|
01-11-2017, 07:56 AM
|
#1 |
|
Zilvia Junkie
 |
Countersteer LLC 180SX race car shell
Name: Dylan Crumley
Location: Canton GA Contact: [email protected] or 770-714-0134 PRICE: $5,000 or will remove some parts to meet someones price range. Running and driving 350Z, G35 or 240SX trades welcome of more value only Car was hit in the left rear quarter panel on track. Broke the over fender and tore the quarter panel behind it. Can be cut out or beat in and the over repaired. Only flaw with the car. I've cleaned it a little since the current pictures posted here, rubber and dust everywhere... Chassis: 1989 Nissan 180SX Chassis fully stripped and painted including under body Stitch welded engine bay and front wheel wells Countersteer FD Legal roll cage 1.625" DOM .095" wall tubing Inner doors gutted Door window frames for removable Lexan windows Optic Armor lexan front, rear, and quarter windows. Black painted boarders and riveted in All floor drain holes, quarter panel and firewall holes welded shut Tubbed transmission tunnel Misc brackets, seat belt holes, and etc removed and shaved Tube front and rear frame with jack point and crash bars Brackets for S14 Zenki front end conversion Origin 50mm rear wide body Rear quarter panels cut off and tubbed Type X style tail lights painted red and clear coated Custom printed vehicle wrap Countersteer race car body harness with Auto Rod switch panel. Constant and switch power fuse blocks Moroso battery kill switch Custom center dash plate Custom low seat brackets on driver side Sparco weld on quick release Custom steering shaft with adjustable roll cage mount, powder coated fire wall plate with uniball mount and weld on u-joint Moroso battery box and metal tie down Custom rear mount Mishimoto aluminum radiator, aluminum hard piping with silicone couplers and T bolt clamps (water wetter and distilled water) Flex-a-lite Black Magic single 15" fan flowing 3300 CFM FUEL CELL MOUNT (made for ATL 10 gallon fuel cell) Custom throttle cable assembly Steel rear firewall Lexan quarter panel air ducts for rear mount radiator Moroso hood pins up front Quick latch push button trunk latches High density foam padding around driver area Flocked dash with shaved defrost holes Quick door latch release cables Door straps for closing ASD hydro ebrake MOUNT welded to trans tunnel Countersteer power brace Front firewall covered in DEI heat tape Single wiper modification (covers full windshield) Custom power steering tank with AN hose/fittings Custom oil catch can with AN hose/fittings Modded front subframe to move rack forward over a inch Rebuild steering rack Poly rack bushings Solid rear subframe bushings 350Z side view mirrors with new glass Still have key for door locks, can lock car if door windows are installed Wilwood brake pedal box Custom hard brake lines throughout car Hydro ebrake hard line system Before part out:       Currently:                    
__________________
Always have something for sale, check my threads. Ships in 24hrs or less! |
|
|
| Sponsored Links |
 |
| Bookmarks |
|
|
Linear Mode
