Steering Angle Spacers! $50 shipped. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

maverickmotorsports · 05-05-2011, 10:50 AM

IN STOCK AND READY TO SHIP!

Hello Zilvia! I just got another run of these. Same price as before. These sell quick so buy asap!

These spacers easily add more angle to your steering! Check out the pictures below.

- Use on S13, S14, S15, Z32, R32, R33, Z33, G35, and probably a ton more Nissans.
- Machined from 4130 Chromoly
- Adds ~14º to your steering!
- CNC machined by a medical/aerospace certified machine shop
- Easy install. Re-center the rack after you install these.

Price: $50 Shipped.

You only need 1 per car. INSTALL ON PASSENGER SIDE.

I can ship international. PM me or email sil8ty@gmail(dot)com to order.

INSTALLED PICS!

I took some pics of my daily driver. ONLY ONE SPACER INSTALLED.

Alright. Finally got one of these on my daily driver. S13, stock suspension, stock steering.

BEFORE: 37º of steering angle stock.

AFTER: 51º of steering angle after adding only ONE spacer!

Added 14º of steering lock. You can grind down the steering stops and get even more.

I have a lot of people that can vouch for me. I'm also a moderator on az240sx.org so you guys can find me on there as well. Thank you for looking.

HS13KLS · 05-05-2011, 11:00 AM

On my s14 I had to take them off. I was using z32 inners, CS outters and PBM spacers.

WAY too much angle. and I had hella toe! Took off this spacer and everything was fine.

This does not go without saying I had insane angle, (rim was hitting the tension rod) at lock. even still with the z32 inners I had to take about 5-9 threads so I could correct my toe. - This was just my experience with them.

I hear they work great with all stock stuff though.

maverickmotorsports · 05-05-2011, 11:06 AM

Wow! I wonder if the CS outers are longer and force the car to have a lot of toe? With Z32 inners/stock outers you can run one on each side.

troskinatior · 05-05-2011, 12:14 PM

Can put regular spacers on these too?

TheRealSy90 · 05-06-2011, 06:01 AM

It's probably been asked before im sure but, how does it get the same amount of angle both ways with only one spacer? I have 9mm spacers on both tie rods already, how will that affect it?

clay9110 · 05-06-2011, 12:18 PM

U have to recenter the rack for it to affect both sides correctly.

MrFairlady · 05-06-2011, 05:44 PM

Ok so S13 with S14 LCA.....Z32 Tein Inners (w/ small spacer) and SPL outs.

Will that have any effect at all or these can be used with anything?

battlescar · 05-06-2011, 10:17 PM

what is your paypal? and would you recommand to have this and spacers on?

maverickmotorsports · 05-06-2011, 10:23 PM

Quote:

Originally Posted by TheRealSy90

It's probably been asked before im sure but, how does it get the same amount of angle both ways with only one spacer? I have 9mm spacers on both tie rods already, how will that affect it?

This is similar to adding one big spacer to the steering rack. You end up with more rack travel which means more angle.

Quote:

Originally Posted by MrFairlady

Ok so S13 with S14 LCA.....Z32 Tein Inners (w/ small spacer) and SPL outs.
Will that have any effect at all or these can be used with anything?

Depends on the SPL kit you have(the one for stock or modified knuckles). Should work but you might need to trim the pass side inner tie rod.

Quote:

Originally Posted by battlescar

what is your paypal? and would you recommand to have this and spacers on?

The threads are long enough that you could slip another spacer over this spacer....if that makes sense? haha

PM'd you the paypal info.

maverickmotorsports · 05-06-2011, 10:26 PM

I've had a few people ask me how to re-center the steering rack and here is a short write up.

Quote:

You put the spacer on the passenger side of the steering rack. Your rack now has extra travel but it's all biased to the passenger side(because of the spacer). In order to have equal alignment you need to center the steering rack.

This is done by turning the steering wheel lock to lock. Then you divide the total turns by 2. Now, from lock you rotate the steering wheel that much(ie: 3 turns lock to lock = 1.5 turns from lock to center). Once you have found center of travel simply realign the toe and you're all set.

Hope this clears up any questions. It's really simple to do and takes 30min-1hr at the most to install a spacer.

twinspool · 05-07-2011, 02:52 PM

what's your paypal info so I can get one of these?

k0013 · 05-08-2011, 08:31 AM

Ok, i will be the elephant in the room: so what happens if you install one spacer on each side.

TheRealSy90 · 05-08-2011, 10:26 AM

Quote:

Originally Posted by george

I've had a few people ask me how to re-center the steering rack and here is a short write up.

Hope this clears up any questions. It's really simple to do and takes 30min-1hr at the most to install a spacer.

Damn it all makes sense now haha, thanks.

maverickmotorsports · 05-09-2011, 10:32 AM

Down to about 10 of these. They are selling FAST!

battlescar · 05-11-2011, 05:42 AM

money sent!

Rock´n Rolla · 05-12-2011, 04:36 PM

how about if i put those spacer on each side. . . with stock Inner and outer rods ?? s14

maverickmotorsports · 05-12-2011, 05:24 PM

Quote:

Originally Posted by Rock´n Rolla

how about if i put those spacer on each side. . . with stock Inner and outer rods ?? s14

You'll have too much toe in. You will need Z32/Z33 inners if you want spacers on each side. I also don't recommend spacers on each side with stock knuckles. You will over-center before you run out of travel. This is not the case with 1 spacer though.

maverickmotorsports · 05-12-2011, 09:14 PM

ONLY 5 LEFT!

Going fastttttttt!

NISR20MO · 05-13-2011, 01:49 PM

PM me with payment info please. I'm ready to buy!

maverickmotorsports · 05-13-2011, 02:24 PM

All PM's replied to! Thank you guys for your continuing business.

motorsporttc · 05-13-2011, 05:30 PM

Money Sent!!!

motorsporttc · 05-19-2011, 02:29 PM

Have these been shipped out yet? have't seen a tracking number

maverickmotorsports · 05-19-2011, 03:27 PM

They were shipped earlier today. USPS doesn't provide tracking on smaller packages and their system sucks anyway.

Sorry it took me a while to ship out. I have a regular day job and sometimes I can't get to the PO before they close.

motorsporttc · 05-19-2011, 04:09 PM

No Problem just wondering if they were shipped can't wait to install

maverickmotorsports · 05-25-2011, 03:20 PM

Just got another batch of these IN STOCK! Last time I sold out in less than a week so don't miss out.

Please PM me or email me to place an order.

Audio Puppet · 05-26-2011, 12:39 PM

how often do you get the steering angle spacers in?

motorsporttc · 05-27-2011, 11:30 AM

Besides the OP just wanted to see if any customers have a review of these that purchased them? I received mine just haven't had time to install

maverickmotorsports · 05-30-2011, 10:17 AM

Quote:

Originally Posted by Audio Puppet

how often do you get the steering angle spacers in?

I will keep them making them as long as people still want to buy them. I usually make runs of 20 or 40 and they sell out really fast. I currently have ~35 in stock.

WYT R1CE · 06-07-2011, 06:16 AM

Do you still have any? I will paypal now.

PM me.

Audio Puppet · 06-29-2011, 11:05 AM

Can you PM me. I want to see if you have any left and you paypal info

05-05-2011, 10:50 AM	#1
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	Steering Angle Spacers! $50 shipped. IN STOCK AND READY TO SHIP! Hello Zilvia! I just got another run of these. Same price as before. These sell quick so buy asap! These spacers easily add more angle to your steering! Check out the pictures below. - Use on S13, S14, S15, Z32, R32, R33, Z33, G35, and probably a ton more Nissans. - Machined from 4130 Chromoly - Adds ~14º to your steering! - CNC machined by a medical/aerospace certified machine shop - Easy install. Re-center the rack after you install these. Price: $50 Shipped. You only need 1 per car. INSTALL ON PASSENGER SIDE. I can ship international. PM me or email sil8ty@gmail(dot)com to order. INSTALLED PICS! I took some pics of my daily driver. ONLY ONE SPACER INSTALLED. Alright. Finally got one of these on my daily driver. S13, stock suspension, stock steering. BEFORE: 37º of steering angle stock. AFTER: 51º of steering angle after adding only ONE spacer! Added 14º of steering lock. You can grind down the steering stops and get even more. I have a lot of people that can vouch for me. I'm also a moderator on az240sx.org so you guys can find me on there as well. Thank you for looking. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all Last edited by maverickmotorsports; 12-19-2013 at 11:08 AM..

05-05-2011, 11:06 AM	#3
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	Wow! I wonder if the CS outers are longer and force the car to have a lot of toe? With Z32 inners/stock outers you can run one on each side. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

05-06-2011, 05:44 PM	#7
MrFairlady Nissanaholic! Join Date: Mar 2007 Location: Fascination Street,N.C Age: 45 Posts: 1,701 Trader Rating: (31) Rides Gallery: MrFairlady Feedback Score: 31 reviews	Ok so S13 with S14 LCA.....Z32 Tein Inners (w/ small spacer) and SPL outs. Will that have any effect at all or these can be used with anything? __________________ z-tERty-2

05-09-2011, 10:32 AM	#14
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	Down to about 10 of these. They are selling FAST! __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

05-12-2011, 09:14 PM	#18
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	ONLY 5 LEFT! Going fastttttttt! __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

05-05-2011, 11:00 AM	#2
HS13KLS Zilvia FREAK! Join Date: Aug 2006 Location: Illinois/California Age: 34 Posts: 1,114 Trader Rating: (13) Feedback Score: 13 reviews	On my s14 I had to take them off. I was using z32 inners, CS outters and PBM spacers. WAY too much angle. and I had hella toe! Took off this spacer and everything was fine. This does not go without saying I had insane angle, (rim was hitting the tension rod) at lock. even still with the z32 inners I had to take about 5-9 threads so I could correct my toe. - This was just my experience with them. I hear they work great with all stock stuff though.

05-05-2011, 12:14 PM	#4
troskinatior Leaky Injector Join Date: Sep 2009 Location: Colorado Age: 33 Posts: 135 Trader Rating: (2) Feedback Score: 2 reviews	Can put regular spacers on these too?

05-06-2011, 12:18 PM	#6
clay9110 Leaky Injector Join Date: Oct 2008 Location: belleville, il Age: 32 Posts: 129 Trader Rating: (0) Feedback Score: 0 reviews	U have to recenter the rack for it to affect both sides correctly.

05-06-2011, 10:17 PM	#8
battlescar Join Date: Jul 2007 Location: duluth, mn Age: 41 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	what is your paypal? and would you recommand to have this and spacers on?

05-07-2011, 02:52 PM	#11
twinspool Zilvia Junkie Join Date: May 2006 Location: mississippi Posts: 349 Trader Rating: (7) Feedback Score: 7 reviews	what's your paypal info so I can get one of these?

05-08-2011, 08:31 AM	#12
k0013 Zilvia Member Join Date: Apr 2008 Location: Morrow Georgia Age: 43 Posts: 150 Trader Rating: (2) Feedback Score: 2 reviews	Ok, i will be the elephant in the room: so what happens if you install one spacer on each side.

05-11-2011, 05:42 AM	#15
battlescar Join Date: Jul 2007 Location: duluth, mn Age: 41 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	money sent!

05-12-2011, 04:36 PM	#16
Rock´n Rolla Join Date: Apr 2009 Location: pennsylvania Age: 36 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	how about if i put those spacer on each side. . . with stock Inner and outer rods ?? s14

05-13-2011, 01:49 PM	#19
NISR20MO Zilvia Junkie Join Date: Aug 2006 Location: Raleigh NC Age: 37 Posts: 490 Trader Rating: (29) Feedback Score: 29 reviews	PM me with payment info please. I'm ready to buy!

05-13-2011, 02:24 PM	#20
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	All PM's replied to! Thank you guys for your continuing business. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

05-13-2011, 05:30 PM	#21
motorsporttc Leaky Injector Join Date: Jul 2006 Location: Bay area Posts: 62 Trader Rating: (1) Feedback Score: 1 reviews	Money Sent!!!

05-19-2011, 02:29 PM	#22
motorsporttc Leaky Injector Join Date: Jul 2006 Location: Bay area Posts: 62 Trader Rating: (1) Feedback Score: 1 reviews	Have these been shipped out yet? have't seen a tracking number

05-19-2011, 03:27 PM	#23
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	They were shipped earlier today. USPS doesn't provide tracking on smaller packages and their system sucks anyway. Sorry it took me a while to ship out. I have a regular day job and sometimes I can't get to the PO before they close. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

05-19-2011, 04:09 PM	#24
motorsporttc Leaky Injector Join Date: Jul 2006 Location: Bay area Posts: 62 Trader Rating: (1) Feedback Score: 1 reviews	No Problem just wondering if they were shipped can't wait to install

05-25-2011, 03:20 PM	#25
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	Just got another batch of these IN STOCK! Last time I sold out in less than a week so don't miss out. Please PM me or email me to place an order. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

05-26-2011, 12:39 PM	#26
Audio Puppet Zilvia Member Join Date: Jun 2008 Location: south gate Age: 39 Posts: 256 Trader Rating: (6) Feedback Score: 6 reviews	how often do you get the steering angle spacers in?

05-27-2011, 11:30 AM	#27
motorsporttc Leaky Injector Join Date: Jul 2006 Location: Bay area Posts: 62 Trader Rating: (1) Feedback Score: 1 reviews	Besides the OP just wanted to see if any customers have a review of these that purchased them? I received mine just haven't had time to install

06-07-2011, 06:16 AM	#29
WYT R1CE Zilvia Junkie Join Date: Apr 2005 Location: global Posts: 441 Trader Rating: (0) Feedback Score: 0 reviews	Do you still have any? I will paypal now. PM me. __________________ Team Sumospeed

06-29-2011, 11:05 AM	#30
Audio Puppet Zilvia Member Join Date: Jun 2008 Location: south gate Age: 39 Posts: 256 Trader Rating: (6) Feedback Score: 6 reviews	Can you PM me. I want to see if you have any left and you paypal info