CA KA24DE S14 Parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mantas · 09-06-2013, 05:08 PM

My plans to rebuilt the engine fell through so parting out a complete KA24DE - ENGINE WAS RUNNING!!!

Make Offers - I ship ($5-$10 next day or 2 day FedEx) Everything is OBO.
Some things are not listed or pictured, just ask I might have whatever it is you are looking for.

Power Steering Pump (Not Sure if this one works) BOTH PUMPS SOLD
Complete 1995 240sx S14 Harness - SOLD
S14 Auto ECU - $20
Intake Manifold $20
Dizzy - SOLD
Cylinder Head - Rebuilt: machined, hot tanked, new stem seals, valves springs were all good - SOLD SOLD
Block - Decked, polished crank, all clearances checked - SOLD
Head Bolts OEM - $40
Main Bolts OEM - $20
Valve Cover - SOLD
Oil Pan - DISAPPEARED
New Pistons, rings, timing kit, and complete gasket set with 2 sets of bearings, water pump. -- timing cover sold, oil pump gasket sold.
OEM injectors and rail - SOLD
EGR valve / EGR Solenoid - $20 each or $30 for both.
Exedy Clutch - SOLD.

Located in SoCal Van Nuys / Sherman Oaks area where 101/405 meet.
(818) 279-five20eight

I have no idea about the quality of these bearings so do your own research. I was going to get a different set ACL, these are rod and main.

This shield is for an AUTOTRAGIC transmission.

THIS IS WHAT THE ENGINE LOOKED LIKE BEFORE IT WAS TAKEN APART FOR A GASKET REFRESH ETC.

ng26 · 09-15-2013, 02:49 PM

Interested in the starter, sending pm

mantas · 09-18-2013, 09:29 AM

Bump anyone need these ka parts?

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

mantas · 09-25-2013, 09:29 AM

Bump

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

WIKID S4TEEN · 09-25-2013, 09:52 AM

Where's LALALAND?

mantas · 09-25-2013, 10:01 AM

Quote:

Originally Posted by WIKID S4TEEN

Where's LALALAND?

Los Angeles. Van Nuys area.

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

mantas · 10-04-2013, 06:17 PM

Bump Bump pix / prices updated.

AzBrewsky · 10-04-2013, 08:32 PM

You have a PM.

mantas · 10-07-2013, 10:28 PM

Bump. Cylinder head oil pan valve cover harness are all pending.

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

mantas · 10-17-2013, 03:22 PM

Bump and grind...

Juantwo3 · 10-18-2013, 11:43 AM

the crank shaft sold?

In The Works · 10-18-2013, 12:24 PM

You need interested in anything for trade? Looking at the kit you have for $300

mantas · 10-18-2013, 12:28 PM

Quote:

Originally Posted by Juantwo3

the crank shaft sold?

Yup, block and crank are gone. Harness is gone too. Exedy clutch kit is sort of pending, i have like 4-5 people telling me they will pick it up this weekend or next week but first one gets it hahaha.

mantas · 10-18-2013, 12:30 PM

Quote:

Originally Posted by In The Works

You need interested in anything for trade? Looking at the kit you have for $300

I sold my s14 / KA Datsun, and decided to hold off on the whole drift missile idea, so i dont' really need any parts at the moment.

In The Works · 10-18-2013, 01:49 PM

Is that one of the ebay rebuild kits?

mantas · 10-22-2013, 09:47 AM

Yeah buddy....lol.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

mantas · 10-22-2013, 11:38 PM

Bump, more pix uploaded, hit me up if you need any of these, I can ship any of this stuff 1 day fedex for about $5-10.

mantas · 10-25-2013, 12:26 PM

Bump, clutch is pending and front cover is gone along with sump pick up and oil pan gasket.

Striker65 · 10-28-2013, 07:47 PM

Quote:

Originally Posted by mantas

Bump, clutch is pending and front cover is gone along with sump pick up and oil pan gasket.

Great guy and fast Shipping. Arrived today.

Free bump.

mantas · 10-29-2013, 09:02 AM

Thank you. I try hahah.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

mantas · 10-31-2013, 04:30 PM

BUMP Lots of stuff gone already but check in to see if i still have it. Updated the original post.

rebornS14 · 10-31-2013, 05:49 PM

how much for the head, head bolts and what was wrong with motor? why was the head decked?

mantas · 10-31-2013, 08:32 PM

Sorry only have the headbolts left. But the block was decked to the minimum and the head was machined so it would be a smooth surface but there was nothing at all wrong with the engine - in case someone else is wondering about the condition of the other parts.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

rebornS14 · 10-31-2013, 08:51 PM

Quote:

Originally Posted by mantas

Sorry only have the headbolts left. But the block was decked to the minimum and the head was machined so it would be a smooth surface but there was nothing at all wrong with the engine - in case someone else is wondering about the condition of the other parts.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

got it. thanks for the reply.

mantas · 10-31-2013, 09:02 PM

Np welcome.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

AzBrewsky · 12-03-2013, 05:29 PM

Free bump.. Not sure whats left, but the guy is legit.. I was the lucky one to get the block, crank and the head. It's all in my '95 now and running like a champ.

09-06-2013, 05:08 PM	#1
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	KA24DE S14 Parts My plans to rebuilt the engine fell through so parting out a complete KA24DE - ENGINE WAS RUNNING!!! Make Offers - I ship ($5-$10 next day or 2 day FedEx) Everything is OBO. Some things are not listed or pictured, just ask I might have whatever it is you are looking for. Power Steering Pump (Not Sure if this one works) BOTH PUMPS SOLD Complete 1995 240sx S14 Harness - SOLD S14 Auto ECU - $20 Intake Manifold $20 Dizzy - SOLD Cylinder Head - Rebuilt: machined, hot tanked, new stem seals, valves springs were all good - SOLD SOLD Block - Decked, polished crank, all clearances checked - SOLD Head Bolts OEM - $40 Main Bolts OEM - $20 Valve Cover - SOLD Oil Pan - DISAPPEARED New Pistons, rings, timing kit, and complete gasket set with 2 sets of bearings, water pump. -- timing cover sold, oil pump gasket sold. OEM injectors and rail - SOLD EGR valve / EGR Solenoid - $20 each or $30 for both. Exedy Clutch - SOLD. Located in SoCal Van Nuys / Sherman Oaks area where 101/405 meet. (818) 279-five20eight I have no idea about the quality of these bearings so do your own research. I was going to get a different set ACL, these are rod and main. This shield is for an AUTOTRAGIC transmission. THIS IS WHAT THE ENGINE LOOKED LIKE BEFORE IT WAS TAKEN APART FOR A GASKET REFRESH ETC. Last edited by mantas; 10-31-2013 at 04:32 PM.. Reason: Sold list updated

09-25-2013, 09:52 AM	#5
WIKID S4TEEN Zilvia Addict Join Date: Jan 2006 Location: SoCal 661 Posts: 887 Trader Rating: (4) Feedback Score: 4 reviews	Where's LALALAND? __________________ Rock wha U jock and don't talk if U ain't got!!

10-04-2013, 06:17 PM	#7
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Bump Bump Bump pix / prices updated.

10-17-2013, 03:22 PM	#10
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Bumpsky Bump and grind...

10-18-2013, 11:43 AM	#11
Juantwo3 Zilvia FREAK! Join Date: Sep 2011 Location: DTFullerton Age: 33 Posts: 1,103 Trader Rating: (20) Feedback Score: 20 reviews	the crank shaft sold? __________________ GO DUCKS!!!!!!!!!

09-15-2013, 02:49 PM	#2
ng26 Leaky Injector Join Date: Jan 2013 Location: I.E. Posts: 86 Trader Rating: (1) Feedback Score: 1 reviews	Interested in the starter, sending pm

09-18-2013, 09:29 AM	#3
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Bump anyone need these ka parts? Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

09-25-2013, 09:29 AM	#4
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Bump Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

10-04-2013, 08:32 PM	#8
AzBrewsky Leaky Injector Join Date: Aug 2009 Location: Chandler, AZ Age: 60 Posts: 62 Trader Rating: (2) Feedback Score: 2 reviews	You have a PM.

10-07-2013, 10:28 PM	#9
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Bump. Cylinder head oil pan valve cover harness are all pending. Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

10-18-2013, 12:24 PM	#12
In The Works Zilvia Junkie Join Date: Feb 2006 Location: Sasebo, Japan Posts: 527 Trader Rating: (17) Feedback Score: 17 reviews	You need interested in anything for trade? Looking at the kit you have for $300

10-18-2013, 01:49 PM	#15
In The Works Zilvia Junkie Join Date: Feb 2006 Location: Sasebo, Japan Posts: 527 Trader Rating: (17) Feedback Score: 17 reviews	Is that one of the ebay rebuild kits?

10-22-2013, 09:47 AM	#16
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Yeah buddy....lol. Sent from my SAMSUNG-SGH-I337 using Tapatalk

10-22-2013, 11:38 PM	#17
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Bump, more pix uploaded, hit me up if you need any of these, I can ship any of this stuff 1 day fedex for about $5-10.

10-25-2013, 12:26 PM	#18
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Bump, clutch is pending and front cover is gone along with sump pick up and oil pan gasket.

10-29-2013, 09:02 AM	#20
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Thank you. I try hahah. Sent from my SAMSUNG-SGH-I337 using Tapatalk

10-31-2013, 04:30 PM	#21
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	BUMP Lots of stuff gone already but check in to see if i still have it. Updated the original post.

10-31-2013, 05:49 PM	#22
rebornS14 Zilvia FREAK! Join Date: Jun 2008 Location: Cerritos, CA Posts: 1,358 Trader Rating: (13) Feedback Score: 13 reviews	how much for the head, head bolts and what was wrong with motor? why was the head decked? __________________

10-31-2013, 08:32 PM	#23
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Sorry only have the headbolts left. But the block was decked to the minimum and the head was machined so it would be a smooth surface but there was nothing at all wrong with the engine - in case someone else is wondering about the condition of the other parts. Sent from my SAMSUNG-SGH-I337 using Tapatalk

10-31-2013, 09:02 PM	#25
mantas Zilvia Addict Join Date: Feb 2011 Location: LALALAND Posts: 822 Trader Rating: (7) Feedback Score: 7 reviews	Np welcome. Sent from my SAMSUNG-SGH-I337 using Tapatalk

12-03-2013, 05:29 PM	#26
AzBrewsky Leaky Injector Join Date: Aug 2009 Location: Chandler, AZ Age: 60 Posts: 62 Trader Rating: (2) Feedback Score: 2 reviews	Free bump.. Not sure whats left, but the guy is legit.. I was the lucky one to get the block, crank and the head. It's all in my '95 now and running like a champ.