CA 09 Nissan 370Z Drift/Track Spec

[DamianN.]

2009 Nissan 370z

Base model
80,545 miles
Color: Monterey Blue
Clean title
Just passed smog
Tags good until Feb 2021

Located: San Francisco

SOLD

Purchased car from dealership in Feb 2018 with 77,500. My goal was to build a super reliable drift/track car that could be driven back and forth to the track. There's over $10k in parts and have less than 3k miles on them all. Sad to see this go but downsizing my car collection.

Suspension:

• PartShopMax Pro coilovers (18kg front, 8kg rear)
• Voodoo13 rear camber arms
• Voodoo13 rear toe arms
• Voodoo13 rear tension arms
• Hotchkis Front and Rear adjustable sway bars

Drivetrain:

• SouthBend Stage 2 clutch
• SouthBend Lightweight Chromoly flywheel
• B&M short shifter
• New 6 speed transmission (#320B0-1EA0A) - There was nothing wrong with the old one just got a killer deal on the new one.
• ZSpeed CMAK Clutch Slave Delete
• Z1 motorsports solid Engine and Tranny mounts
• Z1 motorsports solid Diff Bushings, Subframe Bushings
• Kaaz 2 Way LSD (installed with new OEM bearings and races)
• Z1 Extra capacity diff cover

Brakes:

• ASD Hydro hand brake (Wilwood reservoir)
• KoruWorks dual caliper brackets with OEM calipers (Red Stuff brake pads)
• Stoptech brake pads and rotors (Front and Rear)

Interior:

• 2X Sparco Evo 2 US seats (up to 36 waist)
• 2X low mount seat brackets (non-sliding)
• Sparco steering wheel (w/ Boss hub, Airbag resistor, DND Quick release)
• Stätus 5 point harnesses with chassis plates
• MA Motorsports Harness bar
• We are like wise heavy shift knob & extension

Wheels:

• Cosmis XT-206r 18x9.5 +12 (square)
• Accelera PHI 265/35ZR18

Other:

• Cusco tow hook
• Greddy RS stainless catback exhuast (w/ burnt titanium tip)
• Setrab 13 row Power steering cooler (w/ Setrab fans)
• Setrab 25 row Oil cooler (w/ Setrab fans)
• K&N intakes (Cali CARB certified)
• OEM JDM Fog light
• UpRev ARC license (mail-in reflash by Z1 motorsports)
• Optima Yellow Top battery
• Nismo blue tint mirrors
• Gas hood struts
• LED license plate light assembly
• Powder coated lots of OEM brackets under the car
• CJ Motorsports billet fuel pump hat kit
• CJ Motorsports fuel tap with fuel pressure gauge
• Newly installed Dress Up Bolts engine bay kit (gold bolts)

Cons:

• Fuel level gauge is unreliable sometimes
• One wheel has a small bit of curb rash
• Couple small dings, small paint chips
• Front bumper has some paint clips on the lip and looks like it was repainted sometime in its past
• Trunk interior trim removed (will see if I have in storage)

[DamianN.]

[DamianN.]

I'm open to replacing back some OEM parts for a cheaper price. Just let me know

- OEM Wheels
- OEM Seats
- OEM Steering Wheel
- OEM Battery
- Remove harnesses and harness bar