turn signals and hazards do not work - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SidewaysJake · 07-11-2013, 12:03 AM

Hey guys. My turn signals and hazards do not work. They dont even show up on the cluster. My brights do not work either. Only my left headlight works, but i directly wired the right one to the left, and got it to work. any ideas on why all of this isnt working? they have not worked since I picked up my car about 3 months ago. (1990 SE hatch)

paintkilz · 07-11-2013, 01:18 AM

make sure your smj plugs are all teh way seated and the bolted down. i had a problem similar after i recently tucked my harness all i could get was headlights and nothing else...turned out someone hadnt seated the other SMJ plug to the rear from before i got it....seated it and it was fine.

jr_ss · 07-11-2013, 01:36 AM

Check your turn signal flasher module/relay. It's a round metal piece that should be plugged in near your fuses.

It looks like the one in the link below, however this is not the correct one for your car.

Buy Tridon (Novita Tech. Inc) Thermal Turn Signal Flasher 552 at Advance Auto Parts

07-11-2013, 12:03 AM	#1
SidewaysJake Join Date: Apr 2013 Location: Chicago Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	turn signals and hazards do not work Hey guys. My turn signals and hazards do not work. They dont even show up on the cluster. My brights do not work either. Only my left headlight works, but i directly wired the right one to the left, and got it to work. any ideas on why all of this isnt working? they have not worked since I picked up my car about 3 months ago. (1990 SE hatch)

07-11-2013, 01:36 AM	#3
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,410 Trader Rating: (35) Feedback Score: 35 reviews	Check your turn signal flasher module/relay. It's a round metal piece that should be plugged in near your fuses. It looks like the one in the link below, however this is not the correct one for your car. Buy Tridon (Novita Tech. Inc) Thermal Turn Signal Flasher 552 at Advance Auto Parts __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2013, 01:18 AM	#2
paintkilz Zilvia Member Join Date: Apr 2006 Location: des moines iowa Posts: 198 Trader Rating: (0) Feedback Score: 0 reviews	make sure your smj plugs are all teh way seated and the bolted down. i had a problem similar after i recently tucked my harness all i could get was headlights and nothing else...turned out someone hadnt seated the other SMJ plug to the rear from before i got it....seated it and it was fine.