|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
08-16-2005, 10:48 AM | #1 |
Leaky Injector
|
Are USDM Koiuki / Zenki harnesses the same?
I've seen a few harnesses on eBay that are specific for 95-96/97-98 and was wondering if there is a difference on the USDM ones.
Thanks
__________________
'92 G20 '96 240sx |
Sponsored Links |
08-16-2005, 11:01 AM | #2 |
Post Whore!
Join Date: Mar 2003
Location: New Jersey
Age: 43
Posts: 5,013
Trader Rating: (1)
Feedback Score: 1 reviews
|
no they are not.
in particular i know for a fact the two sensors on the coolant passage by the coolant air bleeder screw are different. i also believe the TPS sensor and the distributor harness plugs are different. there are probably other differences as well. |
08-16-2005, 11:38 AM | #3 |
Leaky Injector
|
Awesome, thank you, i appreciate it. But i was wondering if I could use a 98 KA24DE harness in my 96 S14 IF I were installing a S13 blacktop and having it wired by Yuri.
Thanks
__________________
'92 G20 '96 240sx |
08-16-2005, 12:01 PM | #4 |
Post Whore!
Join Date: Mar 2003
Location: New Jersey
Age: 43
Posts: 5,013
Trader Rating: (1)
Feedback Score: 1 reviews
|
i dont know who yuri is, but i know of at least one person who has used a 97 ka harness on a s13 redtop. it ran fine up until the owner crashed the car (repeatedly).
so if yuri knows what he/she is doing, then you can probably do it. |
Bookmarks |
|
|