|
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
|
Thread Tools | Display Modes |
09-16-2018, 12:30 PM | #1 |
KA24E with DE ECU Distributor RE-CLOCKIN 360deg to 180 def
Can anyone shine in with some information on how to re-clock the ka24e distributor into a 180deg instead of the 360 deg that it is stock.
Yes I searched and came up with very little on this topic I’m running a ka24et on a dual cam ecu My setup Ka24e stock T3/T4 turbonetics Tail 1 bar wastehate Presicion injectors 880cc low impudence Z32 mafs V mount intercooler Dual cam ecu Tuned by Jim Wolf Apexi safc Aem 355 fuel pump inline Car runs fine and makes good power As is with the 360 deg configuration ,but I fight temps my timing is off . I know just call jim wolf I did and have sent a distributor in to them but it’s been about 3 weeks and it still hasn’t even been started to Be worked on . I’m going to assume they are busy and it might be a while before I get it back. At this point I’m debating just squash the Jim wolf ecu and go mega squirt or anything else that I don’t have to rely on someone’s like this, just a shame I’ve spent a lot of time and it finally running decently I’d hate to start all over . I really don’t want to wait anymore, Hope someone can help me out Thanks for the help |
|
Sponsored Links |
Bookmarks |
|
|