Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 11-12-2018, 05:34 PM   #1
gary556
 
Join Date: Sep 2018
Location: Orlando, FL
Posts: 5
Trader Rating: (0)
gary556 is an unknown quantity at this point
Feedback Score: 0 reviews
Question Need help! fuel pump not working?

My fuel pump went bad so I replaced it with a Walbro fuel pump. I followed this guide to find my problems.

http://zilvia.net/f/showthread.php?t=108545

This is my problem now:
I followed this part of the guide:
"Check your fuse pump relay. Remove the relay. When you look at the pins of the relay, each pin is labeled with a number. Use a paper clip and jumper the 1 and 3 terminal on the wiring. If your fuel pump comes on with ignition, you have a bad relay."

I own a 1993 240sx that is manual swapped

Now that I have a working fuel pump, it won't get power. When I jumped terminal 1 and 3 with some alligator clips, it now gets power. I checked my relays and they are all working perfectly. But if jumping it with a clip gets it power, it couldn't be a wiring issue, could it?

I have no idea what the problem could be now, all opinions, input, or questions will help.


EDIT: Just checked the Voltage of the relays and all of them are getting 12.0+ volts while the one giving me problems is getting only 11.5V. Do the relays absolutely need 12V to trigger?

Last edited by gary556; 11-12-2018 at 08:34 PM.. Reason: more information
gary556 is offline   Reply With Quote
Sponsored Links
Old 11-12-2018, 06:58 PM   #2
anthony_240
Zilvia Junkie
 
anthony_240's Avatar
 
Join Date: Nov 2016
Location: Los Angeles
Age: 33
Posts: 489
Trader Rating: (3)
anthony_240 is an unknown quantity at this point
Feedback Score: 3 reviews
You also won’t get power to your pump and distributor if you have a bad eccs relay which on the s14 is right by the ecu, not sure about s13 and also there should be an efi fuse that will also affect power. Good luck


Sent from my iPhone using Tapatalk
anthony_240 is offline   Reply With Quote
Old 11-18-2018, 08:59 AM   #3
kyral
Zilvia Junkie
 
kyral's Avatar
 
Join Date: Nov 2012
Location: wisconsin
Age: 31
Posts: 448
Trader Rating: (7)
kyral is just really nicekyral is just really nicekyral is just really nicekyral is just really nicekyral is just really nicekyral is just really nicekyral is just really nicekyral is just really nicekyral is just really nice
Feedback Score: 7 reviews
How did you test the relays?
__________________
The Game
you lose haha
kyral is offline   Reply With Quote
Old 11-18-2018, 09:54 PM   #4
anthony_240
Zilvia Junkie
 
anthony_240's Avatar
 
Join Date: Nov 2016
Location: Los Angeles
Age: 33
Posts: 489
Trader Rating: (3)
anthony_240 is an unknown quantity at this point
Feedback Score: 3 reviews
Quote:
Originally Posted by kyral View Post
How did you test the relays?


Test light. Or if you don’t have one, switch it with a known working relay


Sent from my iPhone using Tapatalk
anthony_240 is offline   Reply With Quote
Old 11-20-2018, 04:31 PM   #5
apex
Zilvia FREAK!
 
apex's Avatar
 
Join Date: Aug 2004
Location: palm springs
Posts: 1,569
Trader Rating: (44)
apex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfectionapex is close to perfection
Feedback Score: 44 reviews
Had the same problem
Mine ended up being the wire on top of the pump
Came off
I think there 3or 4 wires top of the fuel pump
Assembly
__________________
Red Rocket
apex is offline   Reply With Quote
Old 11-20-2018, 05:17 PM   #6
240KA
Zilvia Addict
 
Join Date: Mar 2008
Location: OK
Age: 40
Posts: 809
Trader Rating: (6)
240KA is just really nice240KA is just really nice240KA is just really nice240KA is just really nice240KA is just really nice240KA is just really nice240KA is just really nice240KA is just really nice240KA is just really nice240KA is just really nice
Feedback Score: 6 reviews
my fuel pump wouldn't prime when i would key on
come to find out, one of the wires on the underside of the fuel pump hanger was loose. the 3 or 4 wires under there look like they're riveted on from factory (i only glanced at them while the homie soldered the connection), but they resemble a rivet. solder the loose connection and fuel pump would prime again.
240KA is offline   Reply With Quote
Old 07-05-2020, 05:02 PM   #7
gue399108
 
Join Date: Jan 2012
Location: Chicago, IL
Age: 32
Posts: 19
Trader Rating: (0)
gue399108 is an unknown quantity at this point
Feedback Score: 0 reviews
I have this issue. The wires on top of the fuel pump sending unit, the black one came off but I went to go ground it to the screw of the cap and pump won’t turn on. Any suggestions?
gue399108 is offline   Reply With Quote
Old 07-05-2020, 05:51 PM   #8
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,495
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
The black one needs to be connected to the pump that is the ground.
S14rebuild is offline   Reply With Quote
Reply

Bookmarks

Tags
fuel pump, s13, wiring


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:43 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net