UT Built RBZ32 Track Car HKS Tomei SARD - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ZzZleeper · 08-10-2014, 10:33 PM

Its a 1990 300ZX Twin Turbo, with an RB25. I've been working on this car for the past year and a half. It is a purpose built track car, It is not street legal. The interior is completely stripped. I do still have all of the body wiring harness, if someone wanted to wire turn signals and brake lights.

so it's an RB25, it has HKS pistons, Eagle rods, rebalanced crankshaft, tomei headgasket, HKS 272 cams with VTC delete and solid lifters, tons of head work, HKS exhaust manifold, SARD 60mm wastegate, turbonetics 60-1, Freddy intake manifold, Bosch 660cc injectors, topfeed fuel rail, 340 inline pump, all fuel lines are 6an, 12 gallon fuel cell, aeromotive FPR, Wiring specialties stand alone harness, Apexi Power FC with Datalogit, Greddy E-01 boost controller, Light weight battery mounted where the glovebox would sit, Nismo oil pump, and Waterpump, 20row COPP oil cooler, Custom 6qt Rear Sump oil pan, It has a rearmount radiator setup, tubed front end, full suspension, ZNS creations 14in BBK kit, OS Giken Twin Disc clutch, stainless braided clutch line with new slave, Full cage, It only has one Recaro SPG in it, ( I was too broke to buy 2 lol) and it is real. The interior is completely stripped and painted, it is incredibly light. the exhaust is a custom 3in. Also a custom Rear Diffuser, Front Splitter, and an undercage scrape bar. The wing is a Orgin-Lab 1750mm carbon, with custom frame mount stands. Everyone keeps wanting to buy the wing lol. The wheels are Mickey Thompson Classics 16x10 -58. I've left off a ton of parts that im cant even remember, but I have a full build thread for it on 300zxclub.com if you wanted to check it out.

So right now, its on a base tune and is only running around 14psi. The motor can handle up to 28psi, and at that point would be around 750+ with the right injectors. With the cams it should be at 600whp at about 20-22psi. Im not planning on having it tuned until next spring. If I keep it, i'll end up just dropping more and more money into it.

The bad: it only has one seat, the windshield has a crack in it, the shifter does not have a cover to the trans tunnel, it could use some gauges. I have a mount and keep my laptop connected to the Datalogit and i've been using that for all of my gauges.

For me to consider selling it, i'd have to get $15000.
I would consider trades, plus cash. Not looking to add cash on top of anything. Not really looking for an S chassis,
I'm in no hurry to sell, and haven't decided if i want too for sure yet. There's an event on Sept 6th i'll be taking it to.

Text, Email, PM with any questions. The company i work for has connections for shipping if interested as well.
801 Seven595256
[email protected]
Heres a couple pics, also have a build thread on 3zx

Day i bought it,

In the videos its turned down to 14psi, and the rev limiter was set to 5900rpm. The cams will allow it to rev up to 8500 if you wanted.

http://youtu.be/eOEyx1iWcTE

http://youtu.be/fvt_JUBF7kw

s0fa king · 08-11-2014, 05:21 AM

I love the look of this!!!

apexis13sx · 08-11-2014, 06:30 PM

Amazing sickest z32 evarrrrrrrrrrrrrr

Yardjass · 08-11-2014, 07:27 PM

This is the pinnacle of awesomeness!

ZzZleeper · 08-12-2014, 10:01 AM

Haha thanks guys! Ive always been in love with Z32's so itd be hard to let it go. But I have 2 others so one of them is the odd one out lol.

Pretty much everything on the car is custom as you can see, I also have pictures of just about everything on the car as it was being built.
Heres a few more pics with my dd z32.

RockTown07 · 08-12-2014, 11:52 AM

Is there a link to more pictures or is this all you have? Amazing looking car man honestly very well done!

ZzZleeper · 08-12-2014, 12:28 PM

Quote:

Originally Posted by RockTown07

Is there a link to more pictures or is this all you have? Amazing looking car man honestly very well done!

Thanks man! I have a ton a pics of it lol, just takes too long to put them here.

Here's a link to my build thread on 300zxclub.com
http://www.300zxclub.com/showthread.php?t=215628

Also forgot, it has a brand new Raw Brokerage CAS, ngk idrium plugs Yellow jacket Coilpacks, New Ignitor chip, wiring specialties coil pack harness.

ZzZleeper · 08-17-2014, 10:20 PM

Have had a ton of interest, but am going to stay pretty firm on price/ value of any trades.

I also had someone ask if anything was missing in the interior. I just want to make it clear, the interior is complete stripped. There is absolutely no wiring in the car besides the EFI harness. Here's a little better pic of the interior

_hollywood · 08-17-2014, 10:27 PM

Wow wow wow!!!

subiesean · 08-18-2014, 11:44 AM

videos from the event? this thing is fricken awesome, wish i didn't have a wedding to pay for or I would be all over this

Frostedbutts · 08-18-2014, 12:18 PM

I thought about buying this a long time ago when you first listed it. I still want it.

BoostedLove · 08-18-2014, 05:27 PM

This thing is rad. Glws

bottlefed97 · 08-21-2014, 12:46 PM

Love everything about this car. PM'd you.

youradumb1 · 08-21-2014, 04:09 PM

stfu .. still has t tops .. baddest z32 ever

JohnnyDrfiter22 · 08-21-2014, 05:38 PM

Wow!! amazing car, GLWS!!

drewc · 08-26-2014, 12:39 PM

I think I just found my favorite Nissan build yet. you should post videos of this thing running

08-10-2014, 10:33 PM	#1
ZzZleeper Zilvia Member Join Date: Dec 2010 Location: SL,UT Age: 34 Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	Built RBZ32 Track Car HKS Tomei SARD Its a 1990 300ZX Twin Turbo, with an RB25. I've been working on this car for the past year and a half. It is a purpose built track car, It is not street legal. The interior is completely stripped. I do still have all of the body wiring harness, if someone wanted to wire turn signals and brake lights. so it's an RB25, it has HKS pistons, Eagle rods, rebalanced crankshaft, tomei headgasket, HKS 272 cams with VTC delete and solid lifters, tons of head work, HKS exhaust manifold, SARD 60mm wastegate, turbonetics 60-1, Freddy intake manifold, Bosch 660cc injectors, topfeed fuel rail, 340 inline pump, all fuel lines are 6an, 12 gallon fuel cell, aeromotive FPR, Wiring specialties stand alone harness, Apexi Power FC with Datalogit, Greddy E-01 boost controller, Light weight battery mounted where the glovebox would sit, Nismo oil pump, and Waterpump, 20row COPP oil cooler, Custom 6qt Rear Sump oil pan, It has a rearmount radiator setup, tubed front end, full suspension, ZNS creations 14in BBK kit, OS Giken Twin Disc clutch, stainless braided clutch line with new slave, Full cage, It only has one Recaro SPG in it, ( I was too broke to buy 2 lol) and it is real. The interior is completely stripped and painted, it is incredibly light. the exhaust is a custom 3in. Also a custom Rear Diffuser, Front Splitter, and an undercage scrape bar. The wing is a Orgin-Lab 1750mm carbon, with custom frame mount stands. Everyone keeps wanting to buy the wing lol. The wheels are Mickey Thompson Classics 16x10 -58. I've left off a ton of parts that im cant even remember, but I have a full build thread for it on 300zxclub.com if you wanted to check it out. So right now, its on a base tune and is only running around 14psi. The motor can handle up to 28psi, and at that point would be around 750+ with the right injectors. With the cams it should be at 600whp at about 20-22psi. Im not planning on having it tuned until next spring. If I keep it, i'll end up just dropping more and more money into it. The bad: it only has one seat, the windshield has a crack in it, the shifter does not have a cover to the trans tunnel, it could use some gauges. I have a mount and keep my laptop connected to the Datalogit and i've been using that for all of my gauges. For me to consider selling it, i'd have to get $15000. I would consider trades, plus cash. Not looking to add cash on top of anything. Not really looking for an S chassis, I'm in no hurry to sell, and haven't decided if i want too for sure yet. There's an event on Sept 6th i'll be taking it to. Text, Email, PM with any questions. The company i work for has connections for shipping if interested as well. 801 Seven595256 [email protected] Heres a couple pics, also have a build thread on 3zx Day i bought it, In the videos its turned down to 14psi, and the rev limiter was set to 5900rpm. The cams will allow it to rev up to 8500 if you wanted. http://youtu.be/eOEyx1iWcTE http://youtu.be/fvt_JUBF7kw __________________

08-11-2014, 06:30 PM	#3
apexis13sx Zilvia Member Join Date: Dec 2006 Location: San Antonio Age: 36 Posts: 192 Trader Rating: (0) Feedback Score: 0 reviews	Amazing sickest z32 evarrrrrrrrrrrrrr __________________ 08 HRZ33

08-12-2014, 10:01 AM	#5
ZzZleeper Zilvia Member Join Date: Dec 2010 Location: SL,UT Age: 34 Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	Haha thanks guys! Ive always been in love with Z32's so itd be hard to let it go. But I have 2 others so one of them is the odd one out lol. Pretty much everything on the car is custom as you can see, I also have pictures of just about everything on the car as it was being built. Heres a few more pics with my dd z32. __________________

08-17-2014, 10:20 PM	#8
ZzZleeper Zilvia Member Join Date: Dec 2010 Location: SL,UT Age: 34 Posts: 205 Trader Rating: (0) Feedback Score: 0 reviews	Have had a ton of interest, but am going to stay pretty firm on price/ value of any trades. I also had someone ask if anything was missing in the interior. I just want to make it clear, the interior is complete stripped. There is absolutely no wiring in the car besides the EFI harness. Here's a little better pic of the interior __________________

08-18-2014, 11:44 AM	#10
subiesean Zilvia Junkie Join Date: Jun 2011 Location: Chicago, IL Age: 32 Posts: 306 Trader Rating: (0) Feedback Score: 0 reviews	videos from the event? this thing is fricken awesome, wish i didn't have a wedding to pay for or I would be all over this __________________ I change cars too often... Ho.Mo.Co.

08-11-2014, 05:21 AM	#2
s0fa king Zilvia Addict Join Date: May 2009 Location: earth Posts: 755 Trader Rating: (7) Feedback Score: 7 reviews	I love the look of this!!!

08-11-2014, 07:27 PM	#4
Yardjass Zilvia Junkie Join Date: Apr 2014 Location: Mt. Pleasant, SC Age: 36 Posts: 408 Trader Rating: (0) Feedback Score: 0 reviews	This is the pinnacle of awesomeness!

08-12-2014, 11:52 AM	#6
RockTown07 Join Date: Apr 2014 Location: MN Age: 35 Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Is there a link to more pictures or is this all you have? Amazing looking car man honestly very well done!

08-17-2014, 10:27 PM	#9
_hollywood Join Date: Mar 2014 Location: Portland Age: 40 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Wow wow wow!!!

08-18-2014, 12:18 PM	#11
Frostedbutts Leaky Injector Join Date: Sep 2011 Location: Colorado Age: 34 Posts: 144 Trader Rating: (1) Feedback Score: 1 reviews	I thought about buying this a long time ago when you first listed it. I still want it. __________________

08-18-2014, 05:27 PM	#12
BoostedLove Leaky Injector Join Date: Sep 2008 Location: Dallas Posts: 83 Trader Rating: (3) Feedback Score: 3 reviews	This thing is rad. Glws

08-21-2014, 12:46 PM	#13
bottlefed97 Join Date: Dec 2013 Location: Orlando Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	Love everything about this car. PM'd you.

08-21-2014, 04:09 PM	#14
youradumb1 Zilvia Junkie Join Date: Nov 2010 Location: atl Age: 41 Posts: 471 Trader Rating: (0) Feedback Score: 0 reviews	stfu .. still has t tops .. baddest z32 ever __________________ just better than you

08-21-2014, 05:38 PM	#15
JohnnyDrfiter22 Zilvia Addict Join Date: Apr 2008 Location: New Jersey Age: 41 Posts: 670 Trader Rating: (0) Feedback Score: 0 reviews	Wow!! amazing car, GLWS!!

08-26-2014, 12:39 PM	#16
drewc Join Date: Apr 2010 Location: ga Age: 34 Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	I think I just found my favorite Nissan build yet. you should post videos of this thing running