OH PARTOUT - Built S14 Zenki SR20det / Turbo Kit / AEM / Cwest / Fuel Cell + More

[Zerolift Autolab]

Hey Everybody
Robert at Zerolift here.
I have had my personal S14 listed for sale for a while now.
Unfortunately the time has come to start the part out.

Please if you are interested in anything - email me directly at -
[email protected]

FOR SALE :

Complete S14 Part Out - LONG LIST of Parts !


1995 Nissan 240sx SE
83,xxx Original On Chassis
Vehicle from Florida – No Rust !

ALL COMPONENTS UNDER 2500 MILES!

Engine - $3000
S13 SR20det Engine
Built Bottom End
JE Pistons 86.50 Bore
Manley Turbo Tuff Rods
ACL Race Bearings
OEM Oil Pump
OEM Water Pump
Greddy Pulley Kit
Greddy Oil Pan
Nismo Motor Mounts / Trans mount
Built Cylinder Head
BC Springs / Retainers
HKS Step 2 264 / 272 Camshafts
HKS Cam Gears
New Oem Timing Chain, Tensioner, and Guides
ARP Head Studs
Rocker Arm Stoppers

- Custom Catch Can setup – recirculated to oil pan + Earls Line & Fittings - $250
- Freddy Intake Manifold (Powdercoated Black) + Oem Throttle Body + IACV - $250

Fuel CELL - $1500
ATL 12 gal round Fuel Cell with In Tank Surge Box and Walbro 400lph Pump
(Mounted in trunk with Aluminum Surround for S14)
Electronic Level Sensor for Fuel Cell
Earls AN Fittings attached to tank
In Line Fuel Filter

Fuel Parts -
- HKS Top Feed Fuel Rail - $250 ( Discontinued item from HKS )
- Seimens Top Feed Fuel Injectors 660cc - $200
- SX Fuel Pressure Regulator - $100

Turbo Kit - $2500
Peak Boost Top Mount Manifold T3 w/ 44mm WG Flange
Garrett GT3071R - Polished and Ceramic Coated – V Band GT Outlet
Earls Stainless Braided Line
Earls AN Fittings
Tial 44mm Wastegate w/ External Dump Pipe
3" Stainless V Band Downpipe

Intercooler –
- 24x12x3 Intercooler + Aluminum Piping + Couplers / Clamps - $300
( Pipes for Greddy Type Intake Manifold / Top Mount Turbo + HKS Alum Flange)
- HKS RACE Blow Off Valve - $250

Exhaust -
- Apexi GT Spec Exhaust (GT spec goes from 3 up to 3.5 up to 3.75” diameter)
( SOLD SEPARATELY FROM TURBO KIT ) - $400

Cooling
- Koyo Aluminum Radiator - $150
- FAL Dual Electric Fans (operates on temp switch) - $200
- Carbing Trim Panel (between headlights) – Make Offer
- Aluminum Coolant Overflow Tank - $

Drivetrain
- Stock 5 Speed Transmission - $150
- Exedy Hyper Single Clutch Kit - $700
- Driveshaft Shop Aluminum Driveshaft - $250
- Kaaz 2 Way LSD / Complete Differential + Axles - $700


Suspension & Brakes :
- Apexi N1 EXV Coilovers - $600
- Wilwood Dynalite Front Brake Kit - $500
- Oem Rear Brake Calipers & Rotors - $
Power Slot Rear Rotors - $
Hawk Rear Pads - $
- Stainless Brake Lines Front & Rear - $
Oem Suspension Arms & Parts
- Front LCA - $
- Rear LCA - $
- Front Knuckles - $
- Rear Knuckles - $


Electronics
- AEM EMS Management System V1- $800
AEM Map Sensor
AEM Air Temp Sensor
- Engine Wire Harness – S13 SR into S14 - $150
(Wired for using MAP Sensor)
- Ignition Coils + Coil Pack Harness - $150
- Greddy Profec B Electronic Boost Controller - $200
- HKS Turbo Timer - $50
- Defi Gauge Link Controller - $100
- Defi BF Series Boost Gauge - $150
- Defi BF Series Oil Pressure Gauge - $150
- LCD in Dash CD Player with Carbon Trim Surround - $

Exterior
- Seibon DV Carbon Fiber Hood + Aerocatch Locking Hood Pins - $500
- Seibon Carbon Fiber Trunk Lid - $400
- Authentic C-West Aero Kit – Zenki S14 - $700
( NO CRACKS, Great Shape )
(trimmed rear bumper and added heat shield above exhaust)
- C-West Bumper Lights - - SOLD -
- Chargespeed 20mm Wide Front Fenders - $200
- Origin 50mm Rear Wide Fenders - $200
(Fuel door blended into quarter panel)
- Authentic Nissan Euro Zenki Glass Housing Headlights - $450 (pair)
- Origin Clear Side Corner Lights - SOLD -
- Left / Right Doors – $150 / Side

CHASSIS - $2000
Chassis prepared for Widebody Rear Fenders
Other than rear quarter work – ALL ORIGINAL
NO RUST !
2 Tone Paint Job - Black Body & Gunmetal Roof
(Paint is 7.5 of 10 I'd say)
New Windshield & Weather Stripping
New Weather Stripping on Rear Windshield

Wheels
Enkei RPF1 SBC Wheels 17x9.5 and 18x10.5 - SOLD -
(Current Cooper Tires 245 / 265 in decent shape)
(Rear wheels have a couple scrape marks from Tire Mounting / Dismounting)

Interior
- Recaro Profi XL Driver Seat (Expired FIA, In Great Shape) - SOLD
- Fixed Mount Seat Rail Driver Side S14 - $100
- Corbeau Forza Passenger Seat - $150
- Corbeau Passenger Floor Rail w Slider S14 - $80
- Corbeau 3" 5 point harnesses - $100 each
- Custom Molded Black Carpet (fits ok) - $100
- Autopower 4 point Bolt in Roll Bar - $400
- Origin Carbon Fiber Door Panels - $500 / Pair
(Trimmed to accept door handles and pull handles, also drilled speaker holes)
- Sparco "Ring" Suede Steering Wheel & Momo Hub - $200
- New Oem Shifter Console & Boot - $50
A- luminum Battery Box in Trunk - $
- Dashboard – Great Shape – A few small holes from Gauges above climate control -
- SE White Face Gauge Cluster - $100
- Sunroof Assembly – Fully Functional - $200
- Headliner – Make Offer
- Rear Speaker Deck Cover – Make Offer

MISC Items:
New OEM Full Key and Tumbler Set - Doors, Trunk, & Ignition - $300

* Please note there are a few parts I have not yet posted pricing for.
As well as there are a lot of Small Parts that I have not added to the list *

Most Parts can be shipped easily.
Please contact me if you are interested in anything.

Thank you
Robert
Email - [email protected]

[Hypnose S14]

I just emailed you

[Zerolift Autolab]

Email received and replied.
Thank you

[Raz83]

Still have the shifter console and boot would you ship if so how much to 32712
Also are you willing to ship the door panels?

[RalliartRsX]

information and pictures on the front brake kit? Thanks

[Zerolift Autolab]

Originally Posted by Raz83

Still have the shifter console and boot would you ship if so how much to 32712
Also are you willing to ship the door panels?

Yes I can ship - I believe you emailed me a bit earlier ?

Originally Posted by RalliartRsX

information and pictures on the front brake kit? Thanks

Sent a PM - Will Email you in the morning.

[feito]

roll bar pix?

[Raz83]

Check your email

[RalliartRsX]

Did you get those pics of the brake setup??

[slow_sr20]

Interested in clutch & brake pedal. Please pm me if they are available.

[Zerolift Autolab]

Originally Posted by feito

roll bar pix?

Sent you a PM

Originally Posted by Raz83

Check your email

Got it and replied

Originally Posted by RalliartRsX

Did you get those pics of the brake setup??

Sent you a photo today

Originally Posted by slow_sr20

Interested in clutch & brake pedal. Please pm me if they are available.

I will send a Pm today.

Thanks everybody

[Zerolift Autolab]

Thanks for the PM's & Emails
Replied to them all

[Supaflu225]

Please contact me ab door panels 2256508118.

[Zerolift Autolab]

Originally Posted by Supaflu225

Please contact me ab door panels 2256508118.

^^ Called and Emailed !
Thanks

Enkei Wheels - SOLD
Corner / Side Marker Lights - SOLD
Front Bumper Lights - SOLD

[Raz83]

Just emailed you again

[zdriverdre240sx]

Bump


Sent from my iPhone using Tapatalk

[Zerolift Autolab]

Emails / PM's replied.

Requested photos will be taken on monday.

[760GripReaper]

Pm sent!


Sent from my iPhone using Tapatalk - now Free

[Zerolift Autolab]

^ Received and replied !
Thanks

* Please for a faster response email me directly at the gmail address *

[Zerolift Autolab]

Keep the emails & pm's coming!
Thanks everybody
Robert

[JDMED OUT]

how much for the carbon fiber door panels?

[Zerolift Autolab]

Originally Posted by JDMED OUT

how much for the carbon fiber door panels?

Thanks for the interest.
Pricing posted in the ad is $500 for the pair of panels.
Thanks

[Driftzenki]

is the driveshaft for abs or non abs?

[Jesses14]

Aye bro can you hmu ASAP
I am very interested
9518018514

[Zerolift Autolab]

Recaro driver seat - SOLD

Driveshaft - S14 Non Abs

[blueshark123]

Roll bar price and brake pics and what is exactly included in the brake kit please. Also might buy fuel cell setup.

[Scherz Daddy]

I'm interested in the coilover setup. Any photos? All the spanner wrenches included? What are the spring rates?

[Cvworth]

Very very very interested in a lot of parts. If we can work something out I'll be able to drop a few hundred on you this week. I shot you an email.

[EatRice]

cant get my emails returned??

[email protected]

[Zerolift Autolab]

Emails / PM's replied to

Pete your email was filtered into junk mail for some reason.
Expect a reply shortly.