CA RARE! Hippo Sleek Vip-style Front Table for S14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Teknolust72 · 12-03-2009, 11:48 PM

Another rare JDM item in my collection. I've had this front table sitting in storage for about 4 years, hoping to build a VIP-styled S14 (i.e. Supermade, 326 power), but now it looks like it will never happen.

Authentic front table from Hippo Sleek Japan. Of course its designed for RHD cars, but I had the legs switched from left to right so that it will fit for LHD. I did a quick mock up after that to make sure it would fit, and it does. After the mock up, it went straight into storage, and was never completely finished.

This particular table style is the only brand that could ever be reversed to fit for LHD since the top is perfectly symmetrical. Most other brands have the cup holders off to one side, and when its installed in a LHD car, the cup holders hit the door. This item was discontinued from Hippo Sleek a couple years ago, so its definitely rare to find.

It requires 2 things to be done so that it can be used - the legs need to be painted (or laminated), and the top needs to be attached to the legs. THATS IT!! Comes with the Japanese instructions, bolts, coasters that go under the cup holder openings, and a Hippo Sleek decal.

Asking $200 picked up, $220 shipped.

Located in SoCal (Torrance, CA). PM me or email [email protected] for a faster response.

Thanks guys!!

The portion of the legs that need to be painted:

Stock photo from Hippo Sleek website:

dOMEmE · 12-04-2009, 01:15 AM

do you know if this will fit a s13?

***enkei2k*** · 12-04-2009, 08:13 AM

...that, to me at least, is full of awesomeness

1kuo · 12-04-2009, 08:59 AM

that thing is badass

Duce40KAT · 12-04-2009, 11:34 AM

Hate to call you out dome. but that is a s13.

thursdaymike · 12-04-2009, 12:20 PM

duce, what r u talking about. I hope not that pic. i know my s13 doesnt hace a/c vents in the doors lol. This probably would not fit an s13 IMO!!
Clean piece of jdm rareness, glws!!!!!!!

Max_PSi · 12-04-2009, 02:31 PM

What do you remove the glove box to install it? Or does it mount up with just the box in the open position?

JEDIs13 · 12-04-2009, 02:55 PM

Quote:

Originally Posted by Duce40KAT

Hate to call you out dome. but that is a s13.

you sir. are a complete idiot

Duce40KAT · 12-04-2009, 03:56 PM

Yea cause you changed the picture. I Seen the ashtray on the console. not under the stereo. can fool them. But i know what picture i seen.

Duce40KAT · 12-04-2009, 03:57 PM

Cause if you wanna get technical. You dound out that i was right and you edited it about lets say... 7 mins after i said that. Now WHO is the idiot

JEDIs13 · 12-04-2009, 04:00 PM

Quote:

Originally Posted by Duce40KAT

Cause if you wanna get technical. You dound out that i was right and you edited it about lets say... 7 mins after i said that. Now WHO is the idiot

how the fuck could i change the pic. im not the OP.
yet again another reason you are a complete idiot

Duce40KAT · 12-04-2009, 04:05 PM

not you. wow. Whatever. Guy changed his pic. I know it was an S13

Genovese.Jr · 12-04-2009, 04:10 PM

Quote:

Originally Posted by JEDIs13

how the fuck could i change the pic. im not the OP.
yet again another reason you are a complete idiot

got his ass

Duce40KAT · 12-04-2009, 04:12 PM

Lol. Got me, If you would have been in here earlier today like i was. You would have seen It wasn't a Automatic car there Originally was a 5 speed pictured. and it wasn't an s14. I work on s13's and s14s everyday i think i know where the ashtray is supposed to be, And if your just protecting your buddy thats cool. But i know i was right and if the Op would admit it You would know too. cause i mean its kinda strange he edited about 7 mins after i posted that.

Duce40KAT · 12-04-2009, 04:17 PM

and if you would look at the Update. and WHY he Edited Maybe you wouldn't feel so stupid right now. " CORRECT PICTURES "

PhilipJdm · 12-04-2009, 04:33 PM

wow sick table. woldnt mind one of those in my 13 but thats for a 14 =/

amdnivram · 12-04-2009, 04:46 PM

bump for something very convenient

XxDarkSidexX · 12-04-2009, 05:14 PM

that is a sick piece

clean

Teknolust72 · 12-04-2009, 05:25 PM

I vouch for Duce40KAT - I had a picture up for S13 by mistake, and put up a S14 instead.

Sorry Duce for all the heat you took....

-----------------------------------------

As for installation, you do not have to remove the glove box to install this. It can be removed if wanted, but the table has the hook so that you can close the glove box over the hardware for cleaner installation

Tantwoforty · 12-04-2009, 05:54 PM

this thing is the sex...

Max_PSi · 12-04-2009, 06:20 PM

Thanks for clearing the installation part up. I won't know until this weekend whether I can swing this or not, but I'll PM you when I do know.

dOMEmE · 12-04-2009, 08:34 PM

Quote:

Originally Posted by JEDIs13

you sir. are a complete idiot

Quote:

Originally Posted by JEDIs13

how the fuck could i change the pic. im not the OP.
yet again another reason you are a complete idiot

LOL....thanks for getting my back =]

and damn i wish this would have fit a s13, would have been gone so fast.

st350z · 12-04-2009, 09:58 PM

That thing is insane!!!
free bump for you my man..lol

Duce40KAT · 12-05-2009, 09:09 AM

HIPPO SLEEK Æ’â€*Æ’jÆ’IÆ’â€œÆ’vÆ’ÂÆ’_Æ’NÆ’g

Max_PSi · 12-05-2009, 10:06 AM

Quote:

Originally Posted by Duce40KAT

HIPPO SLEEK Æ’â€*Æ’jÆ’IÆ’â€œÆ’vÆ’ÂÆ’_Æ’NÆ’g

Holy shit bro, we get it you were right.........lol

TommyBoy89 · 12-05-2009, 10:26 AM

That is epic win...

Duce40KAT · 12-05-2009, 10:42 AM

Lol. i just wanted to make my point. Plus FTW it can be put on an s13 So wanted to make that known also.

Teknolust72 · 12-05-2009, 01:52 PM

Quote:

Originally Posted by Duce40KAT

Lol. i just wanted to make my point. Plus FTW it can be put on an s13 So wanted to make that known also.

To fit on S13 would require different legs to be made. I guess if someone wanted to redo the legs then, yes, its possible......

JEDIs13 · 12-05-2009, 03:35 PM

Quote:

Originally Posted by dOMEmE

LOL....thanks for getting my back =]

and damn i wish this would have fit a s13, would have been gone so fast.

you know i got you babygirl

glad to see your not pinked anymore

wow-thats-a-cool-car · 12-05-2009, 06:08 PM

stop parting out your car bernard!!!

12-03-2009, 11:48 PM	#1
Teknolust72 Nissanaholic! Join Date: Mar 2005 Location: SoCal Posts: 1,748 Trader Rating: (40) Feedback Score: 40 reviews	RARE! Hippo Sleek Vip-style Front Table for S14 Another rare JDM item in my collection. I've had this front table sitting in storage for about 4 years, hoping to build a VIP-styled S14 (i.e. Supermade, 326 power), but now it looks like it will never happen. Authentic front table from Hippo Sleek Japan. Of course its designed for RHD cars, but I had the legs switched from left to right so that it will fit for LHD. I did a quick mock up after that to make sure it would fit, and it does. After the mock up, it went straight into storage, and was never completely finished. This particular table style is the only brand that could ever be reversed to fit for LHD since the top is perfectly symmetrical. Most other brands have the cup holders off to one side, and when its installed in a LHD car, the cup holders hit the door. This item was discontinued from Hippo Sleek a couple years ago, so its definitely rare to find. It requires 2 things to be done so that it can be used - the legs need to be painted (or laminated), and the top needs to be attached to the legs. THATS IT!! Comes with the Japanese instructions, bolts, coasters that go under the cup holder openings, and a Hippo Sleek decal. Asking $200 picked up, $220 shipped. Located in SoCal (Torrance, CA). PM me or email [email protected] for a faster response. Thanks guys!! The portion of the legs that need to be painted: Stock photo from Hippo Sleek website: __________________ Last edited by Teknolust72; 12-04-2009 at 11:41 AM.. Reason: updated correct pictures

12-04-2009, 01:15 AM	#2
dOMEmE Nissanaholic! Join Date: Mar 2009 Location: LBC Age: 36 Posts: 2,280 Trader Rating: (20) Feedback Score: 20 reviews	do you know if this will fit a s13? __________________ Chupas!

12-04-2009, 08:13 AM	#3
*enkei2k* Super Moderator Join Date: Jul 2007 Location: over the river and through the woods Age: 39 Posts: 7,160 Trader Rating: (29) Feedback Score: 29 reviews	...that, to me at least, is full of awesomeness __________________ Ask enkei2k xquizitditz

12-04-2009, 05:25 PM	#19
Teknolust72 Nissanaholic! Join Date: Mar 2005 Location: SoCal Posts: 1,748 Trader Rating: (40) Feedback Score: 40 reviews	I vouch for Duce40KAT - I had a picture up for S13 by mistake, and put up a S14 instead. Sorry Duce for all the heat you took.... ----------------------------------------- As for installation, you do not have to remove the glove box to install this. It can be removed if wanted, but the table has the hook so that you can close the glove box over the hardware for cleaner installation __________________

12-05-2009, 06:08 PM	#30
wow-thats-a-cool-car Post Whore! Join Date: Mar 2008 Location: California Posts: 2,663 Trader Rating: (6) Feedback Score: 6 reviews	stop parting out your car bernard!!! __________________

12-04-2009, 08:59 AM	#4
1kuo Zilvia Member Join Date: Aug 2008 Location: SoCal Posts: 203 Trader Rating: (6) Feedback Score: 6 reviews	that thing is badass

12-04-2009, 11:34 AM	#5
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Hate to call you out dome. but that is a s13.

12-04-2009, 12:20 PM	#6
thursdaymike Leaky Injector Join Date: May 2007 Location: s. tx Posts: 141 Trader Rating: (5) Feedback Score: 5 reviews	duce, what r u talking about. I hope not that pic. i know my s13 doesnt hace a/c vents in the doors lol. This probably would not fit an s13 IMO!! Clean piece of jdm rareness, glws!!!!!!!

12-04-2009, 02:31 PM	#7
Max_PSi Zilvia Junkie Join Date: Aug 2005 Location: NY Age: 45 Posts: 480 Trader Rating: (10) Rides Gallery: Max_PSi Feedback Score: 10 reviews	What do you remove the glove box to install it? Or does it mount up with just the box in the open position?

12-04-2009, 03:56 PM	#9
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Yea cause you changed the picture. I Seen the ashtray on the console. not under the stereo. can fool them. But i know what picture i seen.

12-04-2009, 03:57 PM	#10
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Cause if you wanna get technical. You dound out that i was right and you edited it about lets say... 7 mins after i said that. Now WHO is the idiot

12-04-2009, 04:05 PM	#12
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	not you. wow. Whatever. Guy changed his pic. I know it was an S13

12-04-2009, 04:12 PM	#14
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Lol. Got me, If you would have been in here earlier today like i was. You would have seen It wasn't a Automatic car there Originally was a 5 speed pictured. and it wasn't an s14. I work on s13's and s14s everyday i think i know where the ashtray is supposed to be, And if your just protecting your buddy thats cool. But i know i was right and if the Op would admit it You would know too. cause i mean its kinda strange he edited about 7 mins after i posted that.

12-04-2009, 04:17 PM	#15
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	and if you would look at the Update. and WHY he Edited Maybe you wouldn't feel so stupid right now. " CORRECT PICTURES "

12-04-2009, 04:33 PM	#16
PhilipJdm Leaky Injector Join Date: May 2009 Location: so cal Posts: 146 Trader Rating: (0) Feedback Score: 0 reviews	wow sick table. woldnt mind one of those in my 13 but thats for a 14 =/

12-04-2009, 05:14 PM	#18
XxDarkSidexX Leaky Injector Join Date: Feb 2008 Location: socalif Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	that is a sick piece clean

12-04-2009, 05:54 PM	#20
Tantwoforty Nissanaholic! Join Date: May 2009 Location: Riverside ca Age: 34 Posts: 1,890 Trader Rating: (20) Feedback Score: 20 reviews	this thing is the sex...

12-04-2009, 06:20 PM	#21
Max_PSi Zilvia Junkie Join Date: Aug 2005 Location: NY Age: 45 Posts: 480 Trader Rating: (10) Rides Gallery: Max_PSi Feedback Score: 10 reviews	Thanks for clearing the installation part up. I won't know until this weekend whether I can swing this or not, but I'll PM you when I do know.

12-04-2009, 09:58 PM	#23
st350z Zilvia Addict Join Date: Jun 2007 Location: FL Posts: 634 Trader Rating: (16) Feedback Score: 16 reviews	That thing is insane!!! free bump for you my man..lol

12-05-2009, 09:09 AM	#24
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	HIPPO SLEEK Æ’â€*Æ’jÆ’IÆ’â€œÆ’vÆ’ÂÆ’_Æ’NÆ’g

12-05-2009, 10:26 AM	#26
TommyBoy89 Leaky Injector Join Date: Apr 2007 Location: Ont. Canada Posts: 149 Trader Rating: (0) Feedback Score: 0 reviews	That is epic win...

12-05-2009, 10:42 AM	#27
Duce40KAT Leaky Injector Join Date: Aug 2009 Location: Greenville, SC Age: 34 Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	Lol. i just wanted to make my point. Plus FTW it can be put on an s13 So wanted to make that known also.