Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 11-12-2011, 05:06 PM   #1
GetMyDrift?
Leaky Injector
 
Join Date: Feb 2011
Location: Arkansas
Age: 33
Posts: 85
Trader Rating: (3)
GetMyDrift? is an unknown quantity at this point
Feedback Score: 3 reviews
Help: S13 Sr in S14 No Power?

I had just hooked everything up with the WS engine harness and its an auto to manual swap as well so i wired in a push button start. It was cranking fine for a day(not turning over tho) but there was no spark. Next day when I go out there and tinker with it, I push the Start button and the dash lights go off when i do that. I press it again and they stayed off.

Now there are no dash lights, fuel pump doesnt come on, starter wont crank, nothing. I have no idea what happened. It makes no sense to me. Can anyone help me here?
GetMyDrift? is offline   Reply With Quote
Sponsored Links
Old 11-12-2011, 07:31 PM   #2
rcdad123
Zilvia Addict
 
rcdad123's Avatar
 
Join Date: Jul 2011
Location: san diego
Posts: 639
Trader Rating: (0)
rcdad123 is an unknown quantity at this point
Feedback Score: 0 reviews
check your battery, fuses and wire connections, including grounds. seems like you blew one of the big square fuses or the battery is dead. or as simple as battery terminal clamps loose.
rcdad123 is offline   Reply With Quote
Old 11-12-2011, 07:50 PM   #3
GetMyDrift?
Leaky Injector
 
Join Date: Feb 2011
Location: Arkansas
Age: 33
Posts: 85
Trader Rating: (3)
GetMyDrift? is an unknown quantity at this point
Feedback Score: 3 reviews
Battery clamps are tight, Battery is at correct voltage. No fuses are blown. I have Intake Manifold Grounds, Ground by ecu, Ground by drivers side fuse box, Lower harness ground, ground by truck latch (thats all i can think of off my head.
GetMyDrift? is offline   Reply With Quote
Old 11-13-2011, 12:09 AM   #4
rcdad123
Zilvia Addict
 
rcdad123's Avatar
 
Join Date: Jul 2011
Location: san diego
Posts: 639
Trader Rating: (0)
rcdad123 is an unknown quantity at this point
Feedback Score: 0 reviews
check power in and out of ignition switch. use a voltmeter to check voltage in the back of the ignition key tumbler where the big 10 gauge wires are soldered.
rcdad123 is offline   Reply With Quote
Old 12-03-2011, 08:53 PM   #5
GetMyDrift?
Leaky Injector
 
Join Date: Feb 2011
Location: Arkansas
Age: 33
Posts: 85
Trader Rating: (3)
GetMyDrift? is an unknown quantity at this point
Feedback Score: 3 reviews
I got my power back and the car is now cranking again. I have Spark and Air and voltage to the Injectors but I don't think the injectors are firing because I can't hear them click via screwdriver test. I'm thinking there is something to do with this "ORANGE" start signal wire I keep reading about. I had read something that it needs to be cut and wired to the ignition or something? I wouldnt think that would have to happen tho.
GetMyDrift? is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net