TX Built S14 SR20DET motor head and/block. will seperate.

[yingiang]

Call or Text: Yang 469-939-9264
like the title states, may or may not include extra stuff.
if you buy the built head, i'll throw in an extra stock head. Will come with vc.
the block may come with other stuff but i'll have to rummage around.
E-Mail: [email protected]
selling my built motor setup. got a complete swap and just going to use the stock motor instead

ALL PRICES ARE OBO!!!!!!!

Block:

-CP pistons .020 over sized and 8.5:1 Compression
-Eagle Rods
Machine Work:
block Bored out .020 over
block Honed
Head Decked
block Decked
block and head vatted to clean everything up
Polished drive shaft
balanced drive shaft
balanced pistons
balanced rods
clevite bearings (clearances measured and confirmed by machine shop)
Rings gaped by machine shop
-includes;
water pump
oil pump
oil pan
will need; oil pickup and baffle pan
oil dipstick with oil stick holder.

$2000obo

Head:

Valve springs and retainers installed
5 angle valve job
BC 264/264 camshafts brand new.
Supertech dual valve springs and Ti retainers.
-includes:
CAS
Headgasket apexi(copper sprayed but never installed)
extra head stock S14 SR
valve cover(1x)
ARP headstuds
vc gasket, cas gasket, spark plug gasket.
$1200obo

[yingiang]

Looking for :
i'll take trades plus cash on your end:

-or a decently running s13 coupe stock good condition with a/c
-Rear RUCA
-s14 origin type-2 wide body.
-F.I.A approved bucketseats.
-Zenki Headlights + corners has to be both in good condition i.e all tabs in tact
-decently aggressive/wide wheels 5 lug. 18s
-full steeringwheel setup which has to include:
nrg quick release (short)
and hub(short) for s14
350mm steering wheel
or just cash + cash on top =)

don't be afraid to make offers.

[JDS Performance]

Price CP pistons .020 over sized and 8.5:1 Compression?

[yingiang]

everything already sold