OR OS Giken TS2CD twin plate clutch for SR20DET - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

e1_griego · 02-08-2024, 03:29 PM

Selling an OS Giken TS2CD twin plate clutch for SR20DET engines. I pulled this from my car last month because I've put my car back to a friendlier street mode with a less aggressive clutch that is easier to drive. This is the 215mm disc version with steel cover, and is supposedly good for 650ft/lbs. Way overkill for ... pretty much every SR.

I purchased the clutch new from RHDJapan and installed in early 2022. Clutch has maybe 500 miles on it since install as I wrecked the car it was in, swapped everything to a new chassis, and have barely driven the car since it was put back together. Clutch works great, just doesn't want to slip much and is harder to drive in traffic. Now that my s13 is street driver again, no reason to run such an aggressive setup.

This also includes the required shorter throwout bearing sleeve, also ordered new from RHDJapan.

Looking for $750. Not looking for any trades.

02-08-2024, 03:29 PM	#1
e1_griego Post Whore! Join Date: Sep 2004 Location: Independence, Ore. Age: 39 Posts: 2,715 Trader Rating: (24) Feedback Score: 24 reviews	OS Giken TS2CD twin plate clutch for SR20DET Selling an OS Giken TS2CD twin plate clutch for SR20DET engines. I pulled this from my car last month because I've put my car back to a friendlier street mode with a less aggressive clutch that is easier to drive. This is the 215mm disc version with steel cover, and is supposedly good for 650ft/lbs. Way overkill for ... pretty much every SR. I purchased the clutch new from RHDJapan and installed in early 2022. Clutch has maybe 500 miles on it since install as I wrecked the car it was in, swapped everything to a new chassis, and have barely driven the car since it was put back together. Clutch works great, just doesn't want to slip much and is harder to drive in traffic. Now that my s13 is street driver again, no reason to run such an aggressive setup. This also includes the required shorter throwout bearing sleeve, also ordered new from RHDJapan. Looking for $750. Not looking for any trades. Last edited by e1_griego; 03-30-2024 at 12:41 PM..