UT I'm don't with Nissan for a while sale. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wrxkyle · 02-05-2011, 03:12 PM

now focusing on my sti swapped bugeye, so everything i was going to use to build my monster 240 that is now sold has to go. also note some things in the pics already sold, if it's not listed in the thread it's not for sale. this includes the safcII, don't pm me about it anymore, it's gone.

All prices are obo and open to trades. please note i no longer have a nissan. I have an 04 sti.

bc 264 camshaft intake cam, good condition(don't know if it's new but it sure looks like it) (only 1, the other was trash and for an s13, got screwed by the seller), PRICE DROP $50 OBO
it's for an s14 but will work 100% in s13sr as well- verified by Brian Crower THEMSELVES in my other thread. pending local pickup

avcr that works perfectly but can't find map sensor if that's your hanging point i can get another, and the price will reflect that as these go for 300 complete and used in similar condition, $200 shipped obo
will take partial trade for 3port ebcs or EWG to run on the suby.

q45 ignitor chip for sr20det or q45(duh) upgrade to the stock sr ignitor chip and much more beefy/non-burn-outable.$25

5mm spacers OBO

somewhere around here i have an enthalpy ecu that does not work, car doesn't start with it. i'll try and look up what the tune was for, could just be that the tune had big injectors and i didn't, but don't know, obo. you could always send it into enthalpy to fix it up at the same time he does your new tune. due to the inability to test it i'm willing to let it go fairly cheap. it has no evidence of any kind of damage, no water damage, no burnt out components, nothing. enthalpy can do dual tunes now btw, one for race gas and one for pump!

interested in a snell approved helmet for time attack/auto x less than 5yrs old

for the suby i need sti 24mm adjustable rear sway bar and endlinks,
amber electronic gauges (boost, oilpress, wideband, egt... prosport, defi, stri, maddad, etc, sti gauge red-amber color)
turbo xs/aps/perrin tmic inter-cooler / silicone elbow
02-03 jdm sti hoodscoop splitter or zerosports or similar
jdm 3 piece grill
sti trunk spings
1200cc side feed injectors
hid projector housings (like from a tsx, s2000, etc, just housings/optics not ballast/bulbs)
pics to follow

pics: for sale pictures by wrxkyle - Photobucket

lainardisboss · 02-05-2011, 04:04 PM

greddy makes thick stuff man glws

va240dude · 02-05-2011, 04:48 PM

PM me pics of the HKS sidefeed, I might be interested if the price is right!

Spencer dougherty · 02-05-2011, 07:34 PM

how much for the afcII?

wrxkyle · 02-06-2011, 02:16 AM

read line 2!^^^ safc IS NOT FOR SALE!,it's already sold.

injectors sold!

still for sale/trade
avcr
greddy oilpan (don't starve that engine in the corners or boil your oil, larger capacity, baffles to prevent starvation, plus extra cooling fins to help with temps, it's a no brainer!) (not to mention it's pre-tapped for an oil temp sender so no need to buy a filter adapter plate that might leak)
q45 ignitor chip plug and play and a decent upgrade to the ignition system compared to the weak stock sr20 ignitor
spacers

wrxkyle · 02-07-2011, 10:20 PM

bump, great parts here guys

HPballer76 · 02-07-2011, 10:22 PM

what part of utah are you in? could use those spacers. they are four lug right?

wrxkyle · 02-08-2011, 12:44 AM

i'm in provo, utah. and yes they should be 4 lug as that's what my nissan had, i think they might do 5 lug too. but yah i think he had 5mm and then went to 25 when he put hte z32 calipers on.

HPballer76 · 02-10-2011, 07:48 AM

how far is that from west jordan? just moved out here a couple months ago...

wrxkyle · 02-10-2011, 07:37 PM

um, hour or so? google maps?

wrxkyle · 02-15-2011, 09:40 AM

do you want the spacers?

norcalslider · 02-15-2011, 02:05 PM

by chance you looking for a wrx/sti DP?

wrxkyle · 02-15-2011, 09:27 PM

actually i am looking for a bellmouth downpipe what do you have? i may just keep my downpipe and go ewg

norcalslider · 02-15-2011, 10:07 PM

i just got rid of my bellmouth and got a Perrin catted divorced DP only 2k miles on it

wrxkyle · 02-15-2011, 10:41 PM

no thanks can't use divorced on the 20gxt, wastegate flapper hits. i'm just going to go ewg i think, but thanks for the offer. thread's getting pretty clogged so just pm me.

norcalslider · 02-15-2011, 10:49 PM

oh yeah i cut the divorced piece off because of that and it was too long..i cant pm you for some reason

rebornS14 · 02-16-2011, 12:09 AM

he's "don't" with nissan lolz

wrxkyle · 02-22-2011, 07:30 PM

last bump before remaking the thread

02-05-2011, 03:12 PM	#1
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	I'm don't with Nissan for a while sale. now focusing on my sti swapped bugeye, so everything i was going to use to build my monster 240 that is now sold has to go. also note some things in the pics already sold, if it's not listed in the thread it's not for sale. this includes the safcII, don't pm me about it anymore, it's gone. All prices are obo and open to trades. please note i no longer have a nissan. I have an 04 sti. bc 264 camshaft intake cam, good condition(don't know if it's new but it sure looks like it) (only 1, the other was trash and for an s13, got screwed by the seller), PRICE DROP $50 OBO it's for an s14 but will work 100% in s13sr as well- verified by Brian Crower THEMSELVES in my other thread. pending local pickup avcr that works perfectly but can't find map sensor if that's your hanging point i can get another, and the price will reflect that as these go for 300 complete and used in similar condition, $200 shipped obo will take partial trade for 3port ebcs or EWG to run on the suby. q45 ignitor chip for sr20det or q45(duh) upgrade to the stock sr ignitor chip and much more beefy/non-burn-outable.$25 5mm spacers OBO somewhere around here i have an enthalpy ecu that does not work, car doesn't start with it. i'll try and look up what the tune was for, could just be that the tune had big injectors and i didn't, but don't know, obo. you could always send it into enthalpy to fix it up at the same time he does your new tune. due to the inability to test it i'm willing to let it go fairly cheap. it has no evidence of any kind of damage, no water damage, no burnt out components, nothing. enthalpy can do dual tunes now btw, one for race gas and one for pump! interested in a snell approved helmet for time attack/auto x less than 5yrs old for the suby i need sti 24mm adjustable rear sway bar and endlinks, amber electronic gauges (boost, oilpress, wideband, egt... prosport, defi, stri, maddad, etc, sti gauge red-amber color) turbo xs/aps/perrin tmic inter-cooler / silicone elbow 02-03 jdm sti hoodscoop splitter or zerosports or similar jdm 3 piece grill sti trunk spings 1200cc side feed injectors hid projector housings (like from a tsx, s2000, etc, just housings/optics not ballast/bulbs) pics to follow pics: for sale pictures by wrxkyle - Photobucket Last edited by wrxkyle; 03-05-2011 at 12:23 PM..

02-05-2011, 04:04 PM	#2
lainardisboss Zilvia Addict Join Date: Nov 2008 Location: 671/562 Posts: 879 Trader Rating: (4) Feedback Score: 4 reviews	greddy makes thick stuff man glws __________________ hafa' na mala go mu?

02-05-2011, 04:48 PM	#3
va240dude Post Whore! Join Date: Apr 2008 Location: 千葉県／Virginia/Under my 240 Age: 41 Posts: 2,833 Trader Rating: (161) Feedback Score: 161 reviews	PM me pics of the HKS sidefeed, I might be interested if the price is right! __________________ 180SXオタクだ!

02-06-2011, 02:16 AM	#5
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	read line 2!^^^ safc IS NOT FOR SALE!,it's already sold. injectors sold! still for sale/trade avcr greddy oilpan (don't starve that engine in the corners or boil your oil, larger capacity, baffles to prevent starvation, plus extra cooling fins to help with temps, it's a no brainer!) (not to mention it's pre-tapped for an oil temp sender so no need to buy a filter adapter plate that might leak) q45 ignitor chip plug and play and a decent upgrade to the ignition system compared to the weak stock sr20 ignitor spacers Last edited by wrxkyle; 02-07-2011 at 12:49 AM..

02-07-2011, 10:22 PM	#7
HPballer76 Zilvia Junkie Join Date: May 2008 Location: Greensboro N.C. Age: 31 Posts: 452 Trader Rating: (9) Feedback Score: 9 reviews	what part of utah are you in? could use those spacers. they are four lug right? __________________

02-05-2011, 07:34 PM	#4
Spencer dougherty Post Whore! Join Date: Feb 2007 Location: Santa Ana CA SideWays Performance 1(714)330-0021 Age: 40 Posts: 2,554 Trader Rating: (65) Rides Gallery: Spencer dougherty Feedback Score: 65 reviews	how much for the afcII?

02-07-2011, 10:20 PM	#6
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	bump, great parts here guys

02-08-2011, 12:44 AM	#8
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	i'm in provo, utah. and yes they should be 4 lug as that's what my nissan had, i think they might do 5 lug too. but yah i think he had 5mm and then went to 25 when he put hte z32 calipers on.

02-10-2011, 07:48 AM	#9
HPballer76 Zilvia Junkie Join Date: May 2008 Location: Greensboro N.C. Age: 31 Posts: 452 Trader Rating: (9) Feedback Score: 9 reviews	how far is that from west jordan? just moved out here a couple months ago... __________________

02-10-2011, 07:37 PM	#10
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	um, hour or so? google maps?

02-15-2011, 09:40 AM	#11
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	do you want the spacers?

02-15-2011, 02:05 PM	#12
norcalslider Zilvia Member Join Date: Jan 2011 Location: reno Posts: 158 Trader Rating: (1) Feedback Score: 1 reviews	by chance you looking for a wrx/sti DP?

02-15-2011, 09:27 PM	#13
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	actually i am looking for a bellmouth downpipe what do you have? i may just keep my downpipe and go ewg

02-15-2011, 10:07 PM	#14
norcalslider Zilvia Member Join Date: Jan 2011 Location: reno Posts: 158 Trader Rating: (1) Feedback Score: 1 reviews	i just got rid of my bellmouth and got a Perrin catted divorced DP only 2k miles on it

02-15-2011, 10:41 PM	#15
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	no thanks can't use divorced on the 20gxt, wastegate flapper hits. i'm just going to go ewg i think, but thanks for the offer. thread's getting pretty clogged so just pm me.

02-15-2011, 10:49 PM	#16
norcalslider Zilvia Member Join Date: Jan 2011 Location: reno Posts: 158 Trader Rating: (1) Feedback Score: 1 reviews	oh yeah i cut the divorced piece off because of that and it was too long..i cant pm you for some reason

02-16-2011, 12:09 AM	#17
rebornS14 Zilvia FREAK! Join Date: Jun 2008 Location: Cerritos, CA Posts: 1,358 Trader Rating: (13) Feedback Score: 13 reviews	he's "don't" with nissan lolz

02-22-2011, 07:30 PM	#18
wrxkyle Leaky Injector Join Date: Oct 2009 Location: UT Posts: 80 Trader Rating: (1) Feedback Score: 1 reviews	last bump before remaking the thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode