Ka24E cutout - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

humkidd707 · 07-23-2013, 05:09 PM

i have an 89 hatch Ka24E and when i get between 3500-4000 rpm's my car cuts out completely until i push in the clutch and let rpm's pass 3k what can it be??? someone help please getting tired of not knowing

OnTheChip · 07-24-2013, 09:52 AM

Check you MAF voltage. It should be above 1V at idle. If not, the ECU assumes the MAF is unreliable, uses the TPS and RPM to calculate injector pulse width, and sets a 3000rpm rev limit. Check the ECU for codes also.

07-23-2013, 05:09 PM	#1
humkidd707 Join Date: Feb 2013 Location: Kirksville, Missouri Age: 30 Posts: 5 Trader Rating: (0) Feedback Score: 0 reviews	Ka24E cutout i have an 89 hatch Ka24E and when i get between 3500-4000 rpm's my car cuts out completely until i push in the clutch and let rpm's pass 3k what can it be??? someone help please getting tired of not knowing

07-24-2013, 09:52 AM	#2
OnTheChip Zilvia Junkie Join Date: May 2013 Location: Burgaw, NC Posts: 317 Trader Rating: (0) Feedback Score: 0 reviews	Check you MAF voltage. It should be above 1V at idle. If not, the ECU assumes the MAF is unreliable, uses the TPS and RPM to calculate injector pulse width, and sets a 3000rpm rev limit. Check the ECU for codes also. __________________ NismotronicSA - Speed-Density Tuning for Nissans