11-07-2012, 09:59 PM | #1 |
Leaky Injector
|
95 e36 m3,Gramlights,Stance coils, Project Mu, Sparco,Much More!
Up for sale is my 95 M3 with a clean title. The chassis has 200k. The engine has roughly about the 30k on a rebuild. The engine runs very smoothly. This car has been my project for the last 2 years. Unfortunately I do not have time to work on it anymore. The car was a daily driver up until about two months ago. Now it just sits in my driveway with a cover on it. Everything I have done to the car has been to improve it. This was going to be my track car for time attack use but it never actually made it to the track. I did not cut corners or put cheap / used parts on it. (except for the NRG hub and quick release but don’t look at that lol). The car just passed smog in October. There are a few Zilvia members that have seen my car in person and I am pretty sure they will vouch for my car. Anyway onto the goods.
MODS: Engine / Exhaust: Euro Spec MAF UUC cat back New Vanos Unit, valve cover gasket, valve train tune (all has about 50 miles on it) Suspension / Wheels etc… Stance Gr + Coilovers (about 150 miles on them) Dinan adjustable front and rear sway bars Project Mu Club Racer rotors (about 300 miles on them) Project Mu Euro Eco pads (about 300 miles on them) Turner Motorsports rear upper outside control arm bushings (pillow ball & about 150 miles on them) UUC rear trailing arm bushings (poly & about 1000 miles on them) Rays Engineering Gramlights 57 Max 17x9 +35 all the way around (about 150 miles on them, only E36 out there with these wheels I guarantee it) Forged aluminum 20mm wheel spacers makes wheels offset +15 Stud conversion with Kics Project Kyokugen 50mm black lug nuts Toyo R1R 235/40/17 all the way around (150 miles on them) AC Schintzer front strut bar Ride height adjustment and alignment done by Evasive Motorsports (about 150 miles on that) Interior: Sparco Monza steering wheel Sparco Evo driver seat Sparco Evo XL passenger seat (all this stuff is about a year old but still looks new) Sparco 4 point quick release harnesses Sparco Harness bar Sparco seat mounting hardware. (the seats are not on rails, must manually adjust the seat by removing etc..) *the car has a head unit and speakers in the door panels, all you need to do is hook up the amp which I will give to you. (all stock sound system) Trunk is gutted (will give you the spare) Exterior: E36 LTW front corner splitters (OEM BMW, RARE) E39 M5 rear spoiler Fender roll / pull done by Evasive Motorsports Depo lights Dinan black kidney grills Issues: Power Steering leak, honestly it is not that bad but it has made a mess underneath the car Roof headliner needs to be replaced Rear window rubber seals need to be replaced Front left blinker light is having a short of some sort, which sometimes effects the day time running lights (idk why) Driver side door handle trim is missing but i do have the replacemet for it Bushings are a little noisy. Rear still rubs a tiny bit so it needs to be pulled out a little more PRICE: 11k obo PRICE IS NOT UP FOR DISSCUSION. I DO NOT CARE ABOUT YOUR OPINION. ** I have receipts for almost everything and i will show serious buyers ** Contact Info: Phone: (562) 781-1208 call/text PM is ok Location: Whittier CA Pictures do not do it justice but here you go |
Sponsored Links |
11-07-2012, 10:41 PM | #4 | |
Leaky Injector
|
Quote:
thank you sir |
|
11-08-2012, 01:36 PM | #7 |
Leaky Injector
|
|
11-09-2012, 07:58 PM | #9 | |
Leaky Injector
|
Quote:
|
|
11-11-2012, 10:50 AM | #14 |
Leaky Injector
|
|
11-11-2012, 01:28 PM | #15 |
Zilvia Junkie
|
damn car is pretty sick... probably dont wanna trade for a built fastback... super clean, vmounted with top mount t3/t04e turbo and 880cc injectors? sitting on brand new stance coils with new work emotions.
|
11-11-2012, 11:08 PM | #16 |
Leaky Injector
|
|
11-27-2012, 10:39 PM | #24 |
Leaky Injector
|
|
Bookmarks |
|
|