Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 02-23-2009, 07:20 PM   #121
irie_slida808
 
Join Date: Feb 2009
Location: 808 HI
Age: 34
Posts: 20
Trader Rating: (0)
irie_slida808 is an unknown quantity at this point
Feedback Score: 0 reviews
ca motor info...

can anyone tell me wat igniter chips work with ca motor?...bought a motor and it has no igniter chip....and are there any other websites that specialize in ca18det motors for parts and info? please lmk thanks aloha
irie_slida808 is offline   Reply With Quote
Sponsored Links
Old 03-04-2009, 09:20 PM   #122
SCato
Leaky Injector
 
Join Date: Nov 2007
Location: Woodstock, Ga
Age: 33
Posts: 55
Trader Rating: (0)
SCato is an unknown quantity at this point
Feedback Score: 0 reviews
IIRC for the CA ignitor you can use a SR one just make sure you get the pigtails form the SR and splice the wires, same goes for q45 ignitor.

nico has a bigger section for CA's and if you ever have tech questions SXOC is full of info.
__________________
240Atlanta.com
SCato is offline   Reply With Quote
Old 05-14-2009, 11:01 AM   #123
Shmex
Nissanaholic!
 
Shmex's Avatar
 
Join Date: Dec 2007
Location: West Los to West Knox
Age: 33
Posts: 1,846
Trader Rating: (6)
Shmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfection
Feedback Score: 6 reviews
Send a message via AIM to Shmex
Just To Let people know, since i had a hard time finding the ACTUAL part numbers for the NGK series of Spark Plugs here they are...

NGK

Copper BCPR7es-11
Platinum PFR7A-11
Iridium BCPR7E-IX

Also the stainless steel braided ps line that askme4parts sells for the KA works better on the CA. just thought id let you guys know.

I LOVE THE CA!
__________________
Shmex is offline   Reply With Quote
Old 07-07-2009, 09:43 PM   #124
towyld2taim
 
Join Date: May 2008
Location: washington
Age: 29
Posts: 11
Trader Rating: (0)
towyld2taim is an unknown quantity at this point
Feedback Score: 0 reviews
Talking

hey guys im a noob to ca im looking at a car with one in it but it has a bad alt in it will one off a ka24e work or no i tried searching but couldnt find a direct answer thanks guys
towyld2taim is offline   Reply With Quote
Old 07-15-2009, 09:01 PM   #125
Slammed180
Zilvia FREAK!
 
Join Date: Oct 2007
Location: Calgary, Canada
Age: 32
Posts: 1,445
Trader Rating: (1)
Slammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of light
Feedback Score: 1 reviews
Quote:
Originally Posted by BlueKpS13 View Post
anybody know where to find and OEM CA18det harness? new or used? thanks
Man, I haven't checked this thread in ages.
I actually was inquiring about one of these not too long ago. My local Nissan dealership was still able to get a OEM harness new. It was something like $630 CDN, and 6-8 weeks away.

I also have an uncut CA18 engine harness if someone needs it.
__________________
Blow me, bitches.
Slammed180 is offline   Reply With Quote
Old 07-15-2009, 10:28 PM   #126
EP2009
BANNED
 
Join Date: Jun 2009
Location: IE n OC
Posts: 259
Trader Rating: (3)
EP2009 is an unknown quantity at this point
Feedback Score: 3 reviews
Good looking very interesting Info!!!
EP2009 is offline   Reply With Quote
Old 08-21-2009, 11:36 AM   #127
buddha
 
Join Date: Jul 2003
Location: new jersey
Age: 33
Posts: 35
Trader Rating: (0)
buddha is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Slammed180 View Post
I also have an uncut CA18 engine harness if someone needs it.
pm sent about harness
buddha is offline   Reply With Quote
Old 10-01-2009, 02:17 AM   #128
1GayDrifter
Zilvia Junkie
 
Join Date: Nov 2008
Location: cypress, H-TOWN
Posts: 303
Trader Rating: (5)
1GayDrifter is an unknown quantity at this point
Feedback Score: 5 reviews
just bought a ca18det and its going in my kouki. i already know to replace to oil pump, water pump timing belt stuff too. but i was planning boosting 9-10 psi on stock turbo with ust FMIC, hks bov, greddy intake and dsm 450cc. how much hp am i looking at and is that safe for stock internals?
1GayDrifter is offline   Reply With Quote
Old 10-01-2009, 08:38 AM   #129
shogun!
Zilvia Junkie
 
shogun!'s Avatar
 
Join Date: Mar 2005
Location: Sweden
Posts: 367
Trader Rating: (0)
shogun! is on a distinguished road
Feedback Score: 0 reviews
Put on a T28, a Z32 AFM and a good chip and you are up in the region of 300 BHP

The pistons tend to have their limit somewhere in that area and the rods give in at about 4-450 BHP.
__________________
My +700hp RS13
shogun! is offline   Reply With Quote
Old 11-30-2009, 12:41 AM   #130
Geezy
Zilvia Junkie
 
Geezy's Avatar
 
Join Date: Jul 2009
Location: Las Vegas
Posts: 301
Trader Rating: (5)
Geezy is an unknown quantity at this point
Feedback Score: 5 reviews
are the KA24DE motor mounts the same for the CA???
Geezy is offline   Reply With Quote
Old 11-30-2009, 01:41 AM   #131
sLiDewAys
Nissanaholic!
 
Join Date: May 2003
Location: San Francisco, Ca
Age: 34
Posts: 1,779
Trader Rating: (4)
sLiDewAys is an unknown quantity at this point
Feedback Score: 4 reviews
all the s13/s14/s15 mounts are near identical. the ca18 mounts do tilt a tad bit to the exhaust side but I have never heard anything negative about this. SR/KA mounts are fine!
__________________
sLiDewAys is offline   Reply With Quote
Old 12-04-2009, 03:22 AM   #132
sLiDewAys
Nissanaholic!
 
Join Date: May 2003
Location: San Francisco, Ca
Age: 34
Posts: 1,779
Trader Rating: (4)
sLiDewAys is an unknown quantity at this point
Feedback Score: 4 reviews
I've got a USDM ca18de NISSAN Repair Manual I used to rebuild my engine. full of torque specs. really came in handy when i tore mine a part and rebuilt.

$25.00

__________________
sLiDewAys is offline   Reply With Quote
Old 12-10-2009, 07:02 PM   #133
Slammed180
Zilvia FREAK!
 
Join Date: Oct 2007
Location: Calgary, Canada
Age: 32
Posts: 1,445
Trader Rating: (1)
Slammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of light
Feedback Score: 1 reviews
Quote:
Originally Posted by Geezy View Post
are the KA24DE motor mounts the same for the CA???
If you use KA/SR motor mounts on a CA18, it'll raise the engine 0.75". This will make having a strut tower bar almost impossible.

Just get a set of CA18 Nismo mounts. They work well enough.
__________________
Blow me, bitches.
Slammed180 is offline   Reply With Quote
Old 12-28-2009, 02:42 PM   #134
Shmex
Nissanaholic!
 
Shmex's Avatar
 
Join Date: Dec 2007
Location: West Los to West Knox
Age: 33
Posts: 1,846
Trader Rating: (6)
Shmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfectionShmex is close to perfection
Feedback Score: 6 reviews
Send a message via AIM to Shmex
or you can put spacers on your strut bar on the intake side. Or get the strut bars that have that slant in em.

anyways, anybody know where i can get new coils? or will the 88 pulsar nx coilpacks work?
__________________
Shmex is offline   Reply With Quote
Old 12-28-2009, 02:53 PM   #135
Antihero983
Post Whore!
 
Antihero983's Avatar
 
Join Date: Feb 2005
Location: Gilmanton, NH
Age: 35
Posts: 4,350
Trader Rating: (2)
Antihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfectionAntihero983 is close to perfection
Feedback Score: 2 reviews
Send a message via AIM to Antihero983 Send a message via MSN to Antihero983
fun fact, you can put a CA18DET exhaust cam in place of the intake cam, and it helps with the powerband.


How To: Exhaust Cam Swap and Cam Seal Replacement: CA18DE / CA18DET Forum: Nissan Forums / Infiniti Forums - NICOclub
__________________

Antihero983 is offline   Reply With Quote
Old 12-28-2009, 11:57 PM   #136
Slammed180
Zilvia FREAK!
 
Join Date: Oct 2007
Location: Calgary, Canada
Age: 32
Posts: 1,445
Trader Rating: (1)
Slammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of lightSlammed180 is a glorious beacon of light
Feedback Score: 1 reviews
Quote:
Originally Posted by Shmex View Post
or you can put spacers on your strut bar on the intake side. Or get the strut bars that have that slant in em.

anyways, anybody know where i can get new coils? or will the 88 pulsar nx coilpacks work?
88-89 Pulsar SE coilpacks from the CA18DE will work.

And I have a STB with the slant in it, and it still didn't clear with SR/KA nismo mounts. And by spacing the STB, it didn't clear the hood. So avoid SR/KA mounts with the CA if you plan on running a strut tower bar.
__________________
Blow me, bitches.
Slammed180 is offline   Reply With Quote
Old 03-11-2010, 11:28 AM   #137
DALAZ_68
not giving a fuck
 
DALAZ_68's Avatar
 
Join Date: Apr 2007
Location: Los angeles
Age: 33
Posts: 15,070
Trader Rating: (104)
DALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfection
Feedback Score: 104 reviews
Send a message via AIM to DALAZ_68 Send a message via Yahoo to DALAZ_68
Starter info
Overnight AutoParts Catalog - N16900

you need to use a nut on one of the holes that does not come threaded like the stock one, could possibly helicoil the fucking thing if ur motor isnt installed...
__________________
LOL 240... whats better than 1? 5 1's ...lol
PSN
& XBL GT : Wh0pp3r68

CLUB LEXUS : Wh0pp3r
DALAZ_68 is offline   Reply With Quote
Old 03-30-2010, 04:35 PM   #138
driftmeister
Leaky Injector
 
Join Date: Sep 2009
Location: Cape Town South Africa
Age: 35
Posts: 99
Trader Rating: (0)
driftmeister is an unknown quantity at this point
Feedback Score: 0 reviews
hi guys

im looking to fit a Z32 AFM to a CA18det
its got a 255lph fp and a 63mm freeflow exhaust no cat
oh and a HKS cone filter
how do i do this ?
driftmeister is offline   Reply With Quote
Old 03-30-2010, 04:36 PM   #139
DALAZ_68
not giving a fuck
 
DALAZ_68's Avatar
 
Join Date: Apr 2007
Location: Los angeles
Age: 33
Posts: 15,070
Trader Rating: (104)
DALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfection
Feedback Score: 104 reviews
Send a message via AIM to DALAZ_68 Send a message via Yahoo to DALAZ_68
Quote:
Originally Posted by driftmeister View Post
hi guys

im looking to fit a Z32 AFM to a CA18det
its got a 255lph fp and a 63mm freeflow exhaust no cat
oh and a HKS cone filter
how do i do this ?

using google...simple...

also this is a facts thread, not a help me how to do this thread...
__________________
LOL 240... whats better than 1? 5 1's ...lol
PSN
& XBL GT : Wh0pp3r68

CLUB LEXUS : Wh0pp3r
DALAZ_68 is offline   Reply With Quote
Old 03-30-2010, 04:42 PM   #140
driftmeister
Leaky Injector
 
Join Date: Sep 2009
Location: Cape Town South Africa
Age: 35
Posts: 99
Trader Rating: (0)
driftmeister is an unknown quantity at this point
Feedback Score: 0 reviews
thanks guy
no worries
driftmeister is offline   Reply With Quote
Old 03-30-2010, 05:55 PM   #141
sLiDewAys
Nissanaholic!
 
Join Date: May 2003
Location: San Francisco, Ca
Age: 34
Posts: 1,779
Trader Rating: (4)
sLiDewAys is an unknown quantity at this point
Feedback Score: 4 reviews
Quote:
Originally Posted by driftmeister View Post
hi guys

im looking to fit a Z32 AFM to a CA18det
its got a 255lph fp and a 63mm freeflow exhaust no cat
oh and a HKS cone filter
how do i do this ?


You need a Air/ Fuel Controler... SAFC will work! or a simple reflash.. EEPROM/ deutchworks ect...

Rule of thumb is if you change anything having to do with fuel or air you need a reflash or piggyback!
__________________
sLiDewAys is offline   Reply With Quote
Old 04-12-2010, 12:39 PM   #142
DALAZ_68
not giving a fuck
 
DALAZ_68's Avatar
 
Join Date: Apr 2007
Location: Los angeles
Age: 33
Posts: 15,070
Trader Rating: (104)
DALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfection
Feedback Score: 104 reviews
Send a message via AIM to DALAZ_68 Send a message via Yahoo to DALAZ_68
SR20DE RWD clutches work with stock CA starters, and apperantly dont need CA bellhousing modiffication to fit...WOOO
__________________
LOL 240... whats better than 1? 5 1's ...lol
PSN
& XBL GT : Wh0pp3r68

CLUB LEXUS : Wh0pp3r
DALAZ_68 is offline   Reply With Quote
Old 04-20-2010, 10:42 AM   #143
DALAZ_68
not giving a fuck
 
DALAZ_68's Avatar
 
Join Date: Apr 2007
Location: Los angeles
Age: 33
Posts: 15,070
Trader Rating: (104)
DALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfection
Feedback Score: 104 reviews
Send a message via AIM to DALAZ_68 Send a message via Yahoo to DALAZ_68
Incase ARP discontinues em

CA18det Flywheel bolt Specs
M10x1.0 30mm

might need shortening with some flyqheels though...which i dont know, just what ive heard...
__________________
LOL 240... whats better than 1? 5 1's ...lol
PSN
& XBL GT : Wh0pp3r68

CLUB LEXUS : Wh0pp3r
DALAZ_68 is offline   Reply With Quote
Old 05-03-2010, 03:23 AM   #144
shogun!
Zilvia Junkie
 
shogun!'s Avatar
 
Join Date: Mar 2005
Location: Sweden
Posts: 367
Trader Rating: (0)
shogun! is on a distinguished road
Feedback Score: 0 reviews
I have put up lots of information about the ca18det in my project thread.
Have a look, you may find answers to most of your questions.

http://zilvia.net/f/s-chassis/281673...p-extreme.html
shogun! is offline   Reply With Quote
Old 05-19-2010, 01:05 PM   #145
DALAZ_68
not giving a fuck
 
DALAZ_68's Avatar
 
Join Date: Apr 2007
Location: Los angeles
Age: 33
Posts: 15,070
Trader Rating: (104)
DALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfection
Feedback Score: 104 reviews
Send a message via AIM to DALAZ_68 Send a message via Yahoo to DALAZ_68
www.impactblue.org great site for engine pics and wat nots...
__________________
LOL 240... whats better than 1? 5 1's ...lol
PSN
& XBL GT : Wh0pp3r68

CLUB LEXUS : Wh0pp3r
DALAZ_68 is offline   Reply With Quote
Old 07-13-2010, 12:16 PM   #146
sxxtbal
 
Join Date: Jul 2008
Location: washington
Posts: 6
Trader Rating: (0)
sxxtbal is an unknown quantity at this point
Feedback Score: 0 reviews
anyone know what size the tranny bolts and flywheel bolts are for the ca18det? I searched around but haven't found anything on it.
sxxtbal is offline   Reply With Quote
Old 07-13-2010, 12:34 PM   #147
DALAZ_68
not giving a fuck
 
DALAZ_68's Avatar
 
Join Date: Apr 2007
Location: Los angeles
Age: 33
Posts: 15,070
Trader Rating: (104)
DALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfectionDALAZ_68 is close to perfection
Feedback Score: 104 reviews
Send a message via AIM to DALAZ_68 Send a message via Yahoo to DALAZ_68
dude...i just posted the flywheel bolts like 3 post up...

as far as trans bolts...ebay?
__________________
LOL 240... whats better than 1? 5 1's ...lol
PSN
& XBL GT : Wh0pp3r68

CLUB LEXUS : Wh0pp3r
DALAZ_68 is offline   Reply With Quote
Old 08-01-2010, 04:02 PM   #148
[email protected]
Zilvia Addict
 
S@nt0s's Avatar
 
Join Date: Jan 2008
Location: 310 all day!
Age: 38
Posts: 912
Trader Rating: (4)
S@nt0s is an unknown quantity at this point
Feedback Score: 4 reviews
anyone need a CA? i have a complete Longblock and bell housing
S@nt0s is offline   Reply With Quote
Old 08-01-2010, 06:28 PM   #149
g35gabby
Nissanaholic!
 
g35gabby's Avatar
 
Join Date: May 2010
Location: lake mary, Fl
Age: 32
Posts: 1,954
Trader Rating: (26)
g35gabby is an unknown quantity at this point
Feedback Score: 26 reviews
I didnt realize this was a FS section?
g35gabby is offline   Reply With Quote
Old 08-01-2010, 06:49 PM   #150
[email protected]
Zilvia Addict
 
S@nt0s's Avatar
 
Join Date: Jan 2008
Location: 310 all day!
Age: 38
Posts: 912
Trader Rating: (4)
S@nt0s is an unknown quantity at this point
Feedback Score: 4 reviews
Quote:
Originally Posted by g35gabby View Post
I didnt realize this was a FS section?
does it state anything about selling? no its a spare motor for someone who might need it.
S@nt0s is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™