PA Head/Cam/Intake Ls1

[Stumped]

*This is a complete running engine. Oil pan, flexplate, starter, valve covers, coil packs, fuel injectors, fuel rail, cam and rear cover, valley cover, power steering pump, water pump, and alternator are all included.

-~60k mile 99 Camaro ls1
-Ported and milled 243 ls6 heads for 11:1 compression
-Manley .650 lift double springs
-comp cams adjustable double roller timing chain
-comp cam. 234/239 .612/.610 112+3
-comp cams push rods
-comp cams trunion rocker arm bearing upgrade
-Fast intake with stock throttle body
-36 lb injectors
-ls7 lifters
-ported and shimmed ls6 oil pump
-25% under drive crank pulley

This engine has gone a best of 10.7 @125 in my auto s13 240.

I dont have any good video of the car in my 240, but here is an idle clip of the cam in a Camaro. Mobile Photobucket

I can ship at buyers expense if needed, but prefer local pickup.
$3600

[Stumped]

bump 4k obo

[Stumped]

bump. This is a steal!

[nate1]

bump for a pa dude

[Stumped]

Originally Posted by nate1

bump for a pa dude

Thanks! bump.