FL Ton of nissan parts, Shed clean out!!!!!!! 56k no way

[fun2drive95]

bunch of random parts all prices are obo within reason, been away for awhile so let me know if my prices are to high or too low.

Thanks in advance for looking:




rear axles $50 for one $85 for 2:




Misc. a/c lines and evaporators $15:



(USDM s14 front marker light Left side only, $20)V



S14 powder coated valve cover with new gaskets (little scratch marks on rear top) $80:




New Felpro for KA head gasket $20



Stainless steel T-bolts
These are the sizes I have:

#2.5----2.25"-2.5"
#3------2.5"-3"
#3.25---2.9-3.25"
#3.75---3.5-3.75"
$3 a piece for 1-5, $2 for 5+





crossmember and misc. timing parts all for $50



Stock s14 fuel pump $10, battery tie down $3, stock ka injectors $15




s14 ka a/c compressor $40 spins freely



Prosport new in box a/f gauge $40




JDM s14 tails $230 firm






N60 maf with plug $45







prosport volt gauge $20



misc gauges, make offers on each one:





front seat belt out of a 97 s14 ( i bought it because mine stopped retracting, never installed it) $30



rx7 550cc injectors (top feed i believe) $70






2 manual ka/sr trannies, one on the left is shot only for parts (i believe part of a speed sensor and stock shifter), the one on the right is good (ka) (if i remember correctly only a slight grind in 3rd sometimes, comes with nismo clutch fork pivot bearing installed 30537-RS540)Clutch fork and T.O, bearing housing $300







manual tranny shift boot(s) $30



JDM black s14 gauges 0 miles, KM/h $60





S14 wiper cowl brand new $100





(1) driver side zenki corner light $25




manual speed sensor s13 $60







misc oil lines $10



New in box KA clutch kit minus T.O. bearing $50







more misc parts: mirror switch (s13) shock cover (rear?) $5





make me an offer on anything you see in this pic:



barely used KA 10.2mm plug wires $50, SR square maf plug $20,
very used s14 front seat belt $15, coolant temp sensor, in bung... $30, Single pillar pod $5, top mount fuel rail $40







New fuel pressure regulator $35





Hope you had as much fun reading this post as i did writing it. please keep all comments constructive.

thanks,
-mike
Text only-(972)-702-4401

Call only please(unless you have verizon lol)-(727)992-8207

*Shipping at buyers expense.*

[aalbert240]

Is the turbo timer harness for an apexi timer?

[fun2drive95]

It'll work with any turbo timer

[95zenkisr20]

why would anybody buy your jdm side marker lights for 85 when you can get them for 80 NEW

[fun2drive95]

Thanks for the heads up. In the first post I state that I have been hoarding parts for years vans was unsure what i should price them at. Everthing is also obo

[rangerjavi]

Interested in a few items, coils (but need to know if its for a 13 or not) crossmember (by itself though), and that one fpr with the guage you had it posted on tampa racing. Let me know if you pass through orlando as well anytime soon.

[fun2drive95]

Just looked it up and it seems that the fronts are interchangeable not the rears, sorry

[rangerjavi]

I already knew that :-) but I just wanted to know if they where just for an s13 or 14.

[fun2drive95]

Yeah sorry lol, they're off of an s14

[demetrius84]

is that crossmember a 5spd? and is that crossmember from a s14? if so how much. also does the clutch kit comes with a new pressure plate?

[fun2drive95]

Originally Posted by demetrius84

is that crossmember a 5spd? and is that crossmember from a s14? if so how much. also does the clutch kit comes with a new pressure plate?

it should be a 5 speed cross member. now s13 or s14 im not quite sure. it does have a "B" and and arrow in the bottom if it helps. the clutch is complete never taken out of their boxes pressure plate and clutch disk.



red tires, one clutch fan, turbo timer harness, motor/tranny mounts, trunk latch, and fuel pressure adapter are gone. Let's keep up this pace guys!!!

[ov1989]

Pm' d u sir...

[premaire]

Do you have rear diff cover for the 95 if so I am very interested please let me know also the ac lines

[fun2drive95]

No diff cover sorry, and the ac lines are from random kas srs and cas

[RB240zDET]

Do you have the sending unit for the gloshift water temp gauge?

[premaire]

Ok I will take the lines for the ka if you still have them.

[redline elite]

pm me me i want the kouki tail lights

[migzs14]

Does the cluster work? And if so how much shipped to 92841

[fun2drive95]

Originally Posted by RB240zDET

Do you have the sending unit for the gloshift water temp gauge?

still looking for it, i know i did...

Originally Posted by premaire

Ok I will take the lines for the ka if you still have them.

I assume you mean ac lines? im not sure which ones are from a ka and havent the foggiest how to ship them...

Originally Posted by redline elite

pm me me i want the kouki tail lights

pm'd

Originally Posted by migzs14

Does the cluster work? And if so how much shipped to 92841

It does, and $60 + $15 priority shipping to GARDEN GROVE CA 92841

[SharkMan]

You have pm sir

[shaggy0778]

I'll take the driveshaft mounts. I can pay shipping or I can Paypal you the money now and I will come pick them up on the 7th, whichever is better for you

Also, PM me lowest price for both of the boost gauges read in PSI

[demetrius84]

where are u located at. i also live in florida. if you are to far how much to shipped the clutch kit to fort laudaerdale.

[ze12o]

need some t bolt clamps
10-2.5"
5-2.25"ish

[paintkilz]

does the A/F gauge need a sensor?

[fun2drive95]

Originally Posted by shaggy0778

I'll take the driveshaft mounts. I can pay shipping or I can Paypal you the money now and I will come pick them up on the 7th, whichever is better for you

Also, PM me lowest price for both of the boost gauges read in PSI

PM'd

Originally Posted by demetrius84

where are u located at. i also live in florida. if you are to far how much to shipped the clutch kit to fort laudaerdale.

Im north of tampa so it would probably be better just to ship it. It should fit in a flat rate priority box for $15, that may be the best rate due to its weight. if you need i can search another way besides that.

Originally Posted by ze12o

need some t bolt clamps
10-2.5"
5-2.25"ish

These are the sizes I have:

#2.5----2.25"-2.5"
#3------2.5"-3"
#3.25---2.9-3.25"
#3.75---3.5-3.75"

PM me with how many you need of each one and ill give you a price shipped

Originally Posted by paintkilz

does the A/F gauge need a sensor?

It uses the stock one, and has the option to use a wideband (sold separately)

[fun2drive95]

navan wing, a few gauges, and driveshaft mounts are gone!!!

[Drewber2006]

I'll take the prosport A/F

[fun2drive95]

clutch fans are gone

[jr_ss]

All the corner lights for the Navan front end?

[fun2drive95]

yes they will^