OK Sr Part Out

[Gjohnson7]

Alright guys, I need to start clearing some of this stuff out of my garage and start making some money toward my rebuild. I have lots of SR parts so let me know what you need.

Looking for cash, but might be interested in trading for coilovers
Buyer pays shipping.

I've got:
Complete Sr Head Sold!
Greddy RSPL Front mount intercooler Sold!
Sr Tranny $300
2 Sr block $200
2 Sr Cranks (just needs to be grounded and polished) Sold! and $150 for the 1 that needs work
Upper oil pan
Lower oil pan
stock pistons and rods
Valves
valve springs
2 SR valve covers $75 a peice
3in turbo elbow Sold!
3in Test Pipe sold!
3in downpipe sold!
stock intake manifold
stock turbo elbow $10
Apex'i JDM Hybrid Megaphone Cat-back Exhaust for S13's $400 (Mounted but never driven with)
Sr T25 $150
Sr ECU Sold!
Sr wire Harness sold!
Sr stock fuel injectors
Sr stock clutch
Sr stock flywheel

Sr CAS $90 shipped
Sr Ignition Coils $100 shipped
Sr Ignitor Chip (Plastic has a crack in it, but works fine) $65 shipped
SARD R2D2 blow off valve $90 shipped
Sr Starter $45 shipped

Plenty more, just ask and I will check.

Please email me at [email protected]
\













Updated pics for new and some old items!

[traxx07]

PMed......oops cant PM u but i want the ecu shipped to 78221 lmk got paypal ready u sure it works?

edit- also need the turbo outlet elbow...and hot pipe if ur willing to seperate...

[DALAZ_68]

what kind of turbo elbow is that...!


actually whats the condition on the turbo and would u sell is wiht only the elbow and inlet and out let

[Gjohnson7]

The ECU should be working fine. The ECU comes out of my project car which had rod knock on the SR when I bought it. The previous owner drove the car for 2 years without problems and when I swapped in the longblock I purchased the ECU worked fine and the car started right up. Other than that I have no other experience with the ECU. LMK Shipping will probably be around $10.

Originally Posted by traxx07

PMed......oops cant PM u but i want the ecu shipped to 78221 lmk got paypal ready u sure it works?

edit- also need the turbo outlet elbow...and hot pipe if ur willing to seperate...

The Turbo elbow is Edge racing sports. It looks identical to the Megan Racing one. I will keep you posted on the elbow, someone else has already offered to by it via email. The turbo is in good condition, has minimal amount of shaft play. Please explain you other question. Are you talking about the manifold its attached to in the pic?

Originally Posted by DALAZ_68

what kind of turbo elbow is that...!


actually whats the condition on the turbo and would u sell is wiht only the elbow and inlet and out let

[traxx07]

so 60 shipped? ill send asap whats ur paypal? and on the other parts i asked about?

[Nismors14]

i need the knock sensor

[cotbu]

Payment sent!

[ep9716]

Damn I Really Want That SR Block But Im all the way in Atlanta.

[traxx07]

Payment sent.... can i get some kind of confirmation that you have recieved pmt when u shipping and lmk when u get the tracking number...

[Gjohnson7]

Sorry, it took so long. I got payment and will ship asap and provide tracking.

Originally Posted by traxx07

so 60 shipped? ill send asap whats ur paypal? and on the other parts i asked about?

[Gjohnson7]

Turbo elbow is sold. Not willing to part the intercooler kit yet.

Originally Posted by traxx07

edit- also need the turbo outlet elbow...and hot pipe if ur willing to seperate...

[Gjohnson7]

knock sensor will be $20 shipped.

Originally Posted by Nismors14

i need the knock sensor

You can have it.

Originally Posted by ep9716

Damn I Really Want That SR Block But Im all the way in Atlanta.

[Gjohnson7]

allright. All purchased items have baan shipped out. will provide tracking numbers later on. (pretty dificult to do from my G1)

plenty of items left guys!

[traxx07]

how much would the fmic kit be shipped?

[Gjohnson7]

Originally Posted by traxx07

how much would the fmic kit be shipped?

fmic kit will run about $25 in shipping. Sorry, the price above included the Sard blow off valve as well. I would do $425 shipped for just the Intercooler kit and $500 shipped with the blow off valve. Let me know.

[traxx07]

will let u know should be getting my college check in ... ha ha but do u got my tracking number?

Edit-- NVM just got email.. ha ha

[nismostate]

do you have coil pack harness?

[moses]

Do you have an exaust cam I can buy?

[jdmchuckiwill]

is that the head thats wrapped in the plastic?
is it a redtop right?
is it the 13 14 or 15

[Gjohnson7]

I am including the coil pack harness with the full harness that's up for sale.

Originally Posted by nismostate

do you have coil pack harness?

I am including cams with the Head for sale.

Originally Posted by moses

Do you have an exaust cam I can buy?

Yes that head was returned to me wrapped in plastic from the Machine shop. It hasn't been modified or machined they jsut replaced the valve seals with new ones and vaccuum tested it. Yes Retop, unsure about 12 ,14 or 15.

Originally Posted by jdmchuckiwill

is that the head thats wrapped in the plastic?
is it a redtop right?
is it the 13 14 or 15

[Gjohnson7]

Hey guys. I forgot to add I might be interested in doing some trading for coilovers.

[Gjohnson7]

1 Crank sold, still have 1 left. Will be trying to repond to other request later today. Sorry, I'm coaching a basketball tournament this weekend as well.

[Gjohnson7]

Sr Head is now sold.

[chituntang]

The SR harness is not converted or what? What ecu does it use?

Thanks
Jesse

[Gjohnson7]

Sr harnes was converted to lhd. Finally got around to taking a pic of it. Used Sr ECU with 62 sticker.

Originally Posted by chituntang

The SR harness is not converted or what? What ecu does it use?

Thanks
Jesse

[traxx07]

ill give u 350 for FMIC w/no blow off valve? sorry if lowball

[Gjohnson7]

Ok, I had a couple of pic requests for downpipe, testpipe and exhaust so take a look.

[traxx07]

Originally Posted by traxx07

ill give u 350 for FMIC w/no blow off valve? sorry if lowball

if thats too low can u PM me with a quote with shipping? thanks

oh and do u have that part i need?

[LA_phantom_240]

Any problems with the turbo?

[Gjohnson7]

No, the turbo is in good condition. It does have some shaft play, but nothing extreme.