Wiring specialists? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AllThingsGravy · 05-01-2016, 10:41 AM

I'm having a problem with my sr20 and I don't really want to touch my wiring yet because I have little to no experience in finding shorts, etc... So I was looking for a little help. Anything helps thanks.

zombiewolf513 · 05-01-2016, 01:01 PM

http://multimeter-test.com/how-to-use-a-multimeter/

AllThingsGravy · 05-01-2016, 01:08 PM

Quote:

Originally Posted by zombiewolf513

http://multimeter-test.com/how-to-use-a-multimeter/

Yess , I know I'm plenty familiar with a multimeter lol but I just don't know where to start looking...

nizmo240z · 05-03-2016, 08:03 PM

Well I would try to get a wiring diagram so you can just unplug all the plugs then test for continuity at the main plug for engine computer to the sensors and injectors and so fourth. If all that checks out then you will have to pull the harness out and inspect all the wires with the wire loom all taken off and don't forget the grounds. If you can't get a wiring diagram then pull the harness all fallow each wire then test for continuity. Remember just cause the wire insulation looks fine doesn't mean that the wire is natural broken on the inside.

Rovch · 05-03-2016, 11:46 PM

It would help to know your exact location.

AllThingsGravy · 05-04-2016, 01:34 AM

Quote:

Originally Posted by Rovch

It would help to know your exact location.

Oh snap you're right, 91010

05-01-2016, 10:41 AM	#1
AllThingsGravy Zilvia Addict Join Date: Sep 2015 Location: Somewhere in Cali Age: 30 Posts: 612 Trader Rating: (2) Feedback Score: 2 reviews	Wiring specialists? I'm having a problem with my sr20 and I don't really want to touch my wiring yet because I have little to no experience in finding shorts, etc... So I was looking for a little help. Anything helps thanks.

05-03-2016, 08:03 PM	#4
nizmo240z Zilvia Member Join Date: May 2011 Location: ontario,ca Age: 46 Posts: 169 Trader Rating: (8) Feedback Score: 8 reviews	Wiring Well I would try to get a wiring diagram so you can just unplug all the plugs then test for continuity at the main plug for engine computer to the sensors and injectors and so fourth. If all that checks out then you will have to pull the harness out and inspect all the wires with the wire loom all taken off and don't forget the grounds. If you can't get a wiring diagram then pull the harness all fallow each wire then test for continuity. Remember just cause the wire insulation looks fine doesn't mean that the wire is natural broken on the inside. __________________ Black Magic

05-01-2016, 01:01 PM	#2
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 36 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	http://multimeter-test.com/how-to-use-a-multimeter/

05-03-2016, 11:46 PM	#5
Rovch Join Date: Mar 2013 Location: Temecula, SC Age: 30 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	It would help to know your exact location.