White Bunny problems!!!!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

panda240_4life · 07-17-2013, 09:18 AM

I just got a 5-speed from a friend to do the conversion from auto. He gave me everything for a white bunny set up as well. However, when i put it all together it would let me put it in gear. No grinding or anything. It just wouldnt let me almost like something was stopping it. Adjusted the pedal and bled the SH*T out of the line but still nothing PLZ HELP!!!!!!!!!!!!!

Croustibat · 07-17-2013, 02:19 PM

maybe the disc is mounted the wrong way ? i dont know, your question is very vague.

MrSanchez925 · 07-17-2013, 02:22 PM

sounds like you installed the clutch wrong.

lbogkush · 07-17-2013, 02:50 PM

is the fork put on right

panda240_4life · 07-18-2013, 03:05 PM

Ok, so i got it running but now the reverse lights and the speedometer doesnt work. plz help

panda240_4life · 07-18-2013, 03:06 PM

Turns out the throw out bearing was bad so now it running but like i said^^^ speedo and reverse lights dont work...need help

Ilya · 07-18-2013, 03:10 PM

....did you connect the wires?

panda240_4life · 07-18-2013, 03:24 PM

^^^Yes i tripple checked the and they ARE connected, they arent pinched but still nothing.

Ilya · 07-21-2013, 12:42 AM

Swap out the speed sensor for a known good one from a buddy or someone you know. See if that helps...

07-17-2013, 09:18 AM	#1
panda240_4life Join Date: May 2013 Location: Round Rock, TX Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	White Bunny problems!!!!!!!! I just got a 5-speed from a friend to do the conversion from auto. He gave me everything for a white bunny set up as well. However, when i put it all together it would let me put it in gear. No grinding or anything. It just wouldnt let me almost like something was stopping it. Adjusted the pedal and bled the SH*T out of the line but still nothing PLZ HELP!!!!!!!!!!!!! __________________ Speed Racer OUT!!!!!!!!!!

07-18-2013, 03:05 PM	#5
panda240_4life Join Date: May 2013 Location: Round Rock, TX Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Ok, so i got it running but now the reverse lights and the speedometer doesnt work. plz help __________________ Speed Racer OUT!!!!!!!!!!

07-18-2013, 03:06 PM	#6
panda240_4life Join Date: May 2013 Location: Round Rock, TX Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Turns out the throw out bearing was bad so now it running but like i said^^^ speedo and reverse lights dont work...need help __________________ Speed Racer OUT!!!!!!!!!!

07-18-2013, 03:24 PM	#8
panda240_4life Join Date: May 2013 Location: Round Rock, TX Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	^^^Yes i tripple checked the and they ARE connected, they arent pinched but still nothing. __________________ Speed Racer OUT!!!!!!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-17-2013, 02:19 PM	#2
Croustibat Nissanaholic! Join Date: Aug 2011 Location: France - Toulouse Age: 43 Posts: 1,851 Trader Rating: (0) Feedback Score: 0 reviews	maybe the disc is mounted the wrong way ? i dont know, your question is very vague.

07-17-2013, 02:22 PM	#3
MrSanchez925 Zilvia Junkie Join Date: Feb 2012 Location: Martinez, Ca Age: 35 Posts: 412 Trader Rating: (4) Feedback Score: 4 reviews	sounds like you installed the clutch wrong.

07-17-2013, 02:50 PM	#4
lbogkush Leaky Injector Join Date: Jan 2012 Location: Long Beach Posts: 116 Trader Rating: (3) Feedback Score: 3 reviews	is the fork put on right

07-18-2013, 03:10 PM	#7
Ilya Zilvia Addict Join Date: Jan 2008 Location: San Diego Age: 34 Posts: 712 Trader Rating: (2) Feedback Score: 2 reviews	....did you connect the wires?

07-21-2013, 12:42 AM	#9
Ilya Zilvia Addict Join Date: Jan 2008 Location: San Diego Age: 34 Posts: 712 Trader Rating: (2) Feedback Score: 2 reviews	Swap out the speed sensor for a known good one from a buddy or someone you know. See if that helps...