S13 sr20det won't start - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

usafboyer041288 · 06-15-2016, 07:08 PM

So car turns over fine has plenty of gas flowing to the rail but won't start. Just constantly turns over. Get to looking under the hood to see if there are any connections I missed. Don't see any so look under the engine Fuze box and find that according to the diagram I'm missing either a relay or a 30amp fuse. Idk if it's suppose to be there though cause I don't see any wires or even a plug for a relay or a spot for a fuse. Please anybody

Sent from my SM-G930P using Tapatalk

xchaosx · 07-08-2016, 01:32 PM

I would check to see if you are getting power to your coils. Did you work on the harness yourself or is it a premade one?

cotbu · 07-08-2016, 02:37 PM

Your fuse box is normal, so check all fuses and test relays.
It would be relevant to mention if the engine has every started.

Head and or coil pack ground, have you check injectors for pulse or firing? Check the ecu for power, check spark, this is all common stuff to check when there's a no start situation, maybe there's too much fuel, I'd but there's thing to do when there is.

DiscountPirate · 07-18-2016, 02:18 PM

Yeah first time swap start or new problem would be good info to have. If first time obviously check the basics fuses, fuel, air, ignition. You can also jump starter. If everything checks out also make sure your clutch pedal sensor button is being depressed.

06-15-2016, 07:08 PM	#1
usafboyer041288 Zilvia Member Join Date: Sep 2012 Location: DYESS AFB TEXAS Age: 36 Posts: 170 Trader Rating: (1) Feedback Score: 1 reviews	S13 sr20det won't start So car turns over fine has plenty of gas flowing to the rail but won't start. Just constantly turns over. Get to looking under the hood to see if there are any connections I missed. Don't see any so look under the engine Fuze box and find that according to the diagram I'm missing either a relay or a 30amp fuse. Idk if it's suppose to be there though cause I don't see any wires or even a plug for a relay or a spot for a fuse. Please anybody Sent from my SM-G930P using Tapatalk

07-08-2016, 02:37 PM	#3
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 49 Posts: 3,318 Trader Rating: (3) Feedback Score: 3 reviews	Your fuse box is normal, so check all fuses and test relays. It would be relevant to mention if the engine has every started. Head and or coil pack ground, have you check injectors for pulse or firing? Check the ecu for power, check spark, this is all common stuff to check when there's a no start situation, maybe there's too much fuel, I'd but there's thing to do when there is. __________________ LoverTechnologies "Half Broken Things!"

07-08-2016, 01:32 PM	#2
xchaosx Leaky Injector Join Date: Aug 2003 Location: Bay area, CA Posts: 114 Trader Rating: (3) Feedback Score: 3 reviews	I would check to see if you are getting power to your coils. Did you work on the harness yourself or is it a premade one?

07-18-2016, 02:18 PM	#4
DiscountPirate Zilvia Member Join Date: Jul 2016 Location: SoCal Posts: 189 Trader Rating: (0) Feedback Score: 0 reviews	Yeah first time swap start or new problem would be good info to have. If first time obviously check the basics fuses, fuel, air, ignition. You can also jump starter. If everything checks out also make sure your clutch pedal sensor button is being depressed.