny...
http://zilvia.net/f/sale-items/33512...ue-wrench.html

Thanks man good looking out !!

word sux · 08-10-2010, 04:25 PM

unlike us clowns?

yea this really makes us want to help you.

if u use a baseball bat use a heat gun and your paint won't crack

WoolyS14DET · 08-11-2010, 10:13 AM

Quote:

Originally Posted by word sux

unlike us clowns?

yea this really makes us want to help you.

if u use a baseball bat use a heat gun and your paint won't crack

i just am trying to refrain from doing it that way. I would rather use a fender roller and avoid any issues if possible. in a joking manner we are all clowns guy !!

07-19-2010, 02:15 PM	#1
WoolyS14DET Zilvia FREAK! Join Date: Mar 2008 Location: Long Island, NY Age: 45 Posts: 1,310 Trader Rating: (18) Feedback Score: 18 reviews	Fender Roller............ Anybody Got One ??? Just like it says..................... anybody around Long Island close to the city (i work in the city) have a fender roller that they are willing to let me use,borrow,or rent ??? Let me know

07-30-2010, 06:59 PM	#4
Yasko Join Date: Jul 2010 Location: around Posts: 32 Trader Rating: (0) Feedback Score: 0 reviews	vvvvvvvvvv Last edited by Yasko; 03-29-2011 at 04:30 PM..

08-09-2010, 11:04 AM	#10
91cupcake240 Zilvia FREAK! Join Date: Jul 2010 Location: oxnard ca. Age: 35 Posts: 1,084 Trader Rating: (12) Feedback Score: 12 reviews	I need someone to roll my fenders in the 805! So if anyones near by pm me Sent from my T-Mobile G1 using Tapatalk __________________ _____________________________

07-30-2010, 06:14 PM	#2
Yasko Join Date: Jul 2010 Location: around Posts: 32 Trader Rating: (0) Feedback Score: 0 reviews	I'm in need of one also. I'm thinking about buying one and a heat gun. Then once I'm done, I'll start renting it to people. Still not sure if I want to go through with it though.

07-31-2010, 09:53 AM	#5
bermeo240 Leaky Injector Join Date: Nov 2009 Location: queens, ny Age: 33 Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	i used a bat.without jacking up my car and rolled my car slowly....came out good....

08-09-2010, 10:38 AM	#6
WoolyS14DET Zilvia FREAK! Join Date: Mar 2008 Location: Long Island, NY Age: 45 Posts: 1,310 Trader Rating: (18) Feedback Score: 18 reviews	Unlike you clowns I actually care about my paint. LOL if you have seen my car then you will agree !!!

08-09-2010, 10:56 AM	#7
240sx123$ BANNED Join Date: Jul 2010 Location: PA Posts: 603 Trader Rating: (2) Feedback Score: 2 reviews	I care about my paint a lot too. But a fender roller has proven to be difficult to obtain, and I couldnt wait any longer to roll them, as my tire would be shredded by now if i didnt. Doing it with a baseball bat is VERY doable without damaging any paint that will be seen. The paint on the actual lip that youre rolling will be damaged, but only from the bat rolling and scraping along it. Once its rolled you wont be able to see it. Im running a 255 on an 18" +22 wheel on an s14, so I didnt really need an aggressive roll to get it to clear. I didnt bend the lip all the way up to the inside of the fender though, just rolled it enough to make clearance. Id say I rolled it (from level) to about 2/3 of the way up, which was enough to clear my tires. Just take your time, and use a bat with softer wood. I used a kiddy t-ball bat, as the diameter on full sized bats were too large.

08-09-2010, 10:59 AM	#8
240sx123$ BANNED Join Date: Jul 2010 Location: PA Posts: 603 Trader Rating: (2) Feedback Score: 2 reviews	Oh, and you can do most of the rolling early on without any heat. Its once the angle of the metal becomes very acute that the paint starts to crack. So if you dont need ALL of the clearance, dont roll it all the way. Just roll it as far as it needs to go to clear. If you need to roll it completely flush, id get a roller and heat gun.

08-09-2010, 11:00 AM	#9
stunnaben Zilvia Addict Join Date: May 2009 Location: Houston, TX Age: 35 Posts: 969 Trader Rating: (4) Feedback Score: 4 reviews	buy one from PBM, 220 shipped....

08-09-2010, 05:25 PM	#11
WoolyS14DET Zilvia FREAK! Join Date: Mar 2008 Location: Long Island, NY Age: 45 Posts: 1,310 Trader Rating: (18) Feedback Score: 18 reviews	Its all about being flush so with that being said I think that I will continue to look for a fender roller and if I have no luck then I will buy one. 240sx123$ thanks for the great tips.

08-09-2010, 05:29 PM	#12
bermeo240 Leaky Injector Join Date: Nov 2009 Location: queens, ny Age: 33 Posts: 124 Trader Rating: (0) Feedback Score: 0 reviews	i rolled my fenders with a bat cause i absolutely had to.....or my tire would have been sliced....but yeah ur car is really clean....but here....180 doesnt seem bad and he is in ny... http://zilvia.net/f/sale-items/33512...ue-wrench.html

08-10-2010, 04:25 PM	#14
word sux Zilvia FREAK! Join Date: Dec 2009 Location: earth Age: 62 Posts: 1,138 Trader Rating: (0) Feedback Score: 0 reviews	unlike us clowns? yea this really makes us want to help you. if u use a baseball bat use a heat gun and your paint won't crack