AFC not getting TACH SIGNAL - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gripDRIFTschassis · 08-22-2008, 08:43 PM

I know a few are gonna flame for me using an AFC......

I installed the AFC NEO and everything is working fine its just that its not getting a tach signal and i dont want to tune it with it only going by the TPS.. just need some advice..

***Have a SOHC Cluster in the car..also wanted to know if me not having the DOHC Cluster effects the AFC also not to read RPM'S***

THANKS..

yokotavia · 08-23-2008, 08:56 AM

check the wire connection on the tach signal wire and triple check to make sure both wires are the correct color

good luck

Massimo Power · 08-23-2008, 09:40 AM

its definetly the wire that reads from the ecu.. you need to check that...

gripDRIFTschassis · 08-25-2008, 11:00 AM

kinda stupid but i caught it....
cluster just needed to be changed to the DOHC....

THANKS

08-22-2008, 08:43 PM	#1
gripDRIFTschassis Join Date: Jul 2008 Location: Brooklyn Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	AFC not getting TACH SIGNAL I know a few are gonna flame for me using an AFC...... I installed the AFC NEO and everything is working fine its just that its not getting a tach signal and i dont want to tune it with it only going by the TPS.. just need some advice.. *Have a SOHC Cluster in the car..also wanted to know if me not having the DOHC Cluster effects the AFC also not to read RPM'S* THANKS..

08-23-2008, 08:56 AM	#2
yokotavia Zilvia Addict Join Date: Dec 2007 Location: The land of bosos and schoolgirls Posts: 679 Trader Rating: (16) Feedback Score: 16 reviews	check the wire connection on the tach signal wire and triple check to make sure both wires are the correct color good luck __________________ Banana boat chronicles

08-23-2008, 09:40 AM	#3
Massimo Power Zilvia Junkie Join Date: Jul 2008 Location: Corona, CA Posts: 322 Trader Rating: (8) Feedback Score: 8 reviews	its definetly the wire that reads from the ecu.. you need to check that... __________________ www.massimopower.com PH: 1(951)402-5386 EM:[email protected] Special Thanks To: www.aeperformance.com www.domospeed.com/blog For Their Continued Support

08-25-2008, 11:00 AM	#4
gripDRIFTschassis Join Date: Jul 2008 Location: Brooklyn Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	kinda stupid but i caught it.... cluster just needed to be changed to the DOHC.... THANKS