TX Stern double step lip 18x11 +13 staggered - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

zoo · 06-16-2021, 11:31 AM

Sold

Stern Schmiede R16-S

18x11 +13 front and rear
3.5" and 4" lips
5x114.3 PCD, 73mm center bore

$2500
Shipping/insurance to the lower 48 states is around $160
Located in Dallas, TX.

Thicker backpads and narrower lips on the front
Double step build, using off the shelf parts with stem hole on the lips . 2 of the lips and 2 of the barrels are new. All new zinc plated nuts. Billet center caps, bullet shaped(semiwadcutter was the inspiration).

Can test fit if local to DFW. Can also assemble staggered 10.5 and 11.5; as well as 9.5" and 10.5(I have 2" lips for the front.).
No cracks, bends or welds. No curb rash.

Album, full size pics
https://imgur.com/a/XUAg800

06-16-2021, 11:31 AM	#1
zoo Zilvia Member Join Date: Oct 2011 Location: Dallas, TX Posts: 167 Trader Rating: (1) Feedback Score: 1 reviews	Stern double step lip 18x11 +13 staggered Sold Stern Schmiede R16-S 18x11 +13 front and rear 3.5" and 4" lips 5x114.3 PCD, 73mm center bore $2500 Shipping/insurance to the lower 48 states is around $160 Located in Dallas, TX. Thicker backpads and narrower lips on the front Double step build, using off the shelf parts with stem hole on the lips . 2 of the lips and 2 of the barrels are new. All new zinc plated nuts. Billet center caps, bullet shaped(semiwadcutter was the inspiration). Can test fit if local to DFW. Can also assemble staggered 10.5 and 11.5; as well as 9.5" and 10.5(I have 2" lips for the front.). No cracks, bends or welds. No curb rash. Album, full size pics https://imgur.com/a/XUAg800 Last edited by zoo; 08-21-2021 at 06:49 PM..